P
PrintablesKeepy
Mikrotik hAP lite TC wall mount
A simple wall mount for mikrotik hAP lites.
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
- Downloads
- 364
- Likes
- 27
- Rating
- 5
Search results: mikrotik
Counting matching models…
P
Printablesmatbcvo
MikroTik RB5009 mounting bracket
MikroTik RB5009 mounting bracket, can be installed either way (0 or 180 degrees) 4 x M4 nut and screw (length 40 mm) Recommended to sand with P120 sandpaper and then glue with epoxy glue
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
- Downloads
- 53
- Likes
- 1
- Rating
- 0
P
PrintablesPotted Pork
Mikrotik hEX S router DIN rail mount
DIN 35 rail mount for a Mikrotik hEX S router Mounts on edge with ports facing forward. Integral clip to snap onto a DIN 35 rail. Router snaps into bracket without requiring fasteners. Design: Clip design based on…
- Downloads
- 618
- Likes
- 51
- Rating
- 5
P
PrintablesCaptainAl
Mikrotik RB5009UG - 10 inch or 19inch rackmount kit
an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.
- Downloads
- 571
- Likes
- 30
- Rating
- 2.75
P
Printablesmseidler
Mikrotik RB5009 10 Inch Rack Mount
Rack mount bracket for the Mikrotik RB5009 which can be used to mount the router to a 10 inch rack with 0.5 height units. M4 screws are needed to mount the brackets to the router. Remixed an existing model and changed the horizontal…
- Downloads
- 501
- Likes
- 47
- Rating
- 4.5
P
PrintablesKarolTheGuy
Mikrotik CCR Rackmount Ears and Screws - EARS/K-10
Mikrotik router/switch ears for rackmount since they are so difficult to buy. Fits my CSS326-24G-2S+RM no issue and should fit other router/switches from Mikrotik The distance between the holes is 25mm.
- Downloads
- 496
- Likes
- 33
- Rating
- 5
P
PrintablesKeepy
MikroTik Hex and Haplite Rack Mount Holder
Introducing the MikroTik Hex and Haplite Rack Mount Holder, the perfect solution for seamlessly organizing and safeguarding your valuable network devices. Designed to securely hold your MikroTik Hex and Haplite routers, this rack mount…
- Downloads
- 448
- Likes
- 29
- Rating
- 4.25
P
PrintablesDebolestis
MikroTik RB260 19 inch rack mount
This is 19 inch rack mount for MikrotTIk router RB260GSP . There are 8 parts that need to be printed. Parts named 19-plug and 19-switch clip are not necessary. If printed part named 19-plug must be printed twice. I printed parts in PETG,…
- Downloads
- 417
- Likes
- 69
- Rating
- 0
P
Printablesbjornlljohansen
Mikrotik hEX/hAP rackmount
Simple rackmount bracket for Mikrotik hAP, hEX and devices with the same formfactor(slightly smaller than hAP ac). Optional locking bracket also provided. Successfully printed on a Prusa MK3S using - Prusament PLA recycled - 0.30mm Layer…
- Downloads
- 413
- Likes
- 37
- Rating
- 5
P
PrintablesKeepy
Mikrotik RB260GS Rack Mount
Printer: Creality Ender 3 V2 NEO Filament: eSun PLA+ Orange Tailored for home and small office environments, this design incorporates additional options for mounting Mikrotik desktop devices on your network rack. If you have a design in…
- Downloads
- 412
- Likes
- 57
- Rating
- 5
P
Printablesvodoc
Mikrotik RB5009 rack cover
Use this model if you do not want to see the hole in the rack when you mount single RB5009 router. This model can be printed on a print bed with the dimensions of 220mm x 220mm. Just rotate it on 45 degrees in your slicer before print.
