Mikrotik hEX S router DIN rail mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIN 35 rail mount for a Mikrotik hEX S router with integrated clip.
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 629
- Makes
- 4
- Views
- 4,969
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
DIN 35 rail mount for a Mikrotik hEX S router
Mounts on edge with ports facing forward. Integral clip to snap onto a DIN 35 rail. Router snaps into bracket without requiring fasteners.
Design:
Clip design based on https://www.thingiverse.com/thing:2876263
I completely recreated the design in fusion 360 and made the clip adjustable for multiple designs.
Materials:
This design is best printed in Nylon or ASA. I found ASA held up to stress the best in higher temperatures in a passively ventilated outdoor enclosure. A 0.6 nozzle is perfectly fine for printing this bracket.
Note that the tolerances are tight and you will likely need to scale in the X and Y dimensions to compensate for shrinkage when using Nylon or ASA. Expected between 1% and 2% shrinkage. No noticeable shrinking occurs on the Z axis.
Optional Hardware:
Although the router snaps into the bracket, there are holes on the back of the bracket that allow you to use fasteners to securely mount the router to the bracket.
Uses:
- qty 2 3mm x 05.mm x 8mm Metric machine screws, Phillips flat head
- qty 2 M3 hex nut