Car / Windshield fluid funnel - 38mm tube
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.32 – €6.51 net (excluding VAT)
For file: model-3-windshieldfluid-funnel-shorter_0.4n_0.2mm_PETG_MK4S_4h33m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.91 excluding VAT (range midpoint).
- Weight reported by the author
- 110 g
- Print time reported by the author
- 4.54 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Windshield funnel 38mm for model 3 / tesla to make pouring easier
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 48
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Windshield funnel made for my 2021 - model 3, wanted something way easier to pour into.
the OD of the base of the shaft is 38mm and the funnel max diameter is 125mm
I recommend printing in petg funnel down on the build plate with no supports, 3perimeters (6 total)
The longer version is pictured