- Downloads
- 370
- Likes
- 38
- Rating
- 5
P
PrintablesVafi
Mikrotik hap ac3 DIN mount
Mount for MK hap ac3 on DIN rail. Holes for M4 screws. You can use DIN mount https:https://www.prusaprinters.org/cs/prints/19385-din-rail-mounts or https://www.prusaprinters.org/cs/prints/152136-din-rail-mount
- Downloads
- 296
- Likes
- 40
- Rating
- 4.5
P
PrintablesKeepy
Mikrotik Haplite TC case
A case form factor with dimensions similar to Mikrotik Hex for Haplite TC. Printed with Creality Ender 2 Pro using Kingroon Red PLA.
- Downloads
- 286
- Likes
- 23
- Rating
- 0
P
PrintablesDustin
MikroTik hEX S 10 inch rack mount
This is a 10 inch rack mount for the Mikrotik hEX S router, also fits the regular hEX (thanks therealodie for testing) might fit for others as well but thats untested. You'll need 4 M3x8 screws and 4 M3 nuts. Print Settings Supports: No…
- Downloads
- 284
- Likes
- 23
- Rating
- 5
P
PrintablesAxelCo
Raiser / stand for MikroTik RB5009UG+S+IN / RB5009UPr+S+IN POE IN/OUT router
Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router. With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to…
- Downloads
- 281
- Likes
- 33
- Rating
- 0
P
PrintablesEHY_3dp
Mikrotik L009/RB5009 10-inch rackmount
Requirements M4 x 10 screw * 4 M4 threaded insert * 4 You might need a long and thin screw driver for fastening device onto upper mounting hole.
- Downloads
- 280
- Likes
- 28
- Rating
- 4.8
P
PrintablesZdenek Zenkl
Mikrotik hAP ac2 10" Rackmount
Simple rackmount bracket for Mikrotik hAP ac2 Material: ABS Layer Height: 0.20 mm Nozzle: 0.4 mm
- Downloads
- 253
- Likes
- 18
- Rating
- 5
P
Printablestm
mikroTik hEX PoE wall holder
Simple wall holder for Mikrotik - eg. RB960PGS
- Downloads
- 241
- Likes
- 13
- Rating
- 5
P
PrintablesFilip Flajsinger
Mikrotik hAP ac2 stand
Vertical stand for Mikrotik roater board
- Downloads
- 231
- Likes
- 9
- Rating
- 5
P
PrintablesRafael
Mikrotik RMB33G Case
A modern enclosure for this fantastic Mikrotik device with the following features: Very tight geometry. Follows Mikrotik Branding Guidelines. Air ventilation placed where heat is mostly generated. Textured enclosure for less 3d…
- Downloads
- 230
- Likes
- 11
- Rating
- 0
P
PrintablesWalter Layher
Modular 10 Inch Server Rack - Mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+
These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…
- Downloads
- 228
- Likes
- 25
- Rating
- 0
P
PrintablesJan Obrusnik
Mikrotik hAP AC2 19" rack mount
Simple one-sided rack mount for Mikrotik hAP ac2.
