Counting matching models…
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor. Print instructions You can place five pieces of this drybox on the top of the Prusa Printer Enclosure V2. Can be used as a standalone spool holder for Original…
Simple 2 part model with a mating lip. Print both parts flat, no supports required. Please make sure to seal the print with a reptile safe sealant, and allow time for any off-gassing that may occur to protect your pet! I recommend Minwax…
Small stand for Bambu Lab AMS unit to hold a hygrometer. The Hygrometer was purchased off Amazon and was a "JEDEW mini hygrometer"
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
This is a simple humidity sensor mount for your filament drybox. I've created this to fit the IKEA samla boxes, but should work fine with any transparant storage box. It is designed around those cheap circular LCD temperature / humidity…
Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…
Einfacher Druck zur Befestigung des Feuchtigkeitsmessers am Anycubic ACE Pro. Als Feuchtigkeitsmesser habe ich diesen von Alliexpress verwendet: Link Neu : Passend dazu habe ich noch einen Behälter für Silica Gel entwickelt, der ebenfalls…
After some research, I came to the conclusion that the best and cost effective way to keep filament dry , is to use a cereal box. These are cheap and provide a perfect seal from the elements. This build adds a Hygrometer and Thermometer…
I wanted to get a notification, when I needed to change silica. I remixed @Thomas_63847 model to fit my Aqara Sensor. Printet with tree support.
I like the idea of varstef75's sensor holder, however the curved hanger is unnecessary thick and the sensor frame is a bit too small. So, I redesigned it from scratch, using half of this holder instead, which should fit the sensor easier…
Mount for a temperature or humidity sensor on top of the Prusa MK3S printer. Sensor:…
Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS. This is a second version of this one , I added caps & humidity sensor support. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
I optimized this file " https://www.prusaprinters.org/prints/4583-drybox-for-prusa-printer-enclosure-v2-with-humidit " so that you can print them in two different colours. :)
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
I remixed a modell for Xiaomi Mi Temperature and Humidity Monitor 2. And I designed a specific funnel for easier filling. HF!
I decide to design an indepedant holder for rectangular sensor, to allow use on different position : works on desk works inside an enclosure works on to of an enclosure I defined wich angle allow this several usage I propose 2 design :…
This is the second design of my little home automation sensor box. I've flashed it with ESPHome making it really easy to use in Home Assistant. Powered via the USB port on the Wemos D1.. doesn't work off a battery, this wasn't my…
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the rabbit's feet.
I've had a cheap water atomising module for a long time that has not been used for any purpose yet, so I decided to design a DIY humidifier set. It can be used both with and without a PET bottle. The model is pretty small (only 11 x 6.5 x…
I made a remix of this excellent radiation shield to use Aubess Tuya Zigbee Temperature Humidity Sensor. These sensors are very popular and available, so I wanted to try them outdoor. Buy here Size is compatible with the original design…
I have bougtht several round Temperature and Humidity Meters to put them inside the filament spool holders. I have used one in my 3D printer chamber for temperature and humidity indication. These meeters are tiny and round. I could have…
Hello Everyone This is my second project for the Xiaomi temperature and humidity sensor. The first design is to change the color of the sensor housing for use in the Bambu Lab AMS System or the second version to change the color of the…
I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…
Summary A case for a temperature and humidity sensor powered by an Arduino uno board. The case fits: an Arduino uno a small breadboard a 16x2 LCD display a DHT11 temperature and humidity sensor The parts are locked in place by melting the…
Designed for easy printing and usability, not for looks. I don't mind having things that are not organic shaped in my terrariums, but also didn't want to use a plastic tupperware with a hole cut into it, so I came up with this basic yet…
The original design is of course, required for every ECC. I wanted to add a slot to install an inexpensive Humidity/Temp sensor that I could see from my desk. Simply used Fusion360 to cut a tiered slot into the original model's Front Left…
This is a remix of Ondřej Stříteský's "Standalone Drybox - with humidity sensor". This version only contains the bottom without the hole for the humidity sensor. Get the rest from Ondřej's original. You can place five pieces of this…
Humidifying shelter and watering area for reptiles. At low speeds you can print without supports. There are holes for installing magnets. I also highly recommend coating the inside of the shelter with epoxy, this will make cleaning easier…
Fixing the gap between the two components; now they fit tight together; Taking out the screw hole and replaced with a pin; New Air vents pattern This remix is used in my project here: https://www.thingiverse.com/thing:4352377 Enjoy!…
Portable humidor for rolling tobacco (may be suitable for cigars). you will want to support the roof of the drawer space and either support the top of the insert or trust bridging to work out! best printed 0.2mm layer height, 3 perimeters.
