Longboard Trucks - (PolyDryer Promo Video)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Longboard trucks that featured in the PolyDryer promo video.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 60
- Makes
- 0
- Views
- 2,213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in PolyMide™ PA612-CF with 10 perimeters and 45% infill.
Grommets Printed in PolyFlex™ TPU90 - printed solid with perimeters. This made the board handle well at slow speeds, for a stiffer ride try PolyFlex™ TPU95-HF.
Print 4 x Wheel Spacer.stl - offset the wheel from the T-Bar.stl
List of non-printed parts (part list below will make 2 sets of trucks):
2 x M8 threaded rod cut to 200mm length
4 x M8 Nyloc nuts for securing wheels - washer optional
2 x (10mm x 60mm half threaded bold) M8 thread - See reference pic
4 x M10 washers to secure 3D printed grommets
2 x M8 Nyloc Nuts to fix trucks together
8 x M4 bolts and corresponding nuts for attaching trucks to board - Nyloc recommended.
*These trucks were designed specifically for the PolyDryer™ promo video and are not intended for heavy use - ride with care.