Keystone dehumidifier plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you have lost or damaged your drainage plug for your Keystone dehumidifier, this may help.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a Keystone dehumidifier with an overflow outlet that one can hook a hose up to. There is a plug that normally closes off the hole; one of our pets got ahold of the plug and chewed it up to oblivion.
This plug can be printed in a TPU or TPE material to replace a damaged or lost plug. I have included a photo of my model of dehumidifier, though it is quite possible it will work for many other models of Keystone dehumidifiers.
I printed my plug in 82A Recreus Filaflex, but I would be willing to bet it might work with a common 95A TPU. It doesn't take much material, so it's worth a try.
Standard TPU settings (temperature & speed) apply. You might consider a lower infill of 10%-15% rectilinear with an extra top layer to ensure a clean, water-tight closure.