Simple wall mount for a Govee H5179 sensor. Flat back with screw hole for a fastener or use with a command strip or some double sided tape.
A stand to hold one of the cheap temperature-humidity-meter combinations available on amazon and used all around the 3D printing eco-sphere. Print instructions I printed the stand in PET since I had enough of it lying around, but it is a…
A minimalistic stand for mounting a standard hygrometer that is widely available in online stores such as Amazon. The sensor clicks in place. See the image regarding the sensor dimensions to make sure that your sensor will fit the stand…
Just a simple holder for those cheap panel mount hygrometers (widely available from ebay/amazon/aliexpress/etc). Print it face down, no supports needed (see .3mf).
There are a few humidity/temperature gauge holders on Printables but I found they were difficult to see, being either obscured by the heat bed, or by the extruder when printing. I made this one which is easy to see from the front door and…
A remake of the included mount for the SNZB-02D in case you want to make extras, and another mount for use on dry boxes. The other mount can also be used on windows, or any time you want to mount the sensor on the interior of something,…
A case for Arudino DHT11 temperature and humidity sensor. The case is printed in two parts. No glue or screws needed. The chassi may have to be cleaned from any residual before inserting the cover. The case can be mounted with…
Vent cover for AD5M/AD5X with integrated slot for temperature/humidity sensors. Also available without the hole for the sensor. Link to the sensor I used: https://www.amazon.com/dp/B0DXCSXT9X?th=1
This remix adds a mounting plate for a temperature humidity sensor to EnXLosure_Top_Door_Stop.stl , the Top Door Stop on the EnXLosure. You can use the Prusa Temperature Sensor https://www.prusa3d.com/product/temperature-sensor/ that…
Sunlu Filadryer Humidity Control It seems the Sulnu is good for drying filament, but can sometimes cause humidity to condense inside the enclosure. This item allows packets of silica gel crystals to be placed inside the filament roll.…
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…
Temperature and humidity display holder with integrated filament guide/bowden coupler it uses the screws that is holding the heating element, so be sure to use PETG/ABS or some other high temp stuff no drilling is required This is an…
Basic stand for the common temp sensor for enclosures, designed for minimal amount of filament (9,4g). Printed on the side w/ supports, ** May not need supports at all, refer to comment section and makes.
For some reason my drain hose connection on my dehumidifier is not threaded for a garden hose. It is a 3/4" male NPT. I tried loading it up with teflon tape and it worked until something bumped it. I couldn't find an adapter that wasn't…
This is a filament drybox for a single spool based on a cereal box. It does not require any desiccant but leverages a Rosahl electric dehumidifier membrane. The original cover plug of the cereal box is replaced by a 3D printed plug which…
Keep organized your cigars in your humidor using this stackable Cigars rack
~3deg and ~5deg open lid variations. The 3deg allows the temp to get a few degrees hotter in my environment. My humidity reader always stays around 10% maximum with this mod. Without it, the humidity was always 20% minimum inside the…
Compact Case for use with the D1 Mini and a BME280 Temperature, Humidity, and Pressure Sensor. I designed this and use it for reading temperature and humidity in various locations around the house. I use that information for Home…
Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica Ich habe mir eine Temperatur und Luftfeuchteanzeige für den Sunlu /JAYO Dryer S1 erstellt (Inspiriert durch andere Thingiverse Konstruktionen) Benötigt wird eine M6 Mutter + M6…
A stand for the widely available temperature and humidity monitors. No supports required, print face down. The monitor snaps in with no tools.
