1 / 6
Dollhouse Double-Hung Window, 3' x 4', Scale 1:12, Movable Sashes — zdjęcie 1
1 / 6

Dollhouse Double-Hung Window, 3' x 4', Scale 1:12, Movable Sashes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,27 € – 0,33 € netto (bez VAT)

Dla pliku: 2Lower Window R2.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,30 € netto (środek widełek).

Masa podana przez autora
6 g
Czas druku podany przez autora
11,4 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This double-hung window has flat springs on the sashes that keep them in place after being moved up or down.

Ocena
0 / 5
Polubienia
82
Pobrania
259
Wydruki
0
Wyświetlenia
769
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

You can print sashes that provide 1 over 1 or 4 over 1 dollhouse windows.  The flat springs on the sides of the sashes keep them in place after movement.  I successfully printed everything without support. 

Install each sash by placing one side in the frame slot and then flexing the other side of the frame outward, allowing the sash in the other side.

Let me know in the comments if you would like a similar window for 1:16-scale dollhouses.

 

Tagi