Mikrotik hAP ax S 10″ inch rack mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 1U 10 inch rack shelf with cutout and holepattern for a mikrotik hAP ax S router.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 68
- Makes
- 0
- Views
- 455
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this for my own network rack and decided to share it in case others in the community find it useful. The original print was done in PLA, however, I recommend using a material that is more resistant to long-term deformation under heat and load, such as ABS or ASA, to prevent warping over time.
The design prioritizes maximum airflow to help manage heat buildup. A slide-lock mechanism is integrated to keep the router securely in place when attaching network cables :)
There is 65 mm of free space next to the router to accommodate accessories. I’ve also considered future additions such as keystone jacks, a Raspberry Pi, or an M.2 enclosure or small SSD for added storage, conveniently located near the USB port. To make remixing easier, the original Fusion file is included.
Please note that you should verify the screw hole sizes against the screws you plan to use. Depending on tolerances, the holes may need slight adjustment or drilling.
Enjoy!