Counting matching models…
For some reason my drain hose connection on my dehumidifier is not threaded for a garden hose. It is a 3/4" male NPT. I tried loading it up with teflon tape and it worked until something bumped it. I couldn't find an adapter that wasn't…
This is a filament drybox for a single spool based on a cereal box. It does not require any desiccant but leverages a Rosahl electric dehumidifier membrane. The original cover plug of the cereal box is replaced by a 3D printed plug which…
PLA-ból nyomtattam 0,2 szélességben, 2 falat.
Please see my updated version of the Rosahl M-1J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Housing to install a Solid State Dehumidifier into an AMS. I highly recommend either hard wiring the MDL-3 or using an XT-60 plug or similar instead of the barrel plug I showed in the video to reduce voltage drop.
Nice little ammo box with dovetail lid for your slingshot ammunition. If you use the additional INLAY with perforated bottom surface you can place a pack of silica (80x40x10mm max.) underneath for dehumidifying your slingshot balls if…
This is the new mounting cover/case for a Rosahl MDL-3 electric dehumidifer membrane as alternative to the original ( https://www.printables.com/model/932682-mounting-cover-for-rosahl-mdl-3-electric-dehumidif ) and uses an off-the-shelf…
Please see my updated version of the Rosahl M-3M1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Silica gel holder, round 50 mm, that fits in the reel of the filament. to keep the watervapor out of your filament. The Silica Gel (2-4 mm size) is a color changing type, so you should know when to regenerate it. The STL files Silica…
This box is designed as dehumidifier for car to prevent foggy windows during cold nights. Just fill it with rice or silica gel and put it on deck near the front window. I also attached lid without cutouts, so you can add logo on the top…
I use it in the filament drier, printer enclosure, etc. The basket can be printed from PLA, PLA+, PETG, ASA, ABS, etc. I prefer to use PETG, because of the less odours than ASA/ABS and the better temperature resistance than PLA. No…
The original design of this plastic adapter that connects the dehumidifier to a drain hose is somewhat fragile and subject to wearing out over time. Newer versions of this part are more sturdy, but don't fit older models; and replacement…
This is a mounting cover/frame for a Rosahl M-1J1R electric dehumidifer membrane which can be used for a filament drybox of around 20-30l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…
This is a mounting cover/frame for a Rosahl M-3M1R electric dehumidifer membrane which can be used for a filament drybox of around 50-70l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…
Please see my updated version of the Rosahl M-3J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Summary Introducing our DIY filament dryer box, the ultimate solution for 3D printing enthusiasts. This innovative design features precise temperature control, ensuring optimal filament drying conditions. With its automatic start and stop…
I took the original model of this mainline cap and scaled it to fit a 3.5" basement drain. I only needed about half as many threads as the original model so I removed some. I also added a hose connector on the top because I needed a way…
After having some mold issues in my flat, I created this little project. It consists of different compartments Bottom container with a separate water bucket and optional swimmer Chemical module with a sieve, holding e.g., Calciumcloride…
This is an updated version of the M-3J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…
See our latest addition to Rosahl membrane mounting covers with a thread-mount cover for the M-3M1R membrane which simplifies mounting quite a lot to just drill one large hole.. This here is an updated version of the M-3M1R outside…
This is the FilaBilly Dehumidifier. It's a compact smart device that exracts water from the air. It's meant to be used in an airtight cabinet to create a low humidity environment for 3D printer filament. This is the first part of a larger…
This is more a demonstration. It will have to be modified to fit whatever components you might use as they are easily available. It's simply a box and simple ducting, hot air up, cold down. Purpose of the box is so there is no air leakage…
This is an updated version of the M-2J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…
See original for description. @ustejski made a very nice design that works well. However, I purchased the Cosori dehydrator because it was low cost and had good reviews, and had to modify the original model's shell and adapt to the center…
According to the documentation (manual can be found at amigclima.com), the Amig dehumidifier should have a 19mm drain hose connection for continuous operation. But in fact, the drain connection is a strange screw thread between 16 and…
Details: Silica gel is quite expensive with about 20-30 bucks per kilo. There are even versions that can change color that contain toxic chemicals like cobalt chloride and it's not as easily available as car and home dehumidifier. So I…
