LayersFactory
Report model
1 / 7
Window dehumidifier — image 1
1 / 7

Window dehumidifier

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial
DetailsMakes & commentsRemixesCollectionsRelated

Story: We have recently moved into a new apartment. It is a nice flat, but pretty old. The bedroom and living room have two rows of windows each. During the winter months a lot of humidity accumulates between those windows. In order to prevent mold we try to reduce the humidity with dehumidifiers. However, conventional ones do not fit between the windows. Therefore I have used the measurements of the granule blocks of a common dehumidifier we had lying around.

I have used PETG for a UV-resistance (because they are located at the window) but you can also use PLA and ASA filaments:

PLA

SUNLU PLA PlusAmazon
Amazon BasicsAmazon
GEEETECH Filament PLAAmazon
ELEGOO PLA+Amazon
eSUN PLA+Amazon
JAYO PLA+Amazon
  

PETG

eSUN PETG FilamentAmazon
OVERTURE PETG FilamentAmazon
ERYONE PETG FilamentAmazon
SUNLU PETG FilamentAmazon
Polymaker PolyLite PETGAmazon
FormFutura - ReForm - rPETAmazon
extrudr® XPETGAmazon
TECBEARS PETGAmazon
GIANTARM PETGAmazon
Elegoo Rapid PETGAmazon
  

ASA

extrudr® DuraPro ASAAmazon
Polymaker PolyLite ASAAmazon
AzureFilm 3D BlackAmazon
eSun ASAAmazon

Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.

If you print one, please post a make! If you encounter any issues, post a comment. Thanks!

Tags

windowhumiditymolddehumidifier