Multiboard Charger / Transformer holder (Europlug)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.38 – €1.68 net (excluding VAT)
For file: Charger holder_0.4n_0.2mm_PLA_MK4IS_58m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.53 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 57.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Multiboard holder for chargers / transformers integrated with the Europlug electric plug
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 38
- Makes
- 1
- Views
- 399
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
The holder uses the flexible MultiConnect connector. Just attach two MultiConnect connectors to your board and then mount the holder on these connection points.
Recommended print settings (same as Multiboard defaults):
- 3 wall perimeters in wall thickness
- 15% infill
- No supports needed
- 0.2 mm layer height
- 0.40 mm nozzle
- PLA
Thanks to Jonathan (KeepMaking) for creating multiboard and to David D for creating the flexible MultiConnect connectors.
The container used for storing the cable on the pictures can be found here:
Magic Container - Multiboard
The peg connector that connects the Ryobi charger on the pictures can be found here:
Multiboard connector for a regular screw mounting point