Counting matching models…
This 3D-printed mounting bracket is designed to securely hold a trailer plug using a convenient snap-click mechanism. It is mounted directly onto the trailer, ensuring that the plug stays in place, protected from movement during travel.…
Protective cover for trailer 13 pins plug. Recomended print: Layers: 0.2 Perimeters: 4 Infill: 5% gyroid Material: recomended ABS, ASA, maybe PetG.
The trailer hatch of a toy car broke - so I had to design a small replacement part. Thankfully the original part was mounted with just one single screw.
Want to add a Reese Brakeman Brake Controller to your Toyota Tundra or Toyota Sequoia without drilling any holes? This mount just slips the brake controller on to the lower knee bolster of the dashboard and can slid off when not in use!…
This is designed to replace the coaxial input/output ports commonly found on travel trailers and RVs, allowing you to repurpose those ports for Ethernet connections without modifying or adding new holes to the trailer. The design is…
This is just a simple 1/10 scale off-road utility trailer. It has a trailing arm suspension, and is tested to be trail/off-road ready, and is sized around 1.9 1/10 crawler wheels. Print the frame and suspension components in PETG at least…
Made for two spare tires. just pops into the holes. Easy to print. ENJOY! MRC.
Easy to print and put together. PLS DOWNLOAD and LIKE! THANK YOU FOR SUPPORTING ME IN MY ADVENTURE OF 3D MODELING! MRC.
Hello. Here is a trailer lift for TRX-4M as already been seen and done, this one however is a bit more heavy-duty shaped around axis. First version is regular, for use with standard trailer wheel and screw. You need to provide another set…
The adapter allows a universal mount (4 screws) to be used on a twists-and-locks mount. The Twists and Locks mount is used in some OEM applications , including Nissan, Ford, GM , etc. I recommend ABS or ASA to be used for this part.…
Needs glue to hold the boards to the deck. Check Out my profile for More. Project Updates. Headache Rack Pack. ✅ Lowboy Handless.⏳
Design Description: This storage box is designed to hold the trailer wire and connector which is stored at the rear of a vehicle. I designed it to attach to the bottom of the bumper on my 3rd gen 4runner. It's designed to use 2x M5 bolts…
I make upgrade of Mogsters frame and pole attachment for trailer (Jumbo) from 3DSets. In Trailer you can use longer screw M3x25 instead M3x16. Enjoy it! I make upgrade for Mogster Tipper 4x4, download Stl and change it in 3MF file. :)
After Months of designing Project Lowboy is launched. This Modular trailer can be customized to be short or extra long with as any axles and tires you want to print. I don't have the code up and available anywhere but I'm hoping to get…
RC SCALE EXPEDITION OFFROAD TRAILER I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. 002_Axle_A can be reinforced by…
On my trailer there is a nice connector holder for the 13-pin plug (standard ISO 11446). By mounting it as suggested, the plug fills up with water from the bottom. So I designed and printed a simple cap. When mounting, the plug is closed…
There is a plastic decked trailer and frame that you can glue a piece of wood to. You will need your choice of 3/4 inch diameter semi tires. GLUE IS NECESSARY!!! To make the marker stripe and lights you will need pain markers.
Here's what "On the Road" players have been waiting for for years – 3D trailers! Are you tired of just having cards in front of you? Wouldn't it be much nicer to have trailers that can be attached to your trucks? Here's the solution: Just…
i printed with pla+ and with the ramp facing up
i printed mine with petg cf for strength printed on its side is stronger
Either print it in different colors and glue, or use color change. Technically you dont need support if you are ok with the bridging if printing the body, but I just added a paint on support on the center.
A replacement rear bumper part with holes for the trailer hitch for the Mogster 4x4 with the tipper I did this as a remix, as I used Jan's trailer part which works really well, but their rear bumper part didn't fit with the tipper…
a Simple plug for a 13pin car trailer power outlet, if the original is damaged. It simply plugs in the same way as the power cord. if it has too much play in the plug, just use a bit of electrical tape or similar in the inside to…
trailer ramp for 1/64 BRRRRT RC forklift so you can drive the BRRRRT excavator onto the trailer. the ramp attaches directly to the hitch on the trailer. print ramp on its side and print the connector part on its side. print everything…
Handle for my cargo trailer, if you have a 210mm Center to Center hole spacing like mine here is a replacement. ASA. 4 walls, 20% infill I stole the original metal washers and ground them down to fit,. Adjust the scad to be what you need.
