Skateboard/Longboard Wall Hanger Mount - Strong & Slim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low profile wall hangar for skateboards and long boards that is strong, durable and light weight.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 332
- Wydruki
- 2
- Wyświetlenia
- 995
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi there, here is my skateboard/longboard wall hanger that was designed to fit into a tight space behind my apartment door. The model is light-weight, prints relatively fast and is strong where it needs to be.
I would recommend printing this in PETG if available, but I have also included a 25mm wide version for those who only have PLA.
Print Settings: 0.2mm layer height
PETG - 4 walls, 8-10% infill for general print settings. Create two modifiers (see photo or right click part, add a cube modifier (55x20*20mm) placing them as shown in the photo and set infill strength to 25-30% for both. Organic tree supports added as shown.
PLA - Download the 25mm version, add two cube modifiers to the area shown in the photo and set their infill percentage to 30%. (55x25x25mm) I would use 6 walls for maximum strength and 10% infill for the rest with organic tree supports as shown. PLA can be susceptible to creep over time so the stronger the better.
Materials needed - 2x standard drywall/GIB anchors and screws per hangar, mine were pretty overkill. Screws are spaced vertically at 70mm apart and I would eyeball the horizontal to be inside your trucks.