- Downloads
- 223
- Likes
- 27
- Rating
- 5
P
PrintablesMartin Emanuel Ludík
MIKROTIK 2011 / 4011 - series - holder RACK 19''
MIKROTIK 2011 / 4011 - series - holder RACK 19''
- Downloads
- 214
- Likes
- 24
- Rating
- 5
P
Printables4ib3r
Mikrotik hEX rack mount
Simple mount for small mikrotik router
- Downloads
- 205
- Likes
- 23
- Rating
- 5
P
PrintablesZkaza
Mikrotik Routerboard - Rack 19 Holder
Mikrotik Routerboard - Rack 19 Holder - No Supports needed
- Downloads
- 193
- Likes
- 34
- Rating
- 5
P
PrintablesMaurício Pessoa
MikroTik CRS305-1G-4S+IN 10-inch Rack Mount
A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…
- Downloads
- 182
- Likes
- 20
- Rating
- 0
P
PrintablesRobchiks
Mikrotik hEX, RD2x0GS 10inch rack mount
Mikrotik hEX, RD2x0GS 10inch rack mount
- Downloads
- 178
- Likes
- 18
- Rating
- 4.5
P
PrintablesMaurício Pessoa
MikroTik CRS305-1G-4S+IN 19-inch Modular Rack Mount
A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…
- Downloads
- 171
- Likes
- 12
- Rating
- 0
P
PrintablesWolfgang Nagele
Rack Mount for Mikrotik hEX S (RB760iGS)
Needs a bit of work to open the wall wart PSU and solder on the C14 connector. Only attempt if you are qualified to perform such work - mains voltage can be dangerous! OpenSCAD model is included - adjust if your IEC connector, etc. is…
- Downloads
- 167
- Likes
- 12
- Rating
- 0
P
Printablesopentux
NETGEAR or MikroTik DIN HOLDER
Dear makers, we would like to share our DIN holder for switch NETGEAR or MikroTik Routers.GS308E. Consist of left and right holder. Overall depth ater installation is 81mm from DIN rail. Compatibility: NETGEAR (26 mm thickness): GS308E…
- Downloads
- 165
- Likes
- 22
- Rating
- 5
P
PrintablesInfrageeks
3D Print version of the Mikrotik K-79 rackmount kit
A reproduction of the Mikrotik K-79 for two switches. It requires heat set nuts for M3 bolts. It's a tight fit so you need to use the thinnest possible nuts. You can just take the single model and mirror it on the X-Axis or there's a .3MF…
- Downloads
- 164
- Likes
- 9
- Rating
- 0
P
PrintablesSebastian
MikroTik CRS305 80mm snap-on fan mount
Snaps onto the switch and locks into side vent holes with small pegs. Designed with 80mm fan and M3 brass inserts in mind. Supplied F3D file can be used to edit the fan size and brass insert holes. Best to be printed with fan side on the…
- Downloads
- 157
- Likes
- 27
- Rating
- 5
P
PrintablesWalter Layher
Modular 10 Inch Server Rack - Mounts for MikroTik hAP ax³ and CRS310-1G-5S-4S+
I created mounts for Natalie T 's Modular 10 Inch Server Rack to mount MikroTik hAP ax³ and CRS310-1G-5S-4S+. The Mikrotik hAP ax³ uses a transparent base for the body of the access point that allows the device to be mounted horizontally…
- Downloads
- 153
- Likes
- 13
- Rating
- 5
P
PrintablesDebolestis
Dual MikroTik RB260 19 inch rack monut
Dual MikroTik RB260 19 inch rack mount with holder for two PSU-s. Plug is not necessary, but if it is used, it must be printed in four copies. It is similar to THIS model. No supports are needed. To assemble everything 12 cap head screws…
- Downloads
- 153
- Likes
- 6
- Rating
- 0
P
Printablescopycat
Mikrotik hAP Lite box + rack mount
This alternative box is smaller, can lay flat, includes holes for wall mounting, includes rack holder. Printing doesn't require supports. Use a piece of tape on the board not to scratch it while wall mounting. Use hot glue and a piece of…
- Downloads
- 144
- Likes
- 8
- Rating
- 0
P
PrintablesMisioKoala
Mikrotik RB5009 rack cover with power cable cutout
As it said in original model - can be printed on printer with 220mm x 220mm bed if you'll rotate object on 45°
- Downloads
- 140
- Likes
- 12
- Rating
- 5
P
PrintablesSAW1L
10 Inch rack Mikrotik rb750gr3
I started working with 3D for a litle time, I did not find any Mikrotik rb750gr3 for 10 inch rack, so I made my own.
