Counting matching models…
This truck/bogey set can be printed out in multiple materials, snapped together without hardware or glue, and can use generic plastic or metal wheel & axle sets. The tongue on the crossframe has the tower with a hole through it to mount…
toyota once created a logo specifically for their pickup truck line, which was unfortunately rather short-lived & never really made it onto the vehicles except by we enthusiasts. many such emblems have been made over the years in various…
Hypno Wheel - for 1:10 scale radio controlled trucks. I was watching racing and some teams paint patterns on the wheels that animate when the car is rolling. I made an animated wheel design using Onshape CAD. One thing led to another and…
When my kids were little they were all about Monster Trucks and I found the original model From Dedo Yaga so I could print they some fun toys. They loved them! But... The suspension wasn't "Kid Proof" and broke easily. I tried variations…
Print the base in ABS or ASA so it doesn't creep over time, or don't it might be fine in PLA/PETG it's only a little RC sitting on it. Print the top piece in TPU if you want a bit of grip, use foaming TPU if you want it to be extra soft…
UPDATED VERSION HERE: 🚗 Solar Meshtastic / Meshcore Car Node – Any Panel Edition! Tired of the original solar panel being constantly sold out? I’ve remixed this awesome low-profile car node so you can use any 5V solar panel you want! This…
So, you can take this model and customize it to say the muscle truck/wagon name on the small slope, and add badges or anything you'd like on it, screw it to a wall, and display your models!!
These are smaller variants of my moon rover trucks. Includes a 6 wheeled crane truck and a 4 wheeled laser cannon truck. Meant to be printed at about 1/64th scale (the average size of a Hot Wheels car) Also the wheels in the 6 wheeled…
I had a problem with my decks splitting near the bolts. I hope this little TPU spacer will spread the load a bit. Made for Indis might fit others. It is designed to be scaled up in the z-axis in your slicer to the height you need. The…
With this stl file you can print gas canisters for WPL RC Trucks in 1:16 scale or diecast models. The stl file can be rescaled for other scales. The gas canister can be printed without support materials! If there are any questions, please…
Dieses Set enthält eine Waffenkiste mit zwei Fliegerbomben aus dem zweiten Weltkrieg. Das Modell hat den Maßstab 1:16 und eignet sich perfekt für 1:16 WPL RC Trucks, oder andere Fahrzeuge im Maßstab 1:16. Die Bomben Modelle sollten mit…
With this model you can print a weapon box with artillery ammunition in 1:16 scale as a cargo for WPL RC Trucks. We also have the perfect to this ammunition fitting howitzer model if you follow this Link:…
I'm not the original creator of this look, but I am the one who converted it to be 3D printed! Enjoy! Category: 2D Art
Because of the co-planer bushing geometry of Valkyrie trucks, the pivot part of the baseplates sticks out quite a bit. For those who use short race boards, the rear baseplate got damaged very easily. This is a very minimal scoop shaped…
Warnbarken im Maßstab 1/14 (zB. Tamiya Trucks) in gerader und Pfeilausführung mit oben aufgesetzter Lampe. Der Fuß ist seperat und mit verschiedenen Aufnahmen. Die Beispielmodell habe ich mit der MMU3 gleich in der passenden Farbe gedruckt.
Monster Truck Wheel Hub – Compatible with Hot Wheels Monster Trucks Bring a broken Monster Truck back to life. This is a reinforced replacement wheel hub compatible with Hot Wheels Monster Truck toys — a direct fix for a cracked,…
Screw cover for trucks with tightening control. With Tatra logo on top. It is first version, i have to chack how fit.
