45 models
Thanks for the great design Alex!!! remix from: https://www.thingiverse.com/thing:4618679 I add some springs for tighter fit the euro plug I added V2 with larger springs for easier printing with petg or other materials. usage: Print…
Remix of https://www.thingiverse.com/thing:4618679 Added 4 small bars for a slightly tighter yet variable fit. GIF shows method of removal. Also added a version that shuts the outlet entirely as a dust cap.
A remix to accomodate the Europlug version of the Steam Deck USB-C Charger into the Deck Case. As the version remixed from, it still holds the tight and press fit in the bottom and also should accept the US Plug version of the charger.…
I hate how much these adapters cost if you want to buy them online. 1h print time, didn't really optimize it. VERY snug fit, you have to use quite some force! Use the holes on the sides to grip the Adapter with some pliers if you want to…
I got tired of my chargers floating around in a drawer. Thats why I made this to keep them organized. They fit quiet loosely so you can take them in and out easily. Let me know if you have an idea on how to improve this. Category:…
This is a cable winder to clip on the prongs of a europlug. It is designed in a way you can use it without unwinding the whole cable, while being space efficient for storage. It has diameter-staggered cable clips, I use one for the…
Current version of this project works by pressing against thickened fragment at pins base - if those are absent from your charger the cap might be completely loose. Indented lines on the sides make for surprisingly good grip. Printing:…
With this remix, the adapter can be easily removed from the power socket.
Thanks to user feedbacks, and update is on its way It can already be tested. Files are in the beta folder. Here are the changes: much better software, it is now a FreeCAD project since it is a software my values align with (open source,…
This model is a Remix from this model from kulfürst: https://www.printables.com/model/279422-europlug-schuko-adapter-and-schuko-dust-cap The europlug Schuko adapter was slightly adapted with holes for screws. I made it for the Oral B…
This adapter allows heavier devices to stay in the power socket. For both French and German Schuko socket types.
Should be printed of temperature resistant fillament… at least ASA/ABS. <<PLA is a fire hazard for this type of use>>
I use these holders together with the 15x40mm version of the Multiboard tool holders in various sizes to keep the charger cables organized. Requires one of the Multiboard Snaps to click into. Recommended print settings (same as multiboard…
This is a simple remix to make an actual plugin adapter for Europlug, so that it's more sturdy and harder to remove when plugging in to a Schuko CEE 7-3 (EU) connector. It's easy to print and no supports are needed. It is designed to work…
Cover to slip over the plug pins for a Type C euro plug. As expected it fits compatible ones like my Brazilian plugs. My USB / adapter brick plugs do not fold over. It is just a matter of time before they get damaged in transit or damage…
I made this strip to organize my USB AC/DC power adapters, USB cables, USB keys and similar items. This project has been designed to accomodate power adapters with standard europlugs, but strips for different plugs will be made if…
I was looking for this design but did not find it, so I made it according to the official dimensions. You could use this model to create your own solution.
This is a small and quick print ( around 30 min per piece at .3mm layer height! ) You wrap the cable around the adapter, pass the cable through the hold and put the cap on the prongs. The cap fits with friction on the prong housing and…
I carry some fantastic laptop chargers in my backpack, but their power plugs are very delicate. To protect the plugs, I designed this cover. It fits a Europlug and comes in two versions – a looser one and a tighter one.
Protect you plug's pins with this little cap. Printed with PLA. Check the Swiss T11 plug here .
This tool ensures that devices with built-in Europlugs (e.g. mosquito repellers, Dyson power supplies, compact adapters) sit straight and stable in Schuko wall sockets. No more tilted plugs! Simply attach the adapter to the device and…
⚠️ Disclaimer: this project is coming in contact with 220V electricity. Be careful when doing any changes to your power outlets (because you or others may die). Old Swiss sockets do truly badly when supporting a plug. This is a…
These are wall mountable holders for adapters that use the Europlug standard popular throughout Europe. Adapters are somewhat messy to store, and this allows you to organise them tidily in your IT room or office or wherever by wall…
I designed this magnetic holder for 4 European plugs. My magnets have the size 20 x 8 x 9 cm. I embedded the magnets inside the model, so just use a Pause command and insert the magnets. Prints completly without supports
Model is created with dune3d, you can find the sources here: https://git.clerie.de/clerie/eurostecker-zu-schuko-adapter
The holder uses the flexible MultiConnect connector. Just attach two MultiConnect connectors to your board and then mount the holder on these connection points. Recommended print settings (same as Multiboard defaults): 3 wall perimeters…
This model holds a Type-C plug (Europlug) snugly and is angled, such that the plug can easily be removed. The back is flat, which can be used to glue the holder to a surface. For other mounting options and questions, please leave a comment.
Wall mount for the Oral-B iO series electrical toothbrush. I couldn't find any that would fit a vertical Europlug, so I designed one for myself. The plug is held by two clamps. The clamps are partially detached from the main body so they…
I have discovered recently, that they don't sell Europlug sockets in the local shops, preferring to offer many kinds of power sockets with grounding (much bigger in size). To be clear, I needed a socket for Europlug (CEE 7/16 Alternative…
A simple remix, because the plug of my homepod was a little too big for the original adapter to use it with the lovely "Wall Mount Plug" . Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: No Resolution: 0.20…
I printed in 0,3mm layer PETG 100% infill for durability and fast printing. For stealth print it with color as close as possible to power outlet color. Plug don't need any supports but key does. The plug works fine with old euro plug…
No supports, No brim, No rafts. Layer height: 0.25 Wall generator: Arachne Infill: 15% Grid Top/bottom layers: 3 Wall loops: 3 Orca 2.2.0. Print time: 27 min
Holder for Europlug EN 50075, with spring clamp.
Organizer for usb-charger with USB/Lightning cable. With cover to fix the cable.
I've made this small charger holder/protector to save the contacts from bending in the backpack. The pictures are printed in PLA with 0,2 layer hight. On the bottom there are 4 holes (6,2 x 2,5mm) to insert some magnets (6 x 2mm). Feel…
Tired of your Europlug constantly losing contact with those circular power sockets? Fear not, for this is the adapter you need! It can be hard to insert but it fits very snugly and holds the plug well. I don't think the slicer/printer…
Created this small spacer for one of my old Xiaomi Global 67W charger, using an Europlug to US adapter when fully inserted wouldn't make proper contact which made me “hang” the charger from the adapter to make it work. Now I can just plug…
English: I made this dustcover for Europlug Sockets. Inspired by this model. https://www.printables.com/model/677515-dust-cover-for-schuko-socket-type-f-cee-74 ______________________________________________________________ Deutsch: Ich…
A protector for two-pole mains power plugs, especially for heavy plugs (power supplies). It protects the power poles from getting bent or broken off when dropped. For the best protection, print it with flexible filament, e. g. TPU 95A.
This Multibin Insert holds power supplies or similar items with Europlugs. You can use it on its own or add either a 1x1 or 2x1 CU Multiboard Shell to fit into the Multiboard grid. Print Settings Use the typical Multiboard print settings:…
Simple way to organize your europlug cables. Designed for tangle-free storage of different powerplugs for charging devices.
Danish type K sockets don't have enough depth to support Europlugs. As a consequence, power bricks connected to a wall end up dangling, get loose over time and are very vulnerable to mild accidental impacts that bend their pins. This…
Remix of https://www.thingiverse.com/thing:4618679 Added 4 small bars for a slightly tighter yet variable fit. GIF shows method of removal. Also added a version that shuts the outlet entirely as a dust cap.