- Downloads
- 139
- Likes
- 12
- Rating
- 0
P
PrintablesCraftComputing
Mikrotik Under Desk Mount
Made for the CRS310-8G+2S+IN, but compatible with any MikroTik switches that use 25x25mm rack ear mounts. Mounts to the MikroTik switch with 2x M3x8mm screws (countersunk) 5mm hole for using #8 Lath Screws to mount under your desk, or on…
- Downloads
- 135
- Likes
- 19
- Rating
- 0
P
PrintablesScrath
19" Rackmount bracket for MikroTik hAP ax2
This is a bracket for mounting a MikroTik hAP ax2 router inside a 19" rack. It utilizes the stand included with the router for providing solid mounting by screwing it to the bracket. Note: This is a router. Putting it in an enclosed metal…
- Downloads
- 133
- Likes
- 11
- Rating
- 0
P
Printablespunxhonor
MikroTik hex S RB760iGS 10 In Rack Shelf
I slapped these two models together to make a sturdy and centered 10 inch rack mount shelf for a MikroTik HEX S RB760iGS, but it might work with other models from this brand using the same sized housing. Careful with tolerances, I…
- Downloads
- 130
- Likes
- 10
- Rating
- 0
P
PrintablesT-omi
Mikrotik RB750 Gr3 HEX RACK MOUNT
Hello, this is my simple Rack Mount for Mikrotik RB750 Gr3 HEX. I designed this mount to use 1U space ( little bit less to allow some play) Mount is made very thick and sturdy to allow pluging and unpluging of cables without holding…
- Downloads
- 128
- Likes
- 6
- Rating
- 0
P
Printablesklayf
MikroTik 10-Inch Mini Rack Ears (RMK-2/10 Alternative)
Mikrotik 10-inch rack ear for CRS310-8G+2S+IN and other 200mm units Includes two types of brackets: DeskPi RackMate (M5) 10" standard mini rack (M5/M6 and detachable Nut) Notice: This model was originally designed for CRS310-8G+2S+IN, it…
- Downloads
- 124
- Likes
- 19
- Rating
- 5
P
PrintablesRoss
MikroTik CRS305-1G-4S+IN Mount
Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…
- Downloads
- 124
- Likes
- 4
- Rating
- 5
P
PrintablesDominik
MikroTik routerboard L23UGSR-5HaxD2HaxD box
A box I designed for L23UGSR-5HaxD2HaxD Routerboard. Has 1 open side for air ventilation. Uses M3 bolt to hold the board (M3x6-M3x14) will work. Has mounting points on the backside, which use M4 screws with max ~7mm diameter of the head.…
- Downloads
- 123
- Likes
- 9
- Rating
- 5
P
Printablesjsolon
10" inch rack mount ear bracket for Mikrotik CRS310 series switch
The switch itself is 1U-sized and even comes with hardware mounts for a 19" rack installation, but the 10" rack mount accessory is extra. With this mount you can utilise one of the included rack mount ear brackets to mount the switch to a…
- Downloads
- 122
- Likes
- 11
- Rating
- 3.5
P
PrintablesKeepy
Mikrotik HEX RB750Gr3 Vertical Mount
Printed using eSUN PLA+ Black
- Downloads
- 114
- Likes
- 9
- Rating
- 0
P
PrintablesKeepy
Mikrotik RMK-2/10 Compatible
Mikrotik RMK-2/10 compatible. It allows Mikrotik 10 inch rack router and switches to be mounted side by side in a 19 inch rack.
- Downloads
- 111
- Likes
- 10
- Rating
- 5
P
PrintablesDavid
Soporte para mikrotik CRS125-24G-1S-2HND - RACK 19"
Soporte para ROUTER MIKROTIK CRS125-24G-1S-2HND, para montar en rack de 19"
- Downloads
- 109
- Likes
- 4
- Rating
- 0
P
PrintablesMB
Mikrotik wAP ac wall mounting bracket
These brackets are easily lost but when you decide to attach wAP ac to the wall you will need one, so I designed one :) It is a nice fit and easy and fast to print, no support needed. I used 3 (0.4mm) perimeters and 1mm top and bottom…
- Downloads
- 107
- Likes
- 9
- Rating
- 0
P
PrintablesEvandro Assis
Mikrotik Cloud Router Switch Crs309 mount
It is designed in 2 different parts, left and right which are screwed onto the switch.