Badminton Humidifier. Opens with a twist cap, and provides a humid environment to extend the life of shuttles. First insertion will likely be a bit rough, however after a couple twists the layers will smooth out and it should fit smoothly…
I have printed the parts using PETG filament as this was the only filament in blank white color I had in stock. Unfortunately the filament has a very poor quality. The filament appears to have very poor diameter accuracy. For this reason…
I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…
These mounts are designed to fit standard rectangular hygrometers/humidity sensors. The rectangular opening measures 45.5mm x 26.5mm, and is designed for the hygrometer to clip into. The rear of the mount is completely open to allow for…
A case for a humidity sensor system consisting of a DHT22 sensor, a Wemos D1 Mini, a 18650 battery holder and a battery charging module. Features: Sensor is thermally isolated from the rest of the electronics lid holds tight by press fit…
A basic guitar humidifier, print the body upside down as well as the lid upside down, no supports required. I did adjust the tabs to suit clamping force desired with a heat gun after printing. More free AzJake projects:…
Super simple, quick to print holder for a temp/humidity sensor in a drybox. Holds it so it can be read from the outside, mounts with double sided tape so you don't have to drill or use any hardware, and it's easy to swap in a new one if…
This holds your hygrometer and thermometer nicely and it clips onto your MK4 frame. I've used this on my MK3S+ printers with great success and modified the file to fit my MK4. It also looks cool if you match it to your printed printer…
This is a model I designed a long time ago to hold the temp/humidity sensor for my filament cabinet in my Lack enclosure. It's a quick print, and can be used to mount the sensor on any side. I ended up hanging it upside down from the top…
Simple hygromneter (humidity sensor) stand for the Round type. Originally made for Dryboxes but I thought they might come in handy in other scenarios too. The slim version likes to tip over, its best for when glueing them somewhere.
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required.
This fits the new Anycubic Ace Pro that comes with the Anycubic Kobra S1 Combo. The temperature and humidity sensor used as well as the silica gel packets are listed below. Temp/Humidity Sensor: https://tinyurl.com/bp8r6437 Silica Gel…
My Smarthome Roomsensor Parts: Wemos D1 mini BME 280 BH1750 M3x6mm Screw I Use Home Assistant as Server and ESPHome to control the Sensor I send the Wemos into deepsleep and wake it every 5min for 30sec (dont forget to connect D0 and RST)…
This is a stand conversion for a EEEkit Hygrometer (Amazon link, non-affiliate). You can use this to conveniently transform the hygrometer into one that can sit on a shelf You can easily snap the hygrometer into the "outer" casing; it'll…
Weather station / housing for TH08 temperature and humidity sensor, with dimensions: 70 x 25 x 21mm. Wall mount and blinds recommended to print vertically without supports. Top cover printed horizontally without supports, infill can be…
The Sonoff SNZB-02 sensor is a simple and cheap ZigBee temperature and humidity sensor. The default mounting option is using a sticker to attach it to the wall. However, walls tend to be colder than the room they are in due to thermal…
Mount for common round hygrometers typically used by filament dry boxes. Intended to be mounted with 2 M3 screws to 2020 extrusion. I use this to monitor temperature inside my 3d printer enclosure.
