Zero Degree Longboard Truck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a baseplate for a zero degree truck for a longboard. This would normally be for a board you want to setup for…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a baseplate for a zero degree truck for a longboard. This would normally be for a board you want to setup for LDP - long distance pumping. To make this work you would need to have this file laser or plasma cut out of steel, then weld a kingpin bolt onto it, then buy a don't trip poppy hanger and get a 3/8 rod end such as:
https://www.amazon.com/Rod-End-Economy-Included-Direct/dp/B07MDHVTPN/
It has mounting holes for both TKP and RKP boards. I think for TKP you would need to put the rod end on the inside of the hanger and outside for RKP (as pictured).
Category: Other