Dehumidifier float compatible with Frigidaire part 5303306080
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed to fix a dehumidifier, part wasn't available. This model is solid so print it with support, very low infill,…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Needed to fix a dehumidifier, part wasn't available. This model is solid so print it with support, very low infill, lots of top/bottom layers and perimeters. I suggest in ABS or PETG, not PLA which would be too brittle.
My picture is of a test version I printed in resin on a SLA printer, but the final one will be in ABS.
Print Settings
Printer:
Sidewinder X1
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
5
Filament:
Any ABS
Notes:
4 or 5 perimeters and about as many top/bottom layers, as low infill as you can get away with, requires supports. Suggest ABS or PETG.
Category: Parts