Please see my updated version of the Rosahl M-1J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
The print is very easy to make. To supports are needed. Place the hole on the plate. You can use https://www.amazon.de/dp/B07JG9QZ2B?ref=ppx_yo2ov_dt_b_product_details&th=1 as sensor. ######################################### Der Druck…
*Amazon links below are affiliate and i may make a small commision for purchases using these links. Updated 27Oct2025 - Added a second option for the cigar tray to put 6 smaller diameter cigars instead of the 4 larger ones. Updated…
I modified the original model to increase the size so it would accommodate larger zigbee temperature and humidity sensors like the ones from Tuya and Sonoff. I have also added a column off the back of it that includes a mounting hole so…
This is a holder to be attached to the empty HSW inserts, to insert the often used round hygrometers. With the slots in the back and the offset from the wall there is no problem in reading temperature and humidity. The hygrometer slides…
This is a replacement nozzle for the AquaOasis Cool Mist Humidifier. The original would plug with water causing the unit to overheat. Prusament PETG .15 or .20 20% Infill
Hello Everyone I designed a housing for Xiaomi temperature and humidity sensor which I use in my AMS System. The original version only comes in white. I didn't want it to be so visible after assembly because of the white color. Therefore,…
A simple outdoor housing for the Aqara Temperature and Humidity Sensor (Zigbee), based on the case from Andos . The case fulfills its purpose and protects the sensor from wind, rain and direct sunlight. It is also relatively compact, not…
a simple holder have fun
This is specifically designed to hold the round “Thlevel” humidity and temperature sensor shown in the pictures. If you're here, you probably have some. If not, you can find them easily on Amazon. Print it face down. No supports needed.…
Simple angled stand (65 degrees) for Fahrenheit Humidity/Temp LCD Meter. Prints face down, requires no support. Update: added 45, 50, 55, 60 degree angle options to improve LCD visibility
Simple bracket for humidity sensor from Aliexpress. I know that this sensor is made for drilled hole, but I don't want to drill hole to my Ikea drybox. The bracket could be easily glued to the box by double-sided tape.…
Easy to print two parts Cigar Humidifier. Has slots for 8 magnets/6x3mm neodym/ for easy lid and base snap. Absolutely enough for 50 Cigars. Dimensions WDH: 12x6x2.5cm Printed with PETG 0.4mm on 0.2 speed profile. New version is here
Simple holder for a humidity sensor. You can install the sensor from above. As there are two versions of the sensor I've made two versions of the holder. The small holder is for sensors with 6 holes in the back. The large holder is for…
Housing to install a Solid State Dehumidifier into an AMS. I highly recommend either hard wiring the MDL-3 or using an XT-60 plug or similar instead of the barrel plug I showed in the video to reduce voltage drop.
hello!!! i made this ant nest, it is totally not a carbon copy of esthetic ants mesh nest :sob: pls support esthetic ants visit his shop and take a lookie Hydrate the nest every 3 days for species like lasius, and hydrate every week for…
Nice little ammo box with dovetail lid for your slingshot ammunition. If you use the additional INLAY with perforated bottom surface you can place a pack of silica (80x40x10mm max.) underneath for dehumidifying your slingshot balls if…
Vent cover for AD5M/AD5X with integrated slot for temperature/humidity sensors. Also available without the hole for the sensor. Link to the sensor I used: https://www.amazon.com/dp/B0DXCSXT9X?th=1
Changes from the original: - Shorter, the display is now in the curve of the lid - Display fits deeper into the print The screw from the original should still work. Mine fits right over the small tube that came with the box which is a…
This stand was specifically made to hold these meters https://www.amazon.com/gp/product/B07GNMKYCZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I know the design could have used less material, but I like them. Maybe someone else will…
So I made this box that can hold in place an Arduino Uno, a breadboard, an LCD (16x2) and there is also room for a dht11 sensor on both sides to make it more convenient to assemble. The box was also designed keeping in mind room for…
Wall mount for the ThirdReality Zigbee Temperature and Humidity sensor found on Amazon ( https://www.amazon.com/dp/B0BF9W3WMK ). I made this because the sensor doesn't have any native way to mount to a wall and I couldn't find any…
This is the new mounting cover/case for a Rosahl MDL-3 electric dehumidifer membrane as alternative to the original ( https://www.printables.com/model/932682-mounting-cover-for-rosahl-mdl-3-electric-dehumidif ) and uses an off-the-shelf…
I use these sensors (https://www.amazon.com/gp/product/B07D37FKGY/) in my printer enclosure and in my bathrooms to tell when someone is showering to kick on the exhaust fan to remove the steam (and turn the fan off after it's clear). I…
Please see my updated version of the Rosahl M-3M1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Inspired by the Drybox humidity sensor mount by RobMagus (link is under original model) I created a mount which is better fitting for metric nuts and bolts. The mount holds a cheap LCD temperature / humidity sensor and can be attached to…
Silica gel holder, round 50 mm, that fits in the reel of the filament. to keep the watervapor out of your filament. The Silica Gel (2-4 mm size) is a color changing type, so you should know when to regenerate it. The STL files Silica…
This is a printable Jar with cutouts in the Lid to insert a cheap hygrometer. It also has a place to insert a Hydro-Pack like Boveda to keep the humidity under control. This is modeled to fit a 8g Boveda Pack. It is a little fiddly to get…
