Counting matching models…
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This is a remix of Helasius drillguide - https://www.thingiverse.com/thing:4839621 However, I needed it to be able to drill on a square corner. As per the original description, it fits sizes 3, 4, 5, 6, 8, and 10, with holes at 90º and…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
So this is a thin and minimal protection case for Apple Watch Series 7 45mm. Prints in 14m and uses only 1,4g of material.
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
45mm and 65mm 0.2mm thick square for calibrating your first layer, the presliced files are set to pause at 160c extruder temp to auto bed level. Updated for 0.4mm and 0.6mm Nozzle version Gcode files and 65mm size
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Small Parts Container / Organizer I made those little containers to organize my screws and nuts drawer. The smallest one is 45mm x 45mm small and the others come in multiples of that: 2x1, 2x2 and 3x1. Best printed in 0.3mm layer height…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
I made these 3D models to facilitate the attachment of the ADXL345 USB accelerometer to both the head and bed of the Anycubic Kobra 2 Neo. These models serve as effective solutions for integrating the accelerometer, in order to measure…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
RJ-45 Network Jack Dust Cover Plug Wanted a good one, ended up designing my own. I wanted something that emulates a RJ-45 plug and stays in place. Sample blue parts printed in Polymaker PRO PLA. Tab actual locks parts in place. Tab also…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This Speed Loader slides over the top of the magazine for controlled movement down the mag for easy loading.
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
This remix allows the buffer to be fastened to the shelve using the existing method, but oriented in a 45 degrees angle. Some background: With the great designed MMU slot buffer by Martin_J placed on a shelf above my printer I experienced…
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant
Fraesschablone Netzschalter / Netzfilter - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich 2 polige Netzschalter bzw. Netzfilter eingebaut. Abmessungen 47mm x 28mm Abstand vom Rand bis Aussparung: ca. 45x45mm Ecke Platte…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
I wanted a background for my LL928, so I've created the small one, one time Lego 3456 wide. Then I've thougt that it is to small so I've created a version that is 3x Lego 3456 to still fit my Ikea BESTÅ Logo can be easily replaced, I've…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET
An alternative baby phone bed mount for the baby phone Philips Avent SCD845/26: The holder can be mounted anywhere on the side of the baby bed. In addition to the two parts, you need four M3 screws with nuts. Suitable for baby beds with…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
to hold a 45 dg hook
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
Der eingebaute Ständer der Uhr, um sie auf ein Sideboard oder einen Schrank zu stellen hat leider einen viel zu flachen Winkel und lässt sich auch nicht einstellen. Daher habe ich diesen einfachen und schlichten Sockel entworfen, der die…
Print approx. €2.71–€3.32 excl. taxPreliminary estimate for one variant
Ethernet (RJ45) Port Dust Cover cap with grip for easy removal. Just added: New slimmer/narrow model for switches with closely spaced ports. Check out all other port covers: USB-A port cover -…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use…
Summary Smart Dry Box designed for the Ikea Samla 45l box. It supports 6 spools, each buffered by a fully enclosed wheel buffer utilizing the complete box height. Spools, Buffers and Desiccant containers all can easily be loaded from the…
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…
i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…
Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…
Introducing my meticulously designed 3D model holster crafted specifically for the Ruger Mark 4 22/45 Tactical with a 4.4" barrel . Precision-engineered, the holster is molded to perfectly fit the contours of the Ruger Mark 4 22/45…
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 45 to 46mm so it should fit anywhere a standard vacuum cuff would, and connect to the CAMLOCK end. It may be a slightly loose fit depending on the length of taper…
needed a tablecloth clamp for a 45mm thick table, remixed the great design by bramsky, and it works perfectly Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20 Infill: 50 Filament: Prusament PETG…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
This is a magazine loader/thumb saver/speed loader for the Ruger Mark 1,2,3,&4 (I,II,III,IV).
8/18/2024: Updated pictures to match the updated stl and CAD files. Printing with organic supports and no top interface layer provides the best results I have found. 8/9/2024: Printing the fillet edges has been particular difficult to get…
A simple 2in1 mount for an ADXL345 on the Creality Ender 3 S1 / Plus / Pro or all Sprite extruders / Pro.
This is a holster for the Ruger 22/45 Mark IV Lite pistol. It can accept a suppressor as that is how I carry mine. The hood is a little thinner than the original model, I tried to squeeze it and banged it around with no issues. I suggest…
A 100-round waterproof rugged ammo box to store/transport your 5.56x45 ammunition.
Holds up to 45 bits. Loose tolerance for easy in/out movement. Suited for 6.35mm hex bits. Nice compact fit for tool drawers or just sitting on a desktop. Size (L)152mm x (W)32mm x (H)10mm Print instructions Print in desired material, I…
Gridfinity hex bit organizer: 1x3 base 4 units tall 36 slots for ¼" (6.35mm) hex bits bits held at 45-degrees label area OpenSCAD .scad file included (outdated - will update) printed without supports part cooling is necessary for the…
*This does not extend the round count beyond 10.* Replaces factory magazine base plate for Ruger Mark IV 22/45 models This will work in Mark III 22/45 models as well Printed flat on bed, no supports Machine: Ender 3 V2 Layer height: .2mm…
An X axis mount for the ADXL345 inspired by @FLYNINDUSTRIES's bed clamp mount . This mount was designed for the Neptune 4 Pro but may work on other models leveraging the metal guide rails. Please note that someone has explicitly tried…
With the original 90° corners 3 networkcables were a little too tight for my taste, so i made a 45° variant.