This cute toy gas can is the perfect accent to any toy car collection! Help your toddlers know the importance of refilling the gas tank when playing with their toys so they are prepared when they get older. This model can easily be scaled…
A friend asked for a hot wheel dual track with 8 mm spacing for Monster Trucks. Inspired by https://www.thingiverse.com/thing:1797697 (thanks!) Added a latching mechanism (with a single button) Added rails on the top side to minimize…
Modification of the base for Model Railroad Boxcar . Recess and boss added for mounting Lionel trucks. Boss to position the height of a Postwar truck to clear the front of the boxcar. Compared against lionel postwar boxcar, the bottom of…
A set of futuristic ground vehicles for a generic SciFi setting, at 6mm scale. This set is designed to match the SciFi Road set of parts I have uploaded. This set is intended to be compatible with the other 6mm SciFi terrain sets I have…
This truck/bogey set can be printed out in multiple materials, snapped together without hardware or glue, and can use generic plastic or metal wheel & axle sets. The tongue on the crossframe has the tower with a hole through it to mount…
This truck/bogey set can be printed out in multiple materials, snapped together without hardware or glue, and can use generic plastic or metal wheel & axle sets. The tongue on the crossframe has the tower with a hole through it to mount…
Welcome to the Galactic British Empire RoboTommy interfaces with these service trucks to ensure that all of the Empire's colonies continue to run smoothly
Just a simple mount to convert generic USB truck handbrakes from Amazon/aliexpress into the vertical position, using the original desk clamp.
This is a set of car and truck stands that you can use in order to display your shelf queens with style and avoiding to damage tires over time. They are designed in order to fit the bottom of different models, especially Tamiya. They…
Longboard Trucks Hanger Inserts for Atlas, Bear Kodiak, Bear Gen6, Caliber v2-v3, Khepri Nenuphar, Paris Savant, Paris v2-v3, Gullwing Reverse, With Precision and one for a trucks with spherical bearing (Don't Trip, Rogue, Exile, Scythe)…
This is a 9:1 ratio gearbox designed for Drommon's Wraith Clodbuster build. It works perfectly with a Hobbywing 3700KV 3660 motor and a 3S LiPo battery. This setup uses a Traxxas Bandit TRX 9480 differential with 500K oil. I tested a…
No supports needed, just male sure it's oriented with the flat part down and thr connector pieces up. Once printed, I used an M3x20 screw and nut to adjust tension. The flat part used double sided sticky tape to mount it to the window,…
My daughter wanted a Sparkle Smash unicorn monster truck and my son wanted Grave Digger and Bigfoot , so I tried to make simple version of them each body is a .3mf file with the different parts ready to go for multicolor printing or just…
toyota once created a logo specifically for their pickup truck line, which was unfortunately rather short-lived & never really made it onto the vehicles except by we enthusiasts. many such emblems have been made over the years in various…
Starting with El Toro, the friendly 1/64 scale monster truck mash up, a new obsession. They are fun, quick simple prints. They can be easily painted if you have an MMU. After El-Toro, a revision of Big Foot adding doors and glass…
Really wanted to make it completely printable without having to use glue. Mission accomplished ;) Prints in 8 pieces and requires easy assembly. I still see some room for improvement, and printing it in the right material would definitely…
Just use double sided tape and you should be good ;) Approximately 2mm thick everywhere. UPDATE 1: Included a mold if anyone wants to make it that way. Category: Automotive
This upload includes the most up to date STL model versions of my road, city, railroad, and monster truck stunt ramp track pieces. Connect them all to create a toy city! Compatible with most toy cars from many brands such as Hot Wheels…
World of Trucks Emblem of EuroTruck Simulator 2 and American Truck for my MOZA wheel brand emblem casing. I printed in a Bambu Lab A1 mini using eSUN PLA+ filament
Hypno Wheel - for 1:10 scale radio controlled trucks. I was watching racing and some teams paint patterns on the wheels that animate when the car is rolling. I made an animated wheel design using Onshape CAD. One thing led to another and…
🛠 Soviet 52-K 85mm Anti-Aircraft Gun – 1:16 Scale 3D Printable Model for WPL RC Trucks 🕰 Historical Background The 52-K (model 1939) was an 85mm Soviet anti-aircraft gun developed in the late 1930s and used extensively during World War II…
all the firetrucks i have made so far in front of a fire station
Car, Trucks, and Garage: Print-in-Place About the Model Bring endless fun to playtime with this adorable set! Perfect for kids (or the young at heart!), this set includes a car, pickup truck, and moving truck—plus a garage to park them…
It is what it is, kinda works cause there are marks on mine from the hanger. Dimensions are same as original. Print in TPU 95a 100% infill, fuzzy skin 0.1/0.1.
