1 / 3
Filament Cutter 45° for Flashforge Adventurer 5M (AD5M) Printhead
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The cutter model is put directly on the filament slot on the printhead.
- Rating
- 5 / 5
- Likes
- 479
- Downloads
- 2,731
- Makes
- 5
- Views
- 19,676
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The rest of the files can be found → HERE ←, as well as a description of the necessary parts.
The model is put directly on the filament slot on the printhead. Therefore, to change the filament, you will no longer need to remove the tube and cut the filament manually. This is very useful if you are going to print in several colors for a short time.
Please note that this model may make it difficult to install the cable circuit (I have not checked, I am not sure), and you will also need to shorten the PTFE tube a little.
<3