Double Track Connector For Monster Jam or Hot Wheels Monster Trucks

Created a basic connector in OrcaSlicer to combine 2 Hot Wheels tracks for Monst Jam/Hot Wheels monster trucks.

Created with size 17.5, 20, 22.5, and 25mm gaps- measuring the cube between connectors for gap space (see picture). 

I've found that the above sizes, particularly 17.5 and 20mm gaps, work much better with ramps and other parts, such as the links below. The gap for these are typically smaller than that of other spacers/connectors I've found. 

I've found you really don't need a ton of these, but for places such as the top of the double loop pictured or aligning older warped pieces, they work great for helping those monster trucks make it to the end of the line!

I've also included some 3mf versions of these unassembled, so feel free to tweak as needed! 

Settings I've found print well on my FFADM5 :

• 04 mm nozzle, 0.2 mm layer height

• Line Width

  • First Layer: 0.55mm

  • Top Surface: 0.55mm

• Walls and Surfaces

  • Only one wall on top surfaces 

  • Only one wall on first layer

• Infill

  • Sparse Infill Density: 22.5 (for added strength, reduce if desired)

  • Sparse Infill Pattern: Grid

Parts I've found these work well with:

https://makerworld.com/en/models/1778005-hot-wheels-compatible-double-wide-loop-base?from=search#profileId-1893717

https://makerworld.com/en/models/1016039-dual-90-45-degree-curve-pk-hot-wheels-compatible?from=search#profileId-2378650

https://www.printables.com/model/373442-hot-wheels-ramp-remake

https://www.printables.com/model/1070544-hot-wheels-dual-track-connector-fits-monster-truck