Longboard Trucks - (PolyDryer Promo Video)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longboard trucks that featured in the PolyDryer promo video.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 2213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in PolyMide™ PA612-CF with 10 perimeters and 45% infill.
Grommets Printed in PolyFlex™ TPU90 - printed solid with perimeters. This made the board handle well at slow speeds, for a stiffer ride try PolyFlex™ TPU95-HF.
Print 4 x Wheel Spacer.stl - offset the wheel from the T-Bar.stl
List of non-printed parts (part list below will make 2 sets of trucks):
2 x M8 threaded rod cut to 200mm length
4 x M8 Nyloc nuts for securing wheels - washer optional
2 x (10mm x 60mm half threaded bold) M8 thread - See reference pic
4 x M10 washers to secure 3D printed grommets
2 x M8 Nyloc Nuts to fix trucks together
8 x M4 bolts and corresponding nuts for attaching trucks to board - Nyloc recommended.
*These trucks were designed specifically for the PolyDryer™ promo video and are not intended for heavy use - ride with care.