1 / 2
12.7mm (1/2 inch) Tube Clamp with End Plug — zdjęcie 1
1 / 2

12.7mm (1/2 inch) Tube Clamp with End Plug

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tube clamp w end plug that fits on a tube (in my case, an extruded aluminum tube). Plug prevents dampness inside tube.

Ocena
5 / 5
Polubienia
1
Pobrania
40
Wydruki
0
Wyświetlenia
284
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A few of my projects include use of aluminum tubing.  This simple and effective tube clamp (holder) and removable end plug hold well and snug.  My project tube is 12.7mm (O.D.) (½ inch) aluminum.  May work well with other tubing materials of similar outer and inner dimensions.

Clamp uses an M3 12 or 14mm screw and a square nut.  Holds great!!

Plug holds ok by itself inside the tube end, but is more secure and moisture resistant with a couple of wraps of teflon tape.  Tab on the end of the plug is a convenient handle to adjust, twist and remove the plug if needed.

I will use these parts as components of a more-involved design project.

Tagi