FlashForge Adventurer 5m (AD5M) - Blink Mini 1 Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bolt on swivel camera mount for the Blink Mini 1 camera on the AD5M.
- Rating
- 4.75 / 5
- Likes
- 76
- Downloads
- 383
- Makes
- 3
- Views
- 2,897
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Welcome, welcome!
Here is a camera mount for the Blink Mini 1 onto our AD5M. I modified a guard plate from the minimal enclosure since it's what's on my printer. If you have no enclosure or have the minimal then this can work for you.
During my testing, I noted there's a bit of slop in the hinge I used. Printing or using a washer helped if the sag is an issue.
I cut a bevel into the camera arm so it can be oriented onto that for layer orientation and easier printing.
I already have Blink in my home, so adding this camera was a nice solution that enabled me to check my prints when out and about.
Enjoy. Any issues please let me know. I am but a humble mechanic, so I have a walnut for a brain.