Prusa mini enclosure plugs for the bottom panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Original Prusa MINI Enclosure 1.0 has two big holes in the bottom panel. I made these plugs to seal them.
- Rating
- 4.333 / 5
- Likes
- 48
- Downloads
- 221
- Makes
- 12
- Views
- 573
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Original Prusa MINI Enclosure 1.0 has two big holes in the bottom panel. I made these plugs to seal them in the hope to preserve a little more heat inside the enclosure.
You can find three different plugs here:
- covering the whole hole
- with cutout for power cable
- with cutout for power and network cables (see photo)
Printing:
The dimensions are chosen with the standard profile in mind:
- 0.4 mm nozzle,
- 0.2 layer height.
Print the plug with the flat head on the bed. No supports are necessary.
You can grab gcode directly if you prefer that.
I have tested the model in PETG and it works fine: it snaps well in place and the tabs do not break away.
PLA might work too because the tabs don't have to bend much. Let me know if you try :)
Remixing:
I'm uploading a STEP file if you want to remix. Just respect the license, please.