Semi with SuperB Grain Trailers. Two Models, One with smooth side and one with a customizable name plate. Download the front hopper either with or without nameplate. some glue required to assemble. Build your name plate at 84x24x2 mm to…
Abdeckung für die Frontanhängerkupplung, Anhängermaul eines Fendt Farmer 1D. Wahrscheinlich für viele weitere Traktoren passend. Um die Flexibilität und den Sitz sicherzustellen sollte das Ganze mit TPU gedruckt werden. Für eine saubere…
I re-created an updated version of https://www.thingiverse.com/thing:115268 . It now features a hole for a heat insert for a 5mm screw. I'm using the small ones, if you need the large insert, let me know The samples printed are in ASA for…
Build Your Own RC Car Trailer (On-Road + Off-Road Versions) In this package, you’ll get all the STL files needed to print and build your own RC car trailer. It includes two versions: Off-Road (with suspension) On-Road (fixed setup for…
Trailer hitch cover fits 2026 Honda Passport or similar with OEM trailer hitch and 2" receiver. Recommended Print Settings: Material: PETG or ABS recommended for outdoor use (PLA okay for short-term use) Infill: 20–40% for strength Layer…
My truck has an OEM trailer brake controller, but occasionally someone needs to borrow the trailer who doesn't have a brake controller. I keep this mounted inside the trailer, just in case. You will need a cheap bungee cord from Amazon,…
Simple mount designed to accomodate a 7mm cable with 3 12x3 magnet mounts. Takes 5mm x 1.5mm cable ties. Printed with 30% infill, no supports in ASA.
Formrohr Stopfen 25x25 für die Alubordwand von Pongratz Anhängern, Passt natürlich auch in andere 25x25mm Formrohre 25x25mm square tube plug for the aluminum side panels of Pongratz trailers. Also fits other 25x25mm square tubes. Stoppel…
The target was to create a tow trailer for Otto that can remotely lower the loading ramp hook up another Otto or another robot with wheels (not remotely yet) remotely pull the other robot onto the trailer using a winch remotely close the…
Replacement interior cover plate on an AC prep vent on a Hiker Trailer, just add a bnc panel mount extension cable. should be a drop in replacement for the factory cover plate.
I have been using the original 2" Transformer hitch covers for years on my older Nissan Murano. When I updated to a newer 2025 model Murano, the factory installed receiver is now a 1 1/4" receiver. It is also installed up under the bumper…
A trailer coupling for the Mogster based on the Original U406 Rockinger 227G coupling. As it would be to complex and fragile to FDM print, this coupling is not automatic and uses a small D10x2mm magnet to hold an M2x20mm screw embedded in…
A trailer for your benches well they are boats indeed do they deserve a trailer use supports or it won't print id recommend or at least works great for me tree (auto) and top z distance 0.31
This is a plug for covering the trailer hitch port on your car. It fits perfectly with detachable Oris trailer hitches. I printed it in PLA+ with 0.2 mm layer height. In the photo section, you can see the original. I added a little string…
My trailer jack's handle vanished during a short drive, presumably lost its one bolt and bounced off down the highway. This version uses two steel bolts, one through the jack's screw and the other as a handle, and uses nuts with nylon…
I tried every lock on the internet that I thought might work. But in the end I decided to design something for this particular case. Version 2 can be used without double sided tape, it will clip over the door and stay in place. I still…
A product designed and developed by one of South Africa's top Industrial Designers - Theonette Mostert.
This is the simple sparewheel mount for 7mm hex wheel (trx4m standard), that mounts into front sidewalls openings on the trailer. Wheel is secured by 2,5mm screw (as original trx-4m rear sparewheel) S.D.G.
I didnt like how the trailer hitch ball is exposed when not using a trailer. So I designed a cover, which ads a function and a tiny bit of realism to the TRX-4M car :) Inside, there is a small clip that locks the cover just under the…
This is the low height rear stake panel for trx-4m trailer. It has the place for license plate as well. The dimensions fit with sparewheel mount I also designed. S.D.G.
Veloplus gifts you a Flag to Thule Bike Trailers unfortunately, the flagpole is connected by a weak link...
This is the low height side stake panel for trx-4m trailer to accompany rest of side panels I made. I needed the place to attach the rubber bands which hold the cargo in place, and the original side stakes are too high, while using just…
Basically the movable trailer tongue by typhoon21 with a slot for the modular hitch from MrEfz WPL B series chassis parts. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.15 Infill: 20% Filament:…
General purpose rear trailer hitch for the Polet handcart. You can use it to attach and pull other things on wheels. It comes with 2 bottom plates, a small one and a bug one. You only need one. Can be mounted with 4 (or 5 for the large…
Für dieses Modell werden 3 Magnete 6x3mm benötigt. Ich habe die Magnete mit Absicht oben weiter überstehen lassen so haben sie mehr Kraft. Hallo .Wie oft war es schon Hänger schnell anhängen Sicherung raus und hm wohin so der Sicherung da…
I built this storage solution so my trailer plug on my camper has a place to live when not in use. I have upload v5 which drains water better.
Keep your grease in your wheel bearings I Printed with .12 mm layer height, 100% infill, and 3 walls so it would be ridged enough to preform its designed task.
