Drysuit plugs for leak detection
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€29.46 – €36.01 net (excluding VAT)
For file: Drysuit plugs_0.4n_0.2mm_PLA_MK4S_20h21m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €32.73 excluding VAT (range midpoint).
- Weight reported by the author
- 668 g
- Print time reported by the author
- 20.35 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Use these plugs to close off the neck and wrist seals of your drysuit when you need to hunt for a leak
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 151
- Makes
- 0
- Views
- 540
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
If you're a cold-water diver, you most likely have a drysuit. And if you have a drysuit, you most likely have experienced the joyous feeling of that cold trickle running down your arm, back, neck or leg.
The easiest way to detect a leak is by plugging the extremities and filling up the suit with air, and then using soap water to see where the bubbles form.
These prints will help you accomplish that!
If you have drygloves, you most likely don't need the wrist plugs.