HSW Hygrometer round (Humidity + Temp, Honeycomb wall mount/adaptor)

This is a holder to be attached to the empty HSW inserts, to insert the often used round hygrometers.

With the slots in the back and the offset from the wall there is no problem in reading temperature and humidity. The hygrometer slides easily enough in and can be removed for battery changes. In theory it can still be used standing on the flat bottom surface as well.

Example: https://de.aliexpress.com/item/1005005060603239.html?spm=a2g0o.productlist.main.3.b22b6808xbMnCk&algo_pvid=20890e8d-9b72-4eab-bf39-29bc0a640a6d&algo_exp_id=20890e8d-9b72-4eab-bf39-29bc0a640a6d-1&pdp_npi=4%40dis%21EUR%212.05%212.05%21%21%212.18%212.18%21%402136675517069900975624021e341e%2112000031487209364%21sea%21DE%211709109847%21&curPageLogUid=oGx2q9hRdGv4&utparam-url=scene%3Asearch%7Cquery_from%3A

How to print: 

• I recommend face down with supports, so the support interface will not be visible afterwards.
• 4w (for stability), 25% gyroid will use up around 25g of filament

My HSW style of choice: Polymaker Polyterra PLA Marble White

The base model I've used is reneeceldesigns Temp / Humidity Holder - Circle, of which he posted the stp file on makerworld (go check it out, the model is awesome!)

→ https://makerworld.com/en/models/102038#profileId-108677