Deutsche Version unten. ---------------------------- Total parts costs (depending on what you already have at home) will be somewhat between 10 and 25€, assuming you have the coolers. Currently they cost around 15€ on ebay. Practical…
Turbine for meaco dd8l junior desiccant dehumidifier PETG layer height: 0.12 mm line width: 0.42 mm Walls: 4
I keep one of those small plug-in-to-recharge dehumidifiers inside my filament storage box, and another inside the active filament chamber above my 3d printer. But my filament chamber (a clear plastic box above my printer) doesn't have…
Update I made a new mounting cover for the Rosahl MDL-3 membrane, which uses a standard gasket instead of the rubber o-ring and is simpler to assemble. Also the gasket frame fully covers the interior of the case, hence is more protective.…
Bracket to hold my reusable Eva Dry dehumidifier in my filament storage. Print 2 and use M4 bolts to attach (I used M4 x 12) This is the model I made this for…
This is an updated version of the M-1J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…
Wall Mount Brackets for the Meaco DD8L Junior Dehumidifier To fit do the following; Remove the 4 screws from the floor mount and remove it. Attach the bottom brackets to the bottom of the Dehumidifier using the original screws. Hold up to…
Designed for 3 perimeters print with 0.4 mm nozzle. I tested it with water and it didn't leak out, but you better check too. Tolerances might be tight. I have a V2 in mind with improved tolerances and curves to print a bit faster. If this…
This is a mounting cover/frame for a Rosahl M-3J1R electric dehumidifer membrane which can be used for a filament drybox of around 50-70l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…
Based on the EVA-Dry E333 Stand by DaJMasta https://www.thingiverse.com/thing:3747734. This a perfect stand for the EVA-DRY E333 Dehumidifier, works perfect for your dry box or enclosure. I'm using it in my dry box with some double-sided…
I made this for using the Torrbollen bags in a case that fits my usecase and cabinet space. I designed it to fit Torrbollen 450g bags with water dripping down into the container, leaving the bag well exposed to the surrounding air on the…
This 3D-printed filament dehumidifier is a practical and cost-effective alternative to commercial boxes, which are often expensive and bulky, used to keep filament spools dry. With this DIY project, you can save both money and space. The…
Story: We have recently moved into a new apartment. It is a nice flat, but pretty old. The bedroom and living room have two rows of windows each. During the winter months a lot of humidity accumulates between those windows. In order to…
This design is a container for a 250g bag of dehumidifier (Calcium Chloride or similar). I've made the model for quick printing, and it takes approximately 1 hour. Material Recommendations: tested with PLA and PTEG, both are fine.…
Upon request by users I made 3D-printable spare gaskets for all Rosahl M-Series dehumidifier membranes. Those include M-1J1R, M-2J1R, M-3M1R, M-3J1R, M-5J1R, M-7J1R and M-10J1R membranes. The models have the same shape as the original…
Needed to fix a dehumidifier, part wasn't available. This model is solid so print it with support, very low infill, lots of top/bottom layers and perimeters. I suggest in ABS or PETG, not PLA which would be too brittle. My picture is of a…
I bought this humidifier form amazon Twin Pack Cordless Rechargeable... https://www.amazon.co.uk/dp/B00TE45IHI?ref=ppx_p this is a container for silica beads so this drier will work with it Must print in high temp abs or better
Please see my updated version of the Rosahl M-2J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Base for dehumitifier so the silica gel pack is 1cm above the surface. Size 15cm x 8cm x 1cm Print it with no top and no bottom layers so you can use the infill as air-passage. Update: V2 is bigger and more stable (16cm x 10cm x 1cm)
This is a replacement drip catcher for a dehumidifer so the collected water everdrains out of the dehumidifer rather than filling up the receptacle and shutting off. I use it on my boat with the dehumidifier placed in the sink. It works…
The include project is for 41mm bottle cap diameters and 13mm tube diameter. The provided Freecad sourse file can be modified for other diameters. Print settings: ZERO top layers 0.3 layer height 3 perimeters
A replacement part for the fan in Delonghi dehumidifiers. The original one shattered due to it's age. This is a replacement part that is modelled after the original. After printing you might need to balance it, even though the RPM's are…
Basket designed for the PetMate No Spill Bowl https://www.amazon.com/dp/B00M1UWJ5G but can be customized to fit any desired vessel. You can buy a 25-lb pail of Calcium Chloride from McMaster-Carr for about $43…
A compact, basket-style dehumidifier designed to fit inside 3D printing spools. Weighs 17g and prints quickly. Includes two versions: standard fit and a looser alternative
This 3D printed model serves as a simple passive air dehumidifier. It is designed for use with standard absorption bags
