Liczymy pasujące modele…
This is a simple and quick to print wall hook for a hanging a longboard to the wall. I used a 1/8 inch thick screw to mount it, which is a little under 4 mm for those using smart person units. I printed it on the side, which gave it…
Evolve AT motor cover 3 sizes: Normal 2 inch 3.5 inch (Full motor protection) Print Settings Printer Brand: Creality Printer: CR-10S **Supports:** No Resolution: normal **Infill:** 30 Category: 3D Printing
This is a drop through long board wall that works with command strips. You should print two, one for the bottom and one for the top. When attaching to your wall make sure long board is resting on both the top and bottom mounts to ensure…
This is a simple and quick to print wall hook for a hanging a longboard to the wall. I used a 1/8 inch thick screw to mount it, which is a little under 4 mm for those using smart person units. I printed it on the side, which gave it…
Torque Blocks for Rocket Simplex, follows shape of the deck. Width 8.5". Print in TPU 95a. 0.2 Layer Height 6 Top Layers 3 Bottom Layers 3 Perimeters 12% Gyroid Infill 0.1/0.1 Fuzzy Skin Use adhesive double-sided tape (3M VHB) to fix it…
Bumper was built to work with longboards from Skateshred (https://www.skateshred.com/wholesale-blank-longboard-decks/38-and-40-x-9-5-drop-through.html) The original design intended to connect to the central mounting location for the…
This is a drop through long board wall that works with command strips. You should print two, one for the bottom and one for the top. When attaching to your wall make sure long board is resting on both the top and bottom mounts to ensure…
I needed a slim wall mount for my boards and I wanted a horseshoe style that wouldn't really be seen. This design can use M5 heat set inserts or M5 nuts instead.
I printed it in PETG but it crackt at the walls on the side from it goes on the shaft i was riding on gravel roads and the vibrations cracked it i think it would be solved if you just print it from TPU
Universal ESK8/Skateboard/Longboard Accessory Mount This mount is designed for skateboards and longboards to support accessories that typically use standard bicycle handlebar mounts , including headlights, taillights, and action cameras.…
My little one (not the cat) likes the longboard. Now he has something to hold onto. Hole patterns for both old and new and will work with your spare board hardware (but longer) or M5. I printed this out of CC3D 72D because it has some…
Handle for carrying longboards. The handle is as shallow as possible, but still deep enough to let me fit my fingers around it. Supportless print. For attaching it, I've used two countersunk M5 screws and self locking nuts. Two holes need…
Hi there, here is my skateboard/longboard wall hanger that was designed to fit into a tight space behind my apartment door. The model is light-weight, prints relatively fast and is strong where it needs to be. I would recommend printing…
Use it as a template to drill new mounting holes on my longboard. The holes are 0.375" apart so the template is compatible with both new school and old school patterns. I made holes 5.4mm in diameter and 11mm in depth/height so drill bits…
As my electrical longboard has hard wheels and i wanted to soften them a little bit i created an adon for 90mm wheels. I have not tested them while driving so far because of winter so i can not say if they do the job as they should. I…
A friend bought a wowgo 3e and within a few days the front pivot cup had all but disintegrated, and the rear wasn't far behind. I took a few measurements and whipped this up, printed it in TPU and it's been solid since (been a few months…
Wallmount for longboards. 90mm wheel in picture, 83mm and 97mm also added in the files. With an added hook to hang your receiver and/or key. Print one mirrored to get both hook openings on opposite sides. Print Settings Printer: Ender 3…
As you can see on the photos I used the replacement everyday for over a month. I used PLA for the print. I would recommend ASA or PETG.