Hi! These are 4 and 5 unit angled (45 degree) tool holders for shallow drawers. Note that large objects such as the Westcott scissors in the photo will overhang over adjacent Gridfinity squares. Features: 45-degree display angle 4-unit…
I made a remix of this grease injector and cap , so it can be printed faster . It's specific for the Super Lube 21030 (3oz) tube. So now the cap and the injector are shorter, so you save time and material. You have 3 profiles: 1 injector…
This is the Skull Arena set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
Artsy Apple Watch Series 7 45mm case
Angle Bracket 30°- 45°- 90° - M6 - 1/4x20mm Slots The Bracket is a rigid angled mounting plate, available in 30°, 45° and 90° configurations. It features slotted faces for adjustable positioning and is compatible with both 1/4-20…
Wasn't particularly thrilled with most of the LED diffuser channel corners out there, so decided to create my own. These were designed to be as close to an exact fit as the end-caps that come with the channel, and as minimalistic as…
2 sizes: 51mm inner 58mm inner + full 45° cut
Asrock B450 Pro4 IO/shield. Category: Electronics
Stützstrukturblocker sind zwingend erforderlich (siehe Bild). Mit der Nase nach unten drucken funktioniert wunderbar. Support blockers are absolutely essential (see picture). Printing with the nose down works wonderfully.
IO Shield for the Asus TUF Gaming B450M Plus motherboard, modelled in openscad.
This is a simple remix of a remix - because I love heatset inserts. Credit to Anatoly Kharkov for the ingenious dual purpose clip/mount design: Fits both the X and Y axes for the Ender-3 V3 SE The clip is a nice secure fit on the bed Easy…
Wall mount support for aqara FP2 with 45° angle. Follow me if you like this
Replacement clip to hold your parcel shelf strings up
Summary Edit: I uploaded the repaired version, which is exported from Prusaslicer after running the auto-repair function. Please download that to avoid possibly broken model. Sorry if this caused you any trouble! Tips: See the comment…
If you want spikes in your wrists this case is for you =)
IO Shield that fits an MSI B450M PRO-M2 MAX
I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…
This is a mod of the original made with the intent to be mounted at an angle insead of flat, specifically the corners have been modified aswell as me including some angles on the bar to allow them to light up easier during assembly!
Really quick simple design for mounting the ADXL345 Accelerometer to my Eryone Thinker Series printer for tuning with Klipper. Require 2 x M3 6mm, 2 x M3 8mm (for bed mount) & 2 x M3 16mm or equivalent for head mount. Print Settings…
There are a few great fusion 360 parametric box generators out there. However On-Shape didn't seem to have one so when I needed a box for some loose ammo I designed one. All screws are 3mmx30mm screws. One side should be loose one side…
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
Benefits of this design: 1. ADXL components protected from shorting against mounting bolts' heads & nuts. 2. ADXL components protected by walls from shorting against filament knob. 3. ADXL securely sandwiched in place giving it a very…
I developed an older workstation board angled at 45 degrees for better visibility, including a slot to hold the AAA battery housing pack behind the Micro:Bit. I printed in PETG with 25% Honeycombed infill setting.
Ein einfacher Powerbutton für Garmin Oregon 450. Er muss mit TPU oder Flex Material gedruckt und dannach eingeklebt werden. A simple power button for Garmin Oregon 450. It has to be printed with TPU or Flex material and then glued in…
Seemed mad to be using a protractor to align my triple monitors with a 3D printer available! Created a simple template to help align the three monitors on my sim racing rig to 45 degrees or 60 degrees. Should work with any size of monitor…
A practical bed clamp mount for the Philips Avent SCD845/26 baby monitor – perfect for securely attaching the monitor to the edge of a crib or bed frame. Designed for convenience and better placement of your baby monitor during naps or…
.45 ACP reloading tray. Print however you like. Holds qty 50
This is specifically for the 22/45 Tactical with/without a red dot; I do not know if it will fit a standard Mk IV. My print settings: Filament : PLA+ Nozzle : 0.6mm Layer Height : 0.3 Line Width : 0.6mm Walls : 4 Top/Bottom : 4 Supports :…
this is a 3D-printed canopy remix of the Bell Ranger 206, designed to fit the Tarot 450 pro helicopter Based on the original Bell Ranger 206 by Heli Printed. Full credit to Heli Printed for the base model. Print info: STL files included…
Simple little lightbars to house a 10x200mm LED strip. Perfect for enclosures. I was unhappy with the original lighting in my Ikea Lack Enclosure because it was misplaced and left the hot-end in shadow. These simple little lights fix the…
I designed this 45 Record Adapter in Fusion 360 for the Printables 45 Record Adapters contest (10/03/2023). It is a remix of the wonderful mini mountain models designed by Simon.…
Wasn't particularly thrilled with most of the LED diffuser channel corners out there, so decided to create my own. These were designed to be as close to an exact fit as the end-caps that come with the channel, and as minimalistic as…
i designed my own tolerance test since all the models that i found use either too much material or time. “push in” tests can't fuse so they aren't realistic enough for print in place models. since the model is relatively tiny, i had to…
UMP45 from CSGO. Altered and resized for fitting Dummy13. Can also fit Mini, Lucky and Easy13.
