Dehumidifier float compatible with Frigidaire part 5303306080
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed to fix a dehumidifier, part wasn't available. This model is solid so print it with support, very low infill,…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed to fix a dehumidifier, part wasn't available. This model is solid so print it with support, very low infill, lots of top/bottom layers and perimeters. I suggest in ABS or PETG, not PLA which would be too brittle.
My picture is of a test version I printed in resin on a SLA printer, but the final one will be in ABS.
Print Settings
Printer:
Sidewinder X1
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
5
Filament:
Any ABS
Notes:
4 or 5 perimeters and about as many top/bottom layers, as low infill as you can get away with, requires supports. Suggest ABS or PETG.
Category: Parts