Longboard Holder and Wall Mount (Compliant mechanism)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snapping wall mount for e-skates
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 207
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Clip/Snapping holder for electric longboards. All of the holders online had the wheels facing the wall. This does not work for e-skates because you need access to the plugs. Others had the board high up in the air horizontally. This also does not work because when you come back from a ride, you just want a quick and simple solution that is low to the ground and easy to plug in.
I got inspired from another snap print and came up with this. Everything is print-in-place. No additional hardware is required besides wall anchors.
Uses a compliant mechanism remixed from "Customisable Latching Broom Holder" by GregFrost
There are multiple files depending on the width of your board. I also included the Fusion file.
If you want to modify the width in Fusion:
- Edit the offset plane near the end of the edit history.
- Edit the first value. Use this to find it formula: Width-152. For ex. 230-152=78mm