Suggested in Petg 5 Walls 30% infill Print muzzle end down
I finally picked up some security cameras, and it seemed that with most of the ideal locations to mount them, and the areas I wanted to view necessitated that the camera be able to angle more than the supplied mount allowed. I could have…
Picatinny/1913 rail sidesaddle holder for 5x .45LC or .410 Shotshells. Designed for the Rossi Brawler, but should work with any rail-equipped firearm in .410 or .45LC. Print 1x of this model, and 1x “smallside” from the original. 1x M3…
Check out my new Bed Levels ! This is a test print I made to help level my bed while it's printing. It is currently made to fit a 225mm x 145mm bed, which would cover the MakerBot Replicator Dual, FlashForge Creator Pro, PowerSpec Pro 3D,…
This remix has two different parts. The first is a replacement for the “ mount-arm.stl ” which increases the rearward tilt by 25° to allow for easier touch screen inputs on a desk. The second model is a short 45° mount that allows for…
It's a very tight fit, and the SAS card is slightly unaligned but it fits, and it works \_(ツ)_/
This is a remix of the original battery storage crate design inspired by Marzochi’s beer crate style and the great stacking features from TontoTraveller. In the original set, each battery type had its own separate full-size crate. For…
Opted not to do with the shelled design as it actually took up more filament and time to print than doing standard infill Included the f3d file incase you have fusion and want to change the angle (Sketch labeled "Sketch 2) has the angle…
You can put the triangle model next to the problem and rotate it in any way to fit the problem, thanks to this you can understand which side and how you can count. Print Settings Resolution: 0.2mm Infill: 0% Filament: PLA/PLA+/PET-G/ -…
This model is compatible with the lego system.
A simple pole stopper for the parcel shelf poles of the Smart Cabrio (450). Might work with other models.
I used this to align the SV06. Traditional squares will slightly deform the bed (since it will weigh down the bed surface) when trying to level relative to the linear rods. To do this, offset the bed from the bed surface, and shift the…
Diese Leuchte im Maßstab 1:45 (Spur 0) passt gut auf jede Strasse und natürlich auch auf den Bahnsteig. Konstruiert wurde sie mit Blender. Mit einem 3D-Drucker können die STL-Dateien zu Hause einfach ausgedruckt werden. Mast und Ausleger…
45 Record Adapter with the insignia for the Galactic Empire.
Update: I eventually ended up buying an aftermarket spare for better durability. Spool cover for Einhell GC-ET 4530. Recommended to print with 100% infill due to high centrifugal forces. Printed with support under the latch overhangs.…
the fallout 3 power armor as a ragdoll. print with supports. Pls like and post make!!! Good luck
Repaired version of RJ45 Ethernet Plug Protector
Button cell CR2450 battery holder for Gridfinity refined. Sadly since CR2450 cells are too high, you can't stack another bin on top. See https://www.printables.com/de/model/786463-gridfinity-refined-coin-cell-battery-holders for the remix…
I've tried many printed end effectors for my heavily modified Anycubic Kossel Linear Plus, but none really worked for me, so I decided to make my own. This model lets you use the rigid mount of your Phaetus Dragonfly BMO (just unscrew the…
clean and fast design to cover the rails of your cockpit
When assembling a large quantity of LACK tables from IKEA, screwing in the feet will become really hard on your hand. Therefore you can use this handy wrech to help you install the feet. This wrench has an inner diameter of 51x51mm which…
make a 30s1p pack for your vesc build
I used a support tree underneath. Changed the filament colour once the top layers started printing.
S$W 45 Shield Mag Loader.
Introduction The right angled ruler allows for not only straight and 90° lines, but it also comes with a 45° slope, making it a versitile tool with many applications. With the availability of two different ruler lengths (10cm and 15cm),…
This is a kill switch "paddle" for the DW-745. I have the model without this "paddle" and it can be a bit iffy turning the saw off. This solution is designed so that it doesn't require any modifications to the saw. And it's very easy to…
I designed this model to be used at the back of my 10 inch mini rack. To unplug the rack for transport I just unplug the ethernet cable from the ethernet coupler mounted in the rear of the rack. You could use it in other ways as well. I…
Hello Music and Vinyl-Fans. This is a 45rpm Vinyl Adapter which will fill your room with even more balance vibes. Size: 1.5 inches around with a 0.25 inch centerhole
