1 / 8
3S LiPo Battery Spacer Kit for Traxxas Rustler 2WD Trucks — image 1
1 / 8

3S LiPo Battery Spacer Kit for Traxxas Rustler 2WD Trucks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is another wedge and strap for a 3S LiPo battery like this one here, but this one is for batteries that are too…

Rating
0 / 5
Likes
12
Downloads
93
Makes
0
Views
869
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is another wedge and strap for a 3S LiPo battery like this one here, but this one is for batteries that are too long for the tray, not too thick like the previous one I made. I thought I had all the dimensions correct, but the length did not include the wires that protruded out the end of the pack, and I did not want to bend them that much, so I made another wedge and strap to hold my 3S batteries.

The specific battery I have is the GENS Ace B-45C-3300-3S1P

I learned from my previous one and made it so it can be flipped over and use for batteries that fit the tray properly so you don't have to carry around the flat strap. All you have to do is align the pin holes int he hex posts to line up with the slot and you are good to go. I do recommend putting a string or something through the pin loop to get it out of the post a bit easier. I carry a Leatherman multi-tool, so it is a non-issue for me.

I print them at 100% infill just to make them strong enough to survive the inevitable truck-meet-curb accident that happens in my cul-de-sac now and again.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

100%

Filament: Hatchbox / AMZ3D PLA Blue

Category: R/C Vehicles

Tags