- Downloads
- 104
- Likes
- 12
- Rating
- 0
P
PrintablesM4dMike
DIN-Rail Mount for Mikrotik CRS326 (v2)
This DIN-RAIL Adapter let's you mount a Mikrotik CRS326 (24-Port Desktop PoE-Switch) on a DIN-Rail. History This is Version #2 (2024-02-15) of mounting a Mikrotik CRS326 on a DIN-Rail. v1 worked, but was hard to get on the rail as the…
- Downloads
- 104
- Likes
- 14
- Rating
- 0
P
PrintablesHannah
DIN Rail Mount for Mikrotik hEX lite
Remix of Potted Pork's holder to hold the router horizontal (90 degrees from the original). Designed to mate with https://www.printables.com/model/152136-din-rail-mount using an M4 bolt and nut. Prints without supports. Quite a tight fit…
- Downloads
- 100
- Likes
- 8
- Rating
- 3
P
PrintablesRazvan Constantin
Mikrotik CAP AX mounting bracket
Lost the mounting bracket when I had to renovate so I created a new one. This model does not require supports and can be printed flat, with the text facing upwards. Might be compatible with CAP AC XL also, but I am unable to test.
- Downloads
- 97
- Likes
- 8
- Rating
- 0
P
PrintablesSebastian
Modular Rack Mount Mikrotik CRS305 shelf
A shelf for mounting MikroTik CRS305 in modular rack. Can be mixed and matched with: blank panels: https://www.printables.com/model/898351-rack-mount-empty-panels-small-printer-friendly patch panels:…
- Downloads
- 97
- Likes
- 8
- Rating
- 0
P
Printablesmilangr
Mikrotik router DIN mount
Vertical case for Mikrotik router . DIN rail mount
- Downloads
- 96
- Likes
- 7
- Rating
- 5
P
PrintablesTRIMAGIA
Mikrotik RB750Gr3 plus raspberry pi 4/5 10-inch rack mount
1U 10-inch rack mount for a MikroTik RouterBoard RB750Gr3 (installed without its case) and one Raspberry Pi 4 or 5. Requires M3 nuts and bolts for mounting the MikroTik RouterBoard. Requires M2.5 bolts for mounting the Raspberry Pi.…
- Downloads
- 95
- Likes
- 13
- Rating
- 0
P
PrintablesIT Wiky
Mikrotik RB750 holder for 19 inch Rack
Side buttons are accessible. You can print this on 400x400 bed diagonally. I did not want to have it in separate parts. I will do that in a future and attach it to this project.
- Downloads
- 94
- Likes
- 2
- Rating
- 0
P
PrintablesJasir
Držák Mikrotik cAP ac
Držák pro Mikrotik cAP ac. Montáž na zeď nebo strop za použití originálního plechu pro přichycení.
- Downloads
- 94
- Likes
- 12
- Rating
- 5
P
PrintablesTouki_JAFF
Mikrotik hEX/hAP series - 19" Rack 1U Mount
Self-locking Rack Bracket for Mikrotik hEX/hAP series. screws for mounting : per Case : 2 screws M2x12 (max) per Link : 4 screws M4x16 (max)
- Downloads
- 91
- Likes
- 6
- Rating
- 0
P
PrintablesRobert Sedláček
Mikrotik hAP ac3 / hAP ax3 holder RACK 10"
10inch rack holder for Mikrotik. With this it can be mounted only from behind, because hAP ac3 (ax3) is too wide to stitch it between rails. Printed from PETG, holes are 5.8mm, so M6 screws can be directly used. Use organic support for…
- Downloads
- 91
- Likes
- 9
- Rating
- 0
P
PrintablesApollo917
MikroTik hEX S 1U 10-inch Rack Mount
