1 / 6
Dollhouse Double-Hung Window, 3' x 4', Scale 1:12, Movable Sashes — image 1
1 / 6

Dollhouse Double-Hung Window, 3' x 4', Scale 1:12, Movable Sashes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.27 – €0.33 net (excluding VAT)

For file: 2Lower Window R2.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.30 excluding VAT (range midpoint).

Weight reported by the author
6 g
Print time reported by the author
11.4 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

This double-hung window has flat springs on the sashes that keep them in place after being moved up or down.

Rating
0 / 5
Likes
82
Downloads
259
Makes
0
Views
769
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

You can print sashes that provide 1 over 1 or 4 over 1 dollhouse windows.  The flat springs on the sides of the sashes keep them in place after movement.  I successfully printed everything without support. 

Install each sash by placing one side in the frame slot and then flexing the other side of the frame outward, allowing the sash in the other side.

Let me know in the comments if you would like a similar window for 1:16-scale dollhouses.

 

Tags