Introducing modular platform for all sort of builds Modular trailer for RC cars and RC semi-trucks at scale mainly for 1/8 - 1/10 as designed, however it can considered for 1/14 scale due to its compact size and variable platforms (see…
I created some drift wheels to have a lot of drift fun with my Monster TruckI created some drift wheels to have a lot of drift fun with my Monster Truck for a long term use i made the tires changeable. these are hold by beadlocks mit 3mm…
This is a model of the largest land crane out there, the Sarens SGC-250, aka the Big Carl. Built by a Belgium company and shipped to Somerset, England to help build the Hinkley Point C nuclear reactor. How large is this crane? It can lift…
We all know the Walthers Amfleets roll like a brick. The proto versions are newer yet they roll worse than the older 932-series cars. So, why wait for Walthers new ball bearing trucks to be release sometime late next year and cost you $30…
Fingerboard mod in order to install standard mini trucks, depending of the trucks used, it will be needed to drill the screw holes at the correct position by marking holes from the trucks itself. Supports ultra-advised !
Made to fit Paris truck with a 60mm motor and 80mm wheels. Modeled in Fusion 360.
On the Toyota Tacoma Pickup (1995.5-2004) and 4Runner (1986-2002) and 4WD Pickup/Hilux (1986-1995) models, with suspension lifts over 2", the front CV axles will operate at an increased angle, which increases wear and tear on the CV…
Really cool long ford.
glue the 2 halves together.
Here are the 0.85" wide "Pizza Cutter" rims and tire that go with the rims I designed here. The numbers should correspond to those rims, so you can match the wide and narrow rim design. I'm lazy, so I am not going to upload any pics here,…
Here is a drift sleeve for the rims I have designed for my and my son's Traxxas Rustlers. The original 3.00 x 1.925 rim I designed for off-road use is here. and the additional rims I designed are here . I'll have to find the model for the…
EDIT 2 Here are the 0.85" wide rims and tire for the front of your 2WD if you want that dune buggy look. EDIT 1 I added rim design 011 through 014. I also slightly modified rim 008 by adding an 0.030" fillet on the top edges. ORIGINAL My…
This is another wedge and strap for a 3S LiPo battery like this one here , but this one is for batteries that are too long for the tray, not too thick like the previous one I made. I thought I had all the dimensions correct, but the…
** UPDATE ** I modified the battery strap slot so it can be turned up side down and used to hold batteries that fit in the compartment like they are supposed to so you don't need to carry your flat strap if you don't want to. Also, if…
Here is a bracket I designed to mount a longboard on the wall. Should be used with a washer-head screw and I recommend mounting into studs or at least drywall anchors. The top bracket only uses one screw so the bracket can slide down on…
I was looking on Printables and Maker world for a way to display these Lego monster jam trucks and there weren't any designs, so I spent a night designing my own. The final product is a simple wall mounted hanger that can grab the front…
Inspired by the coal trucks on the Tipong Colliery Railway in Assam India. (Also I tried my best on the dents, it's not easy on tinkercad)
Created a basic connector in OrcaSlicer to combine 2 Hot Wheels tracks for Monst Jam/Hot Wheels monster trucks. Created with size 17.5, 20, 22.5, and 25mm gaps- measuring the cube between connectors for gap space (see picture). I've found…
When my kids were little they were all about Monster Trucks and I found the original model From Dedo Yaga so I could print they some fun toys. They loved them! But... The suspension wasn't "Kid Proof" and broke easily. I tried variations…
Painted by my brother. Glue is needed for assembly.
Print the base in ABS or ASA so it doesn't creep over time, or don't it might be fine in PLA/PETG it's only a little RC sitting on it. Print the top piece in TPU if you want a bit of grip, use foaming TPU if you want it to be extra soft…
This is a perfect fit for MBS Matrix II trucks. Allows mounting the T6 CREE LED style bike light to your truck hanger. Print Settings: No PLA - requires PETG/ABS or similar for strength Max out perimeters for solid print (set to ~20)…
UPDATED VERSION HERE: 🚗 Solar Meshtastic / Meshcore Car Node – Any Panel Edition! Tired of the original solar panel being constantly sold out? I’ve remixed this awesome low-profile car node so you can use any 5V solar panel you want! This…
3D printed replacement fuel filler neck housing designed to replace discontinued Mopar parts 4185529 and 4279778 . Intended as a direct-fit service part for aging OEM units that commonly crack or degrade. Fitment: 1981–1993 Dodge D150 /…
So, you can take this model and customize it to say the muscle truck/wagon name on the small slope, and add badges or anything you'd like on it, screw it to a wall, and display your models!!