This is an new/alternative mounting cover for the Rosahl M-3M1R membrane and USB-C power supply onto a filament dry storagebox, BambuLab AMS or Creality CFS or other multi-material-system or generic storage boxes for various applications.…
I wanted a much simpler option for removing humidity from my Sunlu Dehumidifier than what was currently out there. I opted to use a USB 40x10 fan, with speed control. Something like…
Stačí nasypat kočkolit a vlhkost se strácí - Just insert the cat litter and the moisture disappears
Needed a way to mount the Hornady Rechargeable Dehumidifier 95900 to the inside of a gun cabinet. Print in PETG or something durable. Recommended layer height of .15mm to ensure that there are two layers in between the metal and the…
The inspiration was an aluminium vacuum cleaner tube I picked up from a bin one day… I wanted a reel holder and dehumidifier but I have a few reels of 2kg recycled filament, and most will not fit that large reel. Once I found the big…
My Midea dehumidifier was occupying a corner of my living room that I wanted to use for a plant. Hence I made a top shelf that fits onto the upper lip without restricting the airflow and allows a top plate to be inserted for placing other…
I got sick of my cat, Zeus, sitting on the dehumidifier and changing the settings. The Midea Cube (we have two) doesn't have a way to lockout the button controls. This cover goes over all of the control buttons, while still allowing…
A quick clip to help manage high pressure 3/8" ID vinyl hose. I got tired of my condensation pump hose kinking and being hard to manage so I made these clips. The are 5/8" in size. They fit this type of hose: https://amzn.to/3OpgRvJ…
The drain connection is a strange screw thread between 16 and 17mm. After about 10 attempts, I found the correct thread and designed this replacement drain cap. There are two pieces: the cap itself can be printed in just about anything (I…
This is a beta test of revised dimensions to fit this new model of dehydrator. My original OpenSCAD files were hard to follow, so I cleaned up the Customizer and added some descriptions. I do not have this model, so if you do and can…
I recommend printing the "Bottom" part at 100% infill.
Hey team, I purchased a dehumidifier rod from eBay (USA made item - Dampp Chaser® branded). The rod itself feels high quality and it functions well, however the standard plastic mounts felt pretty cheap and if placed on the floor of the…
Can be printed with common settings, just use a little organic supports for the overhangs. The AIR MAX dehumidifier is sold by BISON, but once unboxed it doesn't say BISON anywhere on it. Example: https://www.bison.net/en/product.6313252…
My MK3S was getting an ‘under temp’ error in a cold garage in the winter. Adding a safe dehumidifier helped keep the temp above the error threshold of about 50°F. The dehumidifier is essentially a stick-shaped weak electric heater. These…
A quick clip to help manage condensation pump dehumidifier vinyl hose. It fit 3/8" ID vinyl hose, it's about 19/32 OD. They fit this type of hose: https://amzn.to/3OpgRvJ (Amazon aff) My furnace used 1 ¼" iron pipe for the gas feed as a…
Container for silica-gel (approximately 300g) It can be placed in a car can-holder. It can be fitted with a monitoring humidity (and temperature) indicator. [the indicator displays data for silica gel] 3 possible caps : Classic With caddy…
This adapter allowed the connection of a standard 150mm flex hose to the output of an Easy Home LE2014 dehumidifier unit so that you can direct the dry air anywhere you need to dry out damp spots, linen cupboards etc. I've made the…
I bought this humidifier form amazon Twin Pack Cordless Rechargeable... https://www.amazon.co.uk/dp/B00TE45IHI?ref=ppx_p So i wanted to dry the 2 humidifiers at once so i designed this Print in a high temp filament only abs or better
This is a simple stand designed to collect any water that may leak out of a small dehumidifier. Print instructions Mini Dehumidifier Stand - Body Rafts: No Supports: No Layer Height: 0.2mm - .4mm Nozzle 0.3mm - .6mm Nozzle Infill: 15-20%…
My MK3S was getting an ‘under temp’ error in a cold garage in the winter. Adding a safe dehumidifier helped keep the temp above the error threshold of about 50°F. The dehumidifier is essentially a stick-shaped weak electric heater. These…
Are you tired of your dehumidifier hose flopping around and soaking your basement? Do you have a PVC drain pipe in your home? If you answered yes to both of these then this print may be just what you need to keep your socks dry. I used…
This is probably a niche design, but I thought there may be others out there with a similar dilemma, so I thought I'd share my design for a salt and pepper mill dehumidifier. I own two of the original design Peugeot salt and pepper mills…
very quick dehumidifier exhaust director, that i made so the exhaust on my dehumidifier would go up rather than down
-------------------- Aliexpressで購入したポータブル除湿機をイノマタ化学の乾物ストッカー6.0の蓋に固定するためのパーツです。 蓋に2箇所穴を開ける必要があります。 [BOM] M3 * 6mm ネジ M3 ナット M3 ワッシャー(任意) ポータブル除湿機 https://ja.aliexpress.com/item/1005005943599388.html -------------------- 【Translate by…
Not sure about the model etc. Hopefully it sort off looks the same as yours or you might be able to change it.
