1 / 7
Tension Belt/Ratchet Strap Winder (Spanngurt Wickler) — image 1
1 / 7

Tension Belt/Ratchet Strap Winder (Spanngurt Wickler)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€1.07 – €1.31 net (excluding VAT)

For file: 10mm Insert.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.19 excluding VAT (range midpoint).

Weight reported by the author
19 g
Print time reported by the author
1.06 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Put the insert in the drill and feed it thru the "Tensioner" wind up the belt and pull the drill back out.

Rating
4.875 / 5
Likes
581
Downloads
1,566
Makes
8
Views
9,598
Reviews
8

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

Insert 10mm is for an 10mm drill chuck

Insert 13mm for an 13mm drill chuck

I recommend petg because it has very good layer adhesion.

3-4 perimeters should be enough. I took 20% infill and it works well.

 

V2 now available the only change is a stop now so the insert doesn't fall through.

 

Now with a Handcrank !

its designed to be a slightly press fit, but if its to lose apply a single drop of adhesive oder scale the knob down to about 98%

 

 

Tags