A compact 1U rack mount designed to fit the MikroTik hEX S (RB760iGS) into standard 10-inch mini racks Features: Integrated Power Cable Channel: Features a built-in routing canal and cable fixator to keep your power line secured All model…
- Downloads
- 88
- Likes
- 12
- Rating
- 5
P
Printablestm
mikroTik power adapter wall holder
A simple wall holder/mount for mikroTik power adapter
- Downloads
- 88
- Likes
- 13
- Rating
- 5
P
PrintablesDigital Farmer
Mikrotik RB2011 DIN rail holder
Simple DIN rail holder for router Mikrotik RB2011 nad similar (with similar mounting)
- Downloads
- 88
- Likes
- 22
- Rating
- 5
P
Printablesjozo.hovan
Mikrotik hap ac3 wall mount - remix
This is a remix of the original model by @Vafi . I have made several structural adjustments to improve the overall functionality and fit. Key Changes: Scale: Increased to 101% for better fitment/tolerances. Height Adjustment: Reduced the…
- Downloads
- 87
- Likes
- 6
- Rating
- 0
P
PrintablesTooth3D
Mikrotik CA150 case
Fits RB450, RB450G and RB850Gx2 routerboards. I used the sizes from the official documentation and remade for printing with plastic. Official documentation: https://routerboard.com/CA150 http://i.mt.lv/routerboard/files/RB450case.rar…
- Downloads
- 87
- Likes
- 5
- Rating
- 0
P
Printablesrobo-w
MikroTik QM-X Style SXTsq Holder
Print needs support on the “steps” which go to the mast-side when mounting. The curved inner part benefits from support, but also works without support. Print settings: ABS 0.2mm resolution 6 wall loops 25% infill selective support on…
- Downloads
- 86
- Likes
- 8
- Rating
- 4.5
P
PrintablesSebastian
MikroTik CRS305 modular rack shelf
A shelf for mounting MikroTik CRS305 in modular rack ( https://www.printables.com/model/79585-low-profile-modular-1u-relay-rack-mount-for-16-key ). Provided stl is suitable for mounting on the left side, but can be flipped for right side…
- Downloads
- 86
- Likes
- 6
- Rating
- 0
P
PrintablesRafael
Mikrotik RB450Gx4 Case
A modern enclosure for this fantastic Mikrotik device with the following features: Very tight geometry. Follows Mikrotik Branding Guidelines. Air ventilation placed where heat is mostly generated. Textured enclosure for less 3d…
- Downloads
- 83
- Likes
- 6
- Rating
- 0
P
PrintablesNexox Enigma
120mm Fan Duct for Mikrotik CRS305 10G Switch
This is a fan duct to fit a 120mm fan to the underside of a Mikrotik CRS305 10G switch, for extra, quiet cooling of the processor and SFP modules. It attaches to the switch by sliding a pair of lugs into the switch's wall mount screw…
- Downloads
- 82
- Likes
- 6
- Rating
- 5
P
PrintablesTony Stark
Case for MikroTik hAP ac^2
Корпрус MikroTik hAP ac^2 для лучшей вентеляции.
- Downloads
- 81
- Likes
- 9
- Rating
- 5
P
Printablesjeroenrnl
Mikrotik CRS125-24G-1S-2HnD Rackmount
This is a remix from David's version that removes the letters, slightly speeds up printing and removes the need for supports. I tapped the holes in the side of the front to M3 and used short M3 bolts to screw the rachmounts to the switch.