Part of DIY Dry-Cure system using Pro-breeze dehumidifier, Kooltron wine cooler and inkbird humidity controller. https://www.rollitup.org/t/thermoelectric-wine-cooler-drying-and-curing-diy.1088980/
I needed a new way to dry my filaments because using the oven was way too much for just one spool, so I created this adapter which mount on the top of a small dehumidifier that I had already at home. I also included a hole to insert a…
Basket for dehumidifier "HumiStop". Used instead original pockets. You can put granular material absorbin moisture. Printed with PETG. Used 2-3 walls. Infill 20%. EDIT: Added 2nd version which is a bit taller.
Print list: Main Body x1 Gel Release Lid x1 Gel Top x1 Spool Roller Support Pin x2 Spool Roller x2 Rear Locking Bar x1 Gel Funnel x1 (if wanted) Settings will vary by printer, but with my AD5M I did 20% gyroid infill with .2mm layers.…
Button cover that keeps pets from constantly pressing buttons and changing settings. I printed in clear 72D TPU. You can use any filament you like. I used hot glue to attach, but you can use whatever adhesive you have.
This is a small sink spout for a 1/2 in or 12.7 mm outside diameter hose (hole is tapered from 16 mm to 12 mm). I use it with a tabletop dehumidifier to keep the bathroom dry. Attach to sink with some interior construction adhesive or…
I have a Keystone dehumidifier with an overflow outlet that one can hook a hose up to. There is a plug that normally closes off the hole; one of our pets got ahold of the plug and chewed it up to oblivion. This plug can be printed in a…
I am waiting for someone to upload their model so I can correctly reference this as a Remix So I had a couple of Celebration's christmas chocolate tubs, one of the older, taller ones (that can hold a spool) and one of the shorter newer…
This dehumidifier box is designed for use between furniture and walls with limited space. It is compatible with commercially available 900g moisture absorber refills (I buy them at the Action store). To print the bottom component, set:…
Before anything I would like to mention that I uploaded also the STEP files so any of you can make modifications of my desing based on the parts you have on hand or the ones you would like to use. The list of things I used for this…
Uses the plug circled in red to connect to the m-2j1r. The power supply can output 3v 3amps which is the requirement to operate from rosahl. You can find it here: https://www.amazon.com/dp/B07N18XN84?ref=ppx_yo2ov_dt_b_fed_asin_title…
Adapter for Novita ND60 dehumidifier to hose Connect the dehumidifier directly to a water outlet Printed with 95A TPU. TPU attachment replaces original silicon/rubber dehumidifier outlet cover.
Works in PETG but better in PA or TPU 95A
Model should be printed on the side just to overcome the layer adhesion issue. I have printed mine from PA6GF with 4 walls and 40% infill and it does bend less then the original one. To change the handle you need to partially disassemble…
Use in conjunction with Use "Abdeckung_Innen_Modifizierer" as a modifier as shown in the picture
This is an extender for the Coer One Drybox with a solid-state dehumidifier addition. This allows the original spool holder to be used and, therefore, allows larger spools. Additionally, the RS2 solid-state dehumidifier (…
Replaces easily breaking bucket sensor with a beefy one. PETG recommended. See pictures for compatible model.
If you live in a swamp where the humidity frequently gets up to 70%, then you might know the struggle of keeping your filament dry. So I set out to turn an old, no longer working mini fridge into a filament storage chamber. Putting some…
Uses the plug circled in red to connect to the m-2j1r. The power supply can output 3v 3amps which is the requirement to operate from rosahl. You can find it here: https://www.amazon.com/dp/B07N18XN84?ref=ppx_yo2ov_dt_b_fed_asin_title…
I have a Keystone dehumidifier with an overflow outlet that one can hook a hose up to. There is a plug that normally closes off the hole; one of our pets got ahold of the plug and chewed it up to oblivion. This plug can be printed in a…
This is an extender for the Coer One Drybox with a solid-state dehumidifier addition. This allows the original spool holder to be used and, therefore, allows larger spools. Additionally, the RS2 solid-state dehumidifier (…
Please see my updated version of the Rosahl M-3M1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Model Dehumidifier box for granule bags of Calciumchlorid-Dihydrat. Size about 252 to 142 mm. Printing instructions I printed the box with a nozzle of 0.8 mm but 0.4 will also work. Use Arachne wall generator. Use PETG With 0.8 nozzle 2…
I've bought Trotec dehumidifier and I needed to change a filter. The thing is like 30 euros so I made this filter adapter that is using VW Golf 7 cabin air filter that is around 10 euros :)
