Ender 3 (V2&PRO) ADXL345 Bed Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ADXL345 mount for bed-slingers printers in order to measuring resonances. Useful for input shaper on Klipper.
- Rating
- 4.951 / 5
- Likes
- 447
- Downloads
- 3,543
- Makes
- 45
- Views
- 20,003
- Reviews
- 41
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I made a remix of this. I add the bottom protection in order prevent the screw to damage the PCB on the back of the bed and made some wall thicker to reduce the flex.
Print the 2 parts and assembly using an M3 nut and max 10mm screw to clamp it to a bed + two M3x8 screws to fix the ADXL354 to the printed part. I recommend 100% infill for the small part (adxl-protection-bed) and for the bigger one, your usual settings, but more perimeters will make it stiffer.
If you have a thicker or thinner bed you could scale the big part in slicer on only one axe.