Just a simple 2*3 TTRPG Caravan Printed in PLA at 0.2mm and 15% infill No support needed Compatible for 1*1 inch grid map
Edit: Added a modified model that adds space between the pole and cup to accommodate the 40oz stanley. It was rubbing on the pole and not allowing it to seat into the holder properly. Fits 40oz Stanley cup perfectly. Mounts to any 1"…
This is a simple 2 inch receiver hitch cover that can be left blank or modified to have a design on it. Uses standard size hitch pin to hold it in place. Best with ASA for weather and UV resistance. Print with 5 walls and 15% infill.…
Trailer suitable for Emma train (OS Railway). The trailer uses the same chassis components as the train itself. Have Fun :-)
Here is the Benchy Pickup & Trailer! Support not necessary, but recommanded for the trailer. I design it using Thinkercad application - Tires are from the community Thinkercad's Library. The original Benchy boat (the .stl file) is…
This is an easy to print mounting kit for a Ring Doorbell. Works with Ring Doorbell models 1 and 2. I designed the mount myself to custom fit my siding on my mobile home. The angled mounts and rain cover are altered versions (original…
Base part for the 20-31003-L Blinker for Trailer, i need it to change leds with led cob strips
This is a model I made for my families pop-up trailer (Starcraft Galaxy 6) We gutted the whole thing and built several more beds (large family) and during one of our camping trips we got very heavy rain and unfortunately we hadn't really…
This voluminous UPGRADE SET for your Traxxas TRX-4M and its trailer (#TRX9795) includes the following: (Please have a look at ALL pics to get an overview!) CASE BODY WITH SLIDING DOOR Slip-on trailer case body with sliding door for the…
Horse trailer flap for playmobil 5223. Printed with .6mm Nozzle
sword from elder scroll online trailer from a few years ago, may be an actual sword in game. split for smaller printers/bamboo lab p1s. takes 62.75 in of .5 in rod. Category: Props
A set of curtain hooks and a mounting bracket to hang mesh material over the trailer door to keep mosquitos out. From an experience: in such a small trailer the curtain sometimes gets sat on, which pulls it down. The design here thus uses…
This 3D-printed mounting bracket is designed to securely hold a trailer plug using a convenient snap-click mechanism. It is mounted directly onto the trailer, ensuring that the plug stays in place, protected from movement during travel.…
I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. Minimum print area: 250x120mm UPDATES: 2025/03/20 - added NBC.4…
Protective cover for trailer 13 pins plug. Recomended print: Layers: 0.2 Perimeters: 4 Infill: 5% gyroid Material: recomended ABS, ASA, maybe PetG.
This is a trailer mount for the Mowrator remote control lawnmower. The mount is designed for the top bar of the frame, which I have measured to be 32mm. I have allowed a tolerance for a 2mm rubber gasket between the frame and the mount to…
Blasting out from the pages of the dynamics Skybound comics, let’s bring the scrapped-together trailer turbine which Wheeljack put together! Ostensibly built to tap onto the hydroelectric dam for (laudably green) energy to revitalize…
Created this model for standard size electrical outlet on a trailer to avoid water getting in. Printed with PETG 0,2, but all setting suitable, no supports needed
Replacement plug for a Westfalia tow bar to prevent dirt and debris from entering the socket.
Prints on its side. 4 t/b/w 12 - 15% infill. Blocks in Red are removed and discarded. *Edit non moving wheels These trailers allow for candy to be placed inside as added surprise
Modern Bicycles don't have that particular screw your grandad's bicycle had for height adaptation of the seatpost. But that's the exact place where the (classical) bicycle trailer hook attached to. Dang! At least here in Germany that type…
Print this thing in a soft material, or remix it with a slot/channel for some kind of foam or rubber edge guard. Then put it over the end of your 2" hitch to protect your shins a little from bruises you would get from bashing into it.…
Helps keep trailer safety chains off the ground without structurally compromising them. Great for multiple tow vehicles with different hitch heights. Combining this with quick links (to shorten the chains in an adjustable way) is the best…
When fitted with a full / custom mattress sitting in a doorway of the teardrop tailer might have the following issues: it is not that comfortable, as the mattress slopes out under the body weigght bed sheets etc tend to keep get caught in…
These feet can be clipped on a DOGGYHUT Medium bike trailer in order to raise it off the ground and have it stand stable when the wheels are detached. The feet can be further secured in place with zipties. It is also advised to apply a…
I was annoyed that the securing strap of my hinterher Hxxl bike trailer hung around when not in use or used as handcart. So I made this small clip that fits on the Weber drawbar and secures the belt. If someone wants to adjust things I…
Dust cover for a trailer bearing saver. Printed in TPU with the fuzzy setting to give it a different look.
made for 10mm round rod (hole has 10.5mm diameter with 30mm depth)
I designed this for my goose-neck horse trailer (which uses ST235/80-R16 tires) when ours was inadvertently left at a horse show. This is a large print and it is suggested to use a large number of perimeters to give strength to the…