Wheel mount for 70mm wheeled longboards. 0.4mm nozzle 0.2mm layer height 2 walls (yes, I know it's hard to believe) tree supports 20% infill
Some parts for turning my Longboard into an electrified one :) The MotorMount is for prototyping. I think I have to make one out of aluminium. The mount is designed for a C6364 245kv Brushless Outrunner Motor
Designed these to add some shock absorption to my longboard with TPU risers and reduce the teeth-rattling feeling I had going over cobblestones. These fit standard drop-through trucks and match the hole pattern for mounting. They're 2mm…
I used this longboard mount (the 70mm version) on the inside of my outdor closet door for our longboards. The boards would swing when I opened the door so I made some bottom supports from the original model to stabilize them. It…
protection for you longboard or skate recomendations: print with petg, pla plus or other resitent filament. 100% infill. no use rivets, use 5mm screws and anti-unscrewing nut
Longboard holder as shown in the Original LED-TECH.DE ptroduct video for FREE download! Material: PETG Layerheight: 0.2mm Infill: 25%
There are probably many other wall mounts out there for skateboard/longboards, but I wanted to make my own to print on my old Creality CR3040 (if you Google it, look for a pic with a yellow lion inside). It takes 2h7m to print with 0.8…
I created these spacers to fit between the axle and the bearings. You need two for each wheel, so print eight items. Outer diameter 10,5mm Inner diameter 8mm height is 2mm, but scale to your requirements Printing: no special instructions…
Height is 40mm. Print in TPU 95a filament 100% infill, 0.1/0.1 Fuzzy Skin. Use washer DIN 9021 M5 on top of footstop. There is a washer in this pack wich could be used between board and footstop so it could rotate like Riptide Slab and…
Torque Blocks for Downhill Longboard. Width 7.75" to 9.5". Print in TPU 95a. 0.2 Layer Height 6 Top Layers 3 Bottom Layers 3 Perimeters 12% Gyroid Infill 0.1/0.1 Fuzzy Skin Use adhesive double-sided tape (3M VHB) to fix it on the deck. It…
Torque Blocks for Rocket Simplex, follows shape of the deck. Width 8.5". Print in TPU 95a. 0.2 Layer Height 6 Top Layers 3 Bottom Layers 3 Perimeters 12% Gyroid Infill 0.1/0.1 Fuzzy Skin Use adhesive double-sided tape (3M VHB) to fix it…
Longboard / skateboard pivot bushing. Material: TPU ------------------- This model was created and can be changed with FreeCAD realthunders branch (https://github.com/realthunder/FreeCAD/releases, Stable 2024.10.03)
Torque Blocks for Downhill Longboard. Width 7.75" to 9.5". This “Spoon” version is advanced design made with cutout specialy for standup slides. Print in TPU 95a. 0.2 Layer Height 6 Top Layers 3 Bottom Layers 3 Perimeters 12% Gyroid…
Torque Block / Race Tail for Landyachtz Small Blind. Follows the shape of the board. Print in TPU 95a. 0.2 Layer Height 6 Top Layers 3 Bottom Layers 3 Perimeters 12% Gyroid Infill 0.1/0.1 Fuzzy Skin Use adhesive double-sided tape (3M VHB)…
Foot Stop inspired by Summerboard Foamies Footholds. Height is 50mm. Print in TPU 95a. Use washer DIN 9021 M5 on top of footstop. 0.2 Layer Height (0.4 nozzle) 12 Top Layers 12 Bottom Layers 6 Perimeters 50% Gyroid Infill 0.1/0.1 Fuzzy…
Longboard Concave Implant - Toe Riser. Locks front foot in tuck or in stand up heelside slides. Print in TPU 95a. Some users prefer it slightly lower at 6mm high or even 4mm and this model scales perfectly in slicer to any size, not only…
Longboard Trucks Hanger Inserts for Atlas, Bear Kodiak, Bear Gen6, Caliber v2-v3, Khepri Nenuphar, Paris Savant, Paris v2-v3, Gullwing Reverse, With Precision and one for a trucks with spherical bearing (Don't Trip, Rogue, Exile, Scythe)…
Longboard Concave Implants. Old concept and shapes but still worth sharing I think. Print in TPU 95a 100% infill.
