12.7mm (1/2 inch) Tube Clamp with End Plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tube clamp w end plug that fits on a tube (in my case, an extruded aluminum tube). Plug prevents dampness inside tube.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 40
- Makes
- 0
- Views
- 284
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A few of my projects include use of aluminum tubing. This simple and effective tube clamp (holder) and removable end plug hold well and snug. My project tube is 12.7mm (O.D.) (½ inch) aluminum. May work well with other tubing materials of similar outer and inner dimensions.
Clamp uses an M3 12 or 14mm screw and a square nut. Holds great!!
Plug holds ok by itself inside the tube end, but is more secure and moisture resistant with a couple of wraps of teflon tape. Tab on the end of the plug is a convenient handle to adjust, twist and remove the plug if needed.
I will use these parts as components of a more-involved design project.