Longboard Skateboard holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My attemp to design a simple and universal Boardholder Vertical AND Horizontal
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are some beautiful, some fancy and some simple and quick Holders out there. But i have one Problem with tem - they all want you to hang your board vertically. But i want to hang my boards horizontal. After printig it i recognized, that a small adjustment (v2) makes it more universal as you can hang up your Board vertically and horizontal and in every angle between.
I also designed some wall protectors - two versions one to glue and one to screw. I highly recommend to use them. As they protect your wall from getting dirty they will also support the angle of the board to stay on the holder.
Print the holder with at least 4 better 5 walls/perimeters, 5 top and bottom surfaces and min. 30% infill (grid) for stability!
Wall protectors can have 2 walls/perimeters and 15% infill as they don't need any structural strengh
No support needed and the holes are made for 4mm screws