Longboard Toe Stop for additional lock on board. You need to buy a metal steel or aluminum corner 40x40x4mm and cut it using pdf template. Print pdf file in 1 to 1 dimensions, there is such option in print settings. Check the dimensions,…
FR J'ai modélisé pour mon longboard ces caches roues/enjoliveurs pour éviter que poussières et saletés se logent autour des roulements, et surtout pour un aspect esthétique (les roues de bases n'étant pas les plus belles). Il y'a deux…
When you're busy with longboards, skateboards and surfskates, it's easy to swap wheels and end up with a variety of different ones. It annoyed me that they were floating around loose in a drawer. So I designed this box in TinkerCad, which…
FR Un système de fixation pour attacher plus ou moins ce que vous voulez sur votre planche important ! ce modèle est conçu pour les planches aux percages “Old School” assemblage : pas compliqué, assemblez la pièce principale entre la…
With this longboard holder your longboard will never be in your way again. The holder is attached to the wall with standard countersunk screws. Print the holder lying on its side, so the holder has the maximum strength
With this longboard holder your longboard will never be in your way again. The holder is attached to the wall with standard countersunk screws. Print the holder lying on its side, so the holder has the maximum strength
This is a Mudguard designed to go on all 4 wheels of your longboard and uses all standard hardware that you use to attach your wheels to the trucks. They attach to the longboard trucks to allow them to move with your wheels and will never…
Parametrized longboard wall hang. Strong and sturdy. Included .stl and .gcode files are for a longboard with 70mm wheel diameter, 60mm wheel width and 225mm truck width (wheel center to wheel center). Fusion 360 file included to change…
Use at your own risk These wheels aren't as strong as original ones, tpu tires can be tricky, stay careful if using them, use it more for experimenting and having fun rather than for a real everyday use V0 = flat tire; V1= Medium rounded…
A simple hook. You need 2, and the width between them can vary based on what you want to hang. Using it for multiple years now. PLA broke after 2 years for me, so use something stronger or beefy print settings and make sure not to…
Print 2 mounts with the side of the mount against the bed for strength. These specific mounts were designed for wheels with an 80mm diameter and 56mm width. I used 1-½" screws to fasten them to the wall.
Decided to create some wheels for a M-1 Teemo Longboard to be used while driving on sand. Designed to be printed with a dual extruder printer although I am working on a two piece design that fits together after printing. The model has…
A case for your electric longboard, includes 18650 battery case. Uses all skateboard screws to assemble it.
A vertical longboard holder, or dock for the Oxelo Original spirit (or at least how I identified the board it should work with) I can't tell what other boards it can work with since I have nothing else to try. If you check the picture,…
It has very nice bottom, also the goal was clear. Make a reverse mount :). It has small latch on the top with spring and its easy to put in on and off. You will need: few centimeters of 2mm steel rod. 1x soft spring with diameter of 13mm.
FR J'ai pas grand chose à dire, juste une protection pour l'arrière du longboard Oxelo Original Spirit, nécessite des supports, devrait tenir sans trop de problèmes. Les dimensions actuelles font qu'il est plus adapté en tant que…
This is a baseplate for a zero degree truck for a longboard. This would normally be for a board you want to setup for LDP - long distance pumping. To make this work you would need to have this file laser or plasma cut out of steel, then…
This is a mount to attach a flashlight to a ldp gbomb bracket longboard. I used a 800 lumen flashlight from walmart but the design would work with other flashlights. You need a few zip ties and nuts/bolts as well. The smaller part that…
Clip/Snapping holder for electric longboards. All of the holders online had the wheels facing the wall. This does not work for e-skates because you need access to the plugs. Others had the board high up in the air horizontally. This also…
Angle wedge risers for Arsenal cast and precision trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather…
Angle wedge risers for Atlas cast trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a right angle…
Angle wedge risers for Bear Grizzly 852 840 (gen5) cast trucks. There have been two variants of the fifth gen bears, so here are two versions for both - one without cutouts on the side and with the protruding “bear” logo on the baseplate…
Angle wedge risers for Bear gen6 cast trucks, probably fits Smokies. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a…
Angle wedge risers for Bear Kodiak forged trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a…
Angle wedge risers for Caliber II, III cast and precision trucks. Probably fits first gen Calibers and Gunmetal. Also fits Randal RII 42 and 50, maybe fits other Randals. These risers follows the shape of the truck base, so they looks…
Angle wedge risers for Don't Trip precision trucks. Fits DH-Cybins and Haki and probably all of the rest. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made…
Angle wedge risers for Exile Hydra precision trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a…
Angle wedge risers for Gullwing Charger cast trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a…
Angle wedge risers for Gullwing Reverse cast trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a…