- Downloads
- 80
- Likes
- 7
- Rating
- 0
P
Printablesjoey
Mikrotik Rack Ear
This was designed for a Mikrotik CRS326-24G-2S+RM but Im pretty sure all of the 1U Mikrotik devices use the same pattern
- Downloads
- 79
- Likes
- 8
- Rating
- 0
P
Printablesbosr
Mikrotik CRS309 Fan cover
I designed this Cover and Fan support for cooling the SFP+ RJ45 modules in my Mikrotik CRS309 (fantastic router/switch). With this, my modules seem to be running very cool: in fact when touching them I feel they are not even slightly…
- Downloads
- 79
- Likes
- 7
- Rating
- 0
P
PrintablesVafi
Mikrotik Routerboard MikroTik SXTsq 5 mounting
Mounting for old adjustable antenna holder
- Downloads
- 77
- Likes
- 9
- Rating
- 0
P
Printablesmattie
Mikrotik wAP Wall mount
Remixed from the original author, filled-in the large gap so that I have enough surface area to stick it to the wall instead of screwing it to the wall. Left the mounting holes intact in case I never want to screw it in the future.…
- Downloads
- 76
- Likes
- 9
- Rating
- 0
P
Printablesmaxcou
10'' Rack Mount for the Mikrotik hAP ac lite
This is a specialized 10-inch rack mount solution designed to securely house the compact MikroTik hAP ac lite, wireless router. Given the hAP ac lite's small form factor, a dedicated 10-inch rack mount is ideal for integrating it neatly…
- Downloads
- 72
- Likes
- 7
- Rating
- 0
P
Printablessharpstuffau
Mikrotik hAP ac2 10" Rackmount with 4x keystone
just added 4x keystone mounts
- Downloads
- 71
- Likes
- 6
- Rating
- 0
P
PrintablesPajaa
MikroTik SXTsq Lite5 antenna holder
Simple holder for MikroTik SXTsq Lite5 antenna. No adjustment (it can be done by redesigning the fix part). My printing setup: Material: Prusament PETG Nozzle diameter: 0.4 mm Layer height: 0.25 mm QUALITY Infill density: 30% (Gyroid)…
- Downloads
- 68
- Likes
- 7
- Rating
- 3.67
P
Printablesmoreentropy
Tripod mount for Mikrotik wAP devices
This print was designed to embed one ¼" Ruthex threaded insert and two M3 Ruthex threaded inserts.
- Downloads
- 68
- Likes
- 9
- Rating
- 0
P
Printablesmaxcou
MikroTik hEX / hEX S 1U Rack Mount (10-inch)
MikroTik hEX / hEX S 1U Rack Mount (10-inch) This is a 1U 10-inch rack mount designed specifically for the MikroTik hEX S (RB760iGS) and other MikroTik routers sharing the exact same standard compact desktop form factor. This design is a…
- Downloads
- 68
- Likes
- 8
- Rating
- 0
P
PrintablesM4dMike
DIN-Rail Mount for Mikrotik CRS326 (v1)
CAUTION: This version (v1) is deprecated: v2 is available here: https://www.printables.com/model/765733 I needed a DIN-Rail capable Network Switch, and because I really like Mikrotik and RouterOS, I just had to make my own design. I…
- Downloads
- 68
- Likes
- 12
- Rating
- 0
P
Printablesdskowronski
Primitive self-adhesive adapter for MikroTik hAP ax² (ax2) / ac² (ac2)
Some MikroTik Wi-Fi access points, most notably hAP ax² (ax2) and hAP ac² (ac2), use a distinct translucent base (" hAP case base "), which is used both as a stand and as a mounting plate for fixing to a wall or ceiling with screws.…
- Downloads
- 67
- Likes
- 7
- Rating
- 0
P
PrintablesSpirit_SP
Mikrotik hAP AC2 Vent case
Recommended material: ABS Print without supports Print models as they oriented Screws M1,7x10mm
- Downloads
- 67
- Likes
- 7
- Rating
- 0
P
Printableslotohov
MIKROTIK RB941 HAP LITE WALL MOUNT
MIKROTIK RB941 HAP LITE WALL MOUNT source included
- Downloads
- 66
- Likes
- 6
- Rating
- 0
P
PrintablesWide-R
Mikrotik hAP ax S 10″ inch rack mount
I designed this for my own network rack and decided to share it in case others in the community find it useful. The original print was done in PLA, however, I recommend using a material that is more resistant to long-term deformation…
- Downloads
- 65
- Likes
- 3
- Rating
- 0
P
PrintablesJirka
Mikrotik CAP AC Stand
Minimalistic stand for microtic CAP AC. Made from 2 pieces that are snap fit. The AP is than just inserted into the stand.
