RJ-45 Network Jack Dust Cover Plug CCD Version
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: RJ-45_Dust_Plug_v15-PLA_0.4n_0.2mm_PLA_MK4_13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
RJ-45 Network Jack Dust Cover Plug Wanted a good one, ended up designing my own. CCD Version
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 150
- Makes
- 9
- Views
- 1,056
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
RJ-45 Network Jack Dust Cover Plug
Wanted a good one, ended up designing my own.
I wanted something that emulates a RJ-45 plug and stays in place.
Sample blue parts printed in Polymaker PRO PLA.
Tab actual locks parts in place. Tab also releases dust cap when squeezed.
Nozzle Temp 220 deg C
Plate Temp 60 deg C
Recommended Material : PLA
Nozzle Diameter : 0.4mm
Layer Height : 0.2mm
Support : NO
In-fill Percentage : 25% Gyroid
Vertical Layers : 3
Bottom Layers : 3
Top Layers : 5
This is a Case CAD Designed version. (CCD version).
3 print versions available, single part, 12 part matrix, and 48 part matrix versions.
These parts have successfully tested on the following devices. Will work with 99.9% of RJ-45 ethernet ports out there.
Mikrotik Router / Switch
Motorola CC-HUB
JUNIPER EX-4400 Switch
Juniper EX-4100 Switch
Motorola DSC-8000 Site Controller for K Core.