Angle wedge risers for Kahalani cast trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a right…
Angle wedge risers for Khepri Nenuphar cast trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a…
Angle wedge risers for Liquid Fire precision trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a…
Angle wedge risers for Paris v2 v3 cast and Savant trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather…
Angle wedge risers for Rogue cast trucks. Maybe fits some old precisions. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a…
Angle wedge risers for Rojas Hybrids cast trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a…
Angle wedge risers for Ronin cast trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a right angle…
Angle wedge risers for Ronin precision trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a right…
Angle wedge risers for Seismic G5 cast trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a right…
Angle wedge risers for Sabre Forged mk1-mk3 trucks. Forged mk3 also fit Sabre Standard, Street and Cast Precision baseplates. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck…
Angle wedge risers for With Precision trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a right…
Angle wedge risers for Valkyrie precision mk2-mk4 trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather…
Old School foot stop designs replicating the PSD models. Height: 25 mm. In my opinion, they are outdated as they are too low and lack curving on the top edge. The mini version has been slightly improved, now standing at 30 mm in height…
This is for my board with 130mm trucks and 60mm wheels (landyachtz dingy blunt)
Skateboard Rad / Skateboard wheel / Longboard wheel D70 x 43 !!! HAFTUNGSAUSSCHLUSS !!! Ich habe sie nicht getestet. Für den Reifen empfehle TPU möglichst hart (100% Füllung). Für die Felgen empfehle ich PETG (100% Füllung, vielleicht…
Skateboard Rad / Skateboard wheel / Longboard wheel D70 x 43 !!! HAFTUNGSAUSSCHLUSS !!! Ich habe sie nicht getestet. Für den Reifen empfehle TPU möglichst hart (100% Füllung). Für die Felgen empfehle ich PETG (100% Füllung, vielleicht…
Here's a variety of different longboard bushings. Cones (4 different heights), barrels (4), chubby's (2) and magnums (2). I also added fat cones. The pressure needed to turn and the angle it becomes harder are dependent these shapes. The…
A riser to fit between a longboard truck and the board, with an integrated handle. My board doesn't have a kicktail, so i can drag it behind me like a wheeled suitcase instead of holding onto the truck itself. Print in ABS or hard TPU…
Bumper was built to work with longboards from Skateshred (https://www.skateshred.com/wholesale-blank-longboard-decks/38-and-40-x-9-5-drop-through.html) The original design intended to connect to the central mounting location for the…
While similar to other longboard racks, this design is meant to provide a one size fits all alternative. Most wall mounted racks hang the board from the wheels, meaning if someone has wheels that are too big or too small, the rack does…
Angle wedge risers for Penny trucks. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a right angle…
Angle wedge risers for GOG Foxy, Homer, Racer X trucks, includes versions for fixed and adjustable baseplates. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also…
I made this moddel in freecad in a few minutes, so nothing big. my longboard has a really flat deck, so if yours is more concave or has a kicktail it might not work. Should be printed at at least 2mm Wall thickness and 20% Infill to be…
Soporte para longboard-Skateboard, impreso en PLA, aunque en ABS o PETG podria tener mayor resistencia.
If you like this model, check out my profile for more designs and don’t forget to leave a like or follow! Description: This set includes 49 different bushings for longboards and skateboards. There are 7 shapes (Barrel, Cone, Fat Cone,…
Top part print in TPU 95A, soft basement TPU 85A. Mirror in slicer to make it for goofy. Use washer DIN 9021 M5 on top of footstop. Added modifier part, put it in slicer like modifier and set 100% infill for it. 0.2 layer height 6…
A couple of risers for longboard trucks. They're both 5 degree, you may need longer screws for the 9mm one. The 1mm riser is wedged with the higher side on the inside of the board, tilting the trucks outward. It's meant to increase…
Angle wedge risers for Skoa Vapor trucks, 47 and 26 baseplates. These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle,…
Two STL files (main block + function keys) that fill the keyboard cutouts of a Commodore 64 longboard case. Notes on Fit Required several test prints with small tweaks to fit snugly. Case revisions, warping/deformation and aging cause…
I have a WowGo 2S Pro which has slightly different dimensions from the Meepo Shuffle, so I designed this little extension piece so that my longboard would stand up straight and balance. The little ramp at the back is stylistic, but also…
Here is a bracket I designed to mount a longboard on the wall. Should be used with a washer-head screw and I recommend mounting into studs or at least drywall anchors. The top bracket only uses one screw so the bracket can slide down on…
There are some beautiful, some fancy and some simple and quick Holders out there. But i have one Problem with tem - they all want you to hang your board vertically. But i want to hang my boards horizontal. After printig it i recognized,…
This is a wall rack for longboard or skateboard decks. This was designed to fit just decks by itself without wheels/trucks. It might fit a complete board with wheels/trucks every other level. The arms attach with M5 screws. There is a…
