1 / 4
MikroTik hEX S 10 inch rack mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 10 inch rack mount for the Mikrotik hEX S router, also fits the regular hEX (thanks therealodie for testing)…
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 284
- Makes
- 1
- Views
- 4,387
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a 10 inch rack mount for the Mikrotik hEX S router, also fits the regular hEX (thanks therealodie for testing) might fit for others as well but thats untested.
You'll need 4 M3x8 screws and 4 M3 nuts.
Print Settings
Supports:
No
Resolution:
0.2
Infill:
15%
Filament:
PETG
Notes:
- print two pieces of rack-plate.stl
Insert hEX S
This can be a bit tricky.
- align the holding pins on the center part to the screw holes on the bottom of the hEX S and push them in (this is why you should use PETG as it bends better)
- while pushing, slide the hEX S to the front until the rubber feets lock into the holes. This is a little difficult because of the rubber feet.
the hEX S should now be securely locked on the mount
screw together
Use 4 M3x8 screws and M3 nuts to screw the rack plates to the center piece.