These are smaller variants of my moon rover trucks. Includes a 6 wheeled crane truck and a 4 wheeled laser cannon truck. Meant to be printed at about 1/64th scale (the average size of a Hot Wheels car) Also the wheels in the 6 wheeled…
Easy print in place truck models. Includes a Big Rig Semi Truck, and 2 Pickup Trucks as well as a bonus semi-truck box trailer. The wheels do not spin.
Toyota Hilux Arctic Trucks as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Ikea Skadis top shelf for Hot Wheels trucks Skadis_top_shelf_spojka - brim 5mm, no supports top_shelf_skadis - no brim, no supports Use glue to stick the U profile
Vintage Trucks - 1956 Ford F-100 Pickup 3D printable model.
Published at the request of someone on the ColoradoFans truck forum. https://www.coloradofans.com/threads/phone-mount-that-doesn%E2%80%99t-block-vents.439522/ . I did the design 3+ years ago, then revised for my current Pixel 7 Pro. I…
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Here you will find such brands: American and Asian car models Acura BAIC Buick BYD Cadillac…
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
I completely made this by myself but it is inspired by another model: https://www.printables.com/model/319649 . The wheel comes in three variations: for 6mm, 8mm, and 10mm axles. Hardware needed: 6 M5 x 20 allen (inbus) bolts 6 M5 nuts 2…
1:400 Catering Trucks Some may need re-scaling, some may need support. Experiment and find out.
This is a more robust, reinforced, and adjusted version of the street light bracket for MBS Matrix II trucks. Allows mounting the T6 CREE LED style bike light to your truck hanger. This positions each light behind the hanger such that…
NOTE: This is a concept model used for testing and a show model. Never ever use these as a replacement for the real thing! If you decide to try them out, be careful and use proper safety gear. Use at own risk. This was a weekend project i…
This is a hub for Trampa Gummies 125mm 'Tires'. It allows for a high gearing ratio, and places the Bearings further apart. This gives high stiffnes to the driven pulley, and as a result eliminates belt slip. You will need a 61807 Bearing…
These are just some dummy/vanity wheels you can put on your drag chassis to make it look/sit semi realistically on the shelf while not being used, rather then have your race rubber tyres or sticky, smelly old rubber tyres sitting on the…
So that the fun of the game continues even outside the bathtub, I provide two trucks to transport the containers. So let's get to the fun of the game.
HO scale model railroad 100-ton freight trucks. Hole fits a 2mm screw. Works with FDM printing. Tested with 33" and 36" Walthers wheels.
Cobra Theme Diff Cover for WPL 1/14 and 1/18 scale Trucks
Print it from PETG/ABS/ASA for higher strenght. Use little piece of cardboard on top of airtag or double side tape.
I couldn't find anywhere in Spain correct pivot cups for my Bear Grizzly and Slant Longboard trucks, so I decided to print one. I am testing it for 3 weeks already and they are working very well. No signs of usage. Size: out: 19,6 mm in:…
🇬🇧: Logo of brand Renault trucks with multicolors on one layer with colors change File compatible MMU GCODE available for a single extruder No instructions for print… It's just a logo ^^ ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ 🇫🇷: Logo de la…
My work truck is a 2012 GMC 3500 with a 12' box attached. The knob for the window cranks on these vehicles are of piss-poor design and material. So i fixed it, no thanks to GM. The print is one piece and utilizes a "captive nut" system. I…
Here you can find cargo for loading trucks. Bags, barrals, pipes… All models are sized for British n-scale (1:148). Conversion values: Continental N-scale, 1:160 -> 92.5% TT-gauge, 1:120 -> 123% HO/H0-gauge, 1:87 -> 170% OO/00-gauge, 1:76…
You don't have a 3D-printer? Buy the kit (if needed request for different scale): https://www.coppermineminiatures.co.uk/product-page/n-gauge-vehicles-1902-thornycroft-steam-wagon-5-options ---- Here you may find more cargo for loading…