- Downloads
- 62
- Likes
- 8
- Rating
- 5
P
Printablesklayf
Desk Stand for MikroTik RB260GS
Desk stand for MikroTik RB260GS (Managed L2 Switch) This stand saves space and allows you to easily check the link LEDs. *I recommend printing with PETG-HF or PLA Basic. Tested on the following models: RB260GS (CSS106-5G-1S) RB260GSP…
- Downloads
- 59
- Likes
- 11
- Rating
- 0
P
Printablestm
mikroTik PoE adapter wall holder
Simple holder for mikroTik PoE adapter
- Downloads
- 58
- Likes
- 4
- Rating
- 0
P
Printableshaljimmy
Mikrotik Routerboard 260GSX wallmount
Mikrotik Routerboard 260GSX wallmount This is based on tedder's Mikrotik RouterBoard Wall Mount for RB260GSP from Thingiverse Thicker base
- Downloads
- 58
- Likes
- 5
- Rating
- 0
P
PrintablesStanley
MikroTik RB5009 Rackmount Bracket with Raspberry Pi 3/4/5
This is a rackmount for the MikroTik RB5009 , with additional space for a Raspberry Pi 3 , Raspberry Pi 4 or Raspberry Pi 5 . I use the Pi to run Pi-hole and UniFi Controller on my home network. Bill of Materials (BoM): 1 x Raspberry Pi…
- Downloads
- 57
- Likes
- 8
- Rating
- 0
P
PrintablesSebastian
MikroTik CRS305 80mm screw-in fan mount
Requires opening the switch and fastening screws through vent holes (non-destructive). Designed with 80mm fan and M3 brass inserts in mind. Supplied F3D file can be used to edit the fan size and brass insert holes. Compatible with modular…
- Downloads
- 57
- Likes
- 8
- Rating
- 0
P
PrintablesSkramstad
Mikrotik CRS310-8G+2S+IN Wall mount
A simple wall mount for your Mikrotik CRS310-8G+2S+IN. One for each side.
- Downloads
- 56
- Likes
- 4
- Rating
- 0
P
PrintablesPetrs22
Mikrotik cAP XL ac wall mount adapter
Distance frame for Mikrotik cAP XL ac, wall mount adapter 15% infill 2 wall lines PLA
- Downloads
- 56
- Likes
- 3
- Rating
- 0
P
PrintablesWalter Layher
Modular 10 Inch Server Rack - Mounts for MikroTik hAP ax³ and ZimaBoard
This is an evolution of my previous mod . I created a mount for a ZimaBoard with a dual-port NIC and two SSDs attached to install a firewall with PFsense or OPNsense. Because the network ports of the MikroTik HAP are on the back, it was…
- Downloads
- 55
- Likes
- 9
- Rating
- 5
P
PrintablesDK1MI
MikroTik hEX (S) 19 inch rack mount
Slightly edited rack plate version of the original rack mount by dsko. It's still very wobbly and only recommended if you don't plan to plug cables in and out on a daily basis. Category: Computer
- Downloads
- 55
- Likes
- 7
- Rating
- 0
P
PrintablesMorpheus61
Mikrotik RB4011 Ventilation Stand
My RB4011 is located in a closet and gets quite hot without ventilation. This helps to cool it down with a slow running 12cm fan standing besides. RB4011 fits perfect on it, but it can easily be resized in the slicer for other equipment.…
- Downloads
- 55
- Likes
- 4
- Rating
- 0
P
PrintablesThomas Schreiner
Mikrotik RB5009 rack cover with cable cutout
Mikrotik RB5009 rack cover with cable cutout.
- Downloads
- 52
- Likes
- 2
- Rating
- 0
P
Printableshafieror
Vývodka Mikrotik Cube 60Pro ac
Když máte techniky, kteří dokáží ztratit neztrtatitelné. Lze tisknout bez podpor. Vzhledem ke smrštitelnosti ASA materiálu (je UV odolný) je dobré tisknout na 101%, aby závity seděly správně na jednotce. Horní část spodníhu dílu je…
- Downloads
- 51
- Likes
- 6
- Rating
- 5