Skateboard and Longboard Handlebar Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts to the trucks/board with standard hardware (or M5) and allows for a 1" PVC handlebar.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
My little one (not the cat) likes the longboard. Now he has something to hold onto. Hole patterns for both old and new and will work with your spare board hardware (but longer) or M5. I printed this out of CC3D 72D because it has some flex and is super strong stuff. 4 perimeters with a .6mm nozzle, 20% gyroid infill (reduces warping). Regular 95a TPU (or stiffer) would probably work as well with a healthy amount of perimeters (2-3mm) and 25% infill. More rigid filaments like ABS and PETG might crack, but who knows...
You could use this to mount anything off the 1" PVC, really... Drink holder or basket for an electric longboard, etc...