5,306 models
News March 20, 2022 added bigger hook March 21, 2022 added USB flash drive holder March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw) March 21, 2022 added box (screwed with M4x10 screw) March 21, 2022 added 2 wall parts…
Print approx. €1.84–€2.24 excl. taxPreliminary estimate for one variant
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
¿Quieres un soporte para teléfono móvil simple y fácil de imprimir? Presentamos: el soporte plegable para teléfono en forma de nido de abeja. Este soporte de impresión in situ también se puede imprimir en piezas separadas para una…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
Honeycomb shaped organizer Outer dimensions: width: 169mm depth: 152.5mm height: 102mm Max object size: Round: up to 47mm diameter flat: up to 52mm width (spatula…) Wall thickness: 2.5mm Featured in Prusa's Weekly Prints #54
Print approx. €19.53–€23.87 excl. taxPreliminary estimate for one variant
This fits a 220x220 bed. Made it for my sovol sv06 but will work on any printer with this bed size. The Gcode is for a 0.6mm Nozzle, printing at 235 Nozzle Temp and 75 Bed Temp. Using Arachne this would put spots all over the bed in the…
Print approx. €3.84–€4.70 excl. taxPreliminary estimate for one variant
A Pencil Holder with a honeycomb texture. Print time:5 - 7 hours at 100% scale (depending on settings) Dimensions: 7 x 9 cm (diameter x height) Weight: 42 grams Tip: try to calibrate your retraction settings before printing for the best…
Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant
This Honeycomb Desk Organizer is a smaller version of the Honeycomb tool organizer by Guillaume Gendron. I preferred a smaller version with less 'honeycombs' to store my stuff, since I didn't need the same amount of space. The organizer…
Print approx. €7.92–€9.68 excl. taxPreliminary estimate for one variant
Simple honeycomb end pieces I made for a monitor stand. Dimensioned for 1.5 cm thick plywood or similar. About 17.5 cm deep. I uploaded a version without and two versions with brackets. I also made a middle brace that can be put in the…
Print approx. €10.00–€12.22 excl. taxPreliminary estimate for PETGSource material: PET
A simple bookend with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is 120mm square. I printed in CF PC blend…
Print approx. €6.21–€7.59 excl. taxPreliminary estimate for one variant
This is my wariation to honeycomb wall key holder. Honeycomb as key holder is not my idea but I was not satisfied with any version I found on internet. Honeycomb is attached to wall by 2 small screws but you can use both side tape if you…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for PETGSource material: PET
This remix is supposed to be used with the absolutely fantastic design Honeycomb Storage Wall by RostaP Since I am using their design as a place to store my EDC and other bits and bobs, I came up with this simple design in order to store…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
177x190 honeycomb section, fits on Ender 3/5 beds. Should still tesselate properly.
Print approx. €6.87–€8.40 excl. taxPreliminary estimate for PETGSource material: PET
This is an easy to print, cheap, and if I may say so, attractive way to ensure that you never again have to burrow through piles of PLA offcuts to get to a pen or pencil. With 3 different sizes of module available, you can create a desk…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…
Print approx. €9.85–€12.04 excl. taxPreliminary estimate for PETGSource material: PET
The boxes are designed so that they can be printed without supports.
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
I liked this command strip mount for the honeycomb wall , but I prefer that the command strips be mounted to the side of the wall (vertical) rather than the top (horizontal). Also, I use 4 wall segments in a grid, and needed a double…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Changelog Honeycomb Wall Compliant Mechanism Clip Mount 2023-01-08 v1.2 Horizontal variant added 2022-12-11 v1.1 changed geometry and printing orientation for easy support removal and more reliable fit 2022-12-09 v1.0 initial public…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Why did I make this? My three-year-old is really into Bees right now. So of course, I went around looking for a good Bee design on printables for a 3-year-old to play with, and all the models I found mostly required glue for assembly or…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Borders compatible with the Honeycomb storage wall base part of the smallest size. Only four models needed to complete! I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Can be printed with 15% gyroid infill. Material: PLA…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
HSW mounted containers designed for 5,5 cm and 8,5 cm diameter flower pots. However, it can be used to store whatever you want.
Print approx. €1.84–€2.24 excl. taxPreliminary estimate for one variant
Just a slight modification to the original insert-cable-holder provided in the Honeycomb storage wall project which adds a notch to more securely hold a variety of cables. Adds a half-hexagon cut out above the cable-holder hole.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
A simple box for some added storage on your Honeycomb Storage Wall. Walls and base are all hard-modeled with the honeycombs, so no need to tweak print settings to get the honeycomb right. I printed with 4 perimeters to add some strength…
Print approx. €2.37–€2.89 excl. taxPreliminary estimate for one variant
This remix is supposed to be used with the absolutely fantastic design Honeycomb Storage Wall by RostaP Since I am using their design as a place to store my EDC and other bits and bobs, I came up with this simple design in order to store…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
Very simple pen holder. Designed in fusion 360 for my year-old daughter. The size of the combs and can be easily modified in the source file.
Print approx. €11.13–€13.60 excl. taxPreliminary estimate for one variant
I remixed SchuMaker's Smartphone Holder Design with honeycomb on the bottom part. Just filled the hole on the bottom with fusion360 and added a modifier to remove top and bottom layers.
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for PETGSource material: PET
I wasn't satisfied with the default Honeycomb Storage Wall inserts; they're press-fits, so the tolerances need to match perfectly. This is a problem when printing with larger nozzles/extrusion widths (which I do frequently for speed) or…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Overview This honeycomb vase can serve as a great decorative vase or pencil holder. It is designed to be scalable and printed in vase mode, so if you resize the model just make sure you're printing in vase mode. Printing No supports…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
This project is inspired by “Honeycomb storage wall” project by RostaP, but NOT COMPATIBLE with it. My honeycomb plate has different dimensions and its walls are thicker and more solid. This project is not finished. New components can…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Designed for Octoprint If you are looking for a nice Octoprint case, this is right for you. Also, RaspiCam is supported! Updates 01-16-21: New version available! All suggestions have been accepted and implemented in the new version.…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a wall hanging frame for my selfprinted photos wich didn´t need much filament and looks fancy ;) The frame is scalable through the parameterized f3d file. Depending on your printers print quality, the inner frame sit´s tighter or…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
I recently got my Prusa Mini+. After printing some addons, I searched for something to highlight the hexagons in the front plate. Since I couldn't find exactly what I wanted, I created these little insets in tinkercad. On my front plate,…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Honeycomb key organizer wall mount. Print in place the Honeycomb body, key chain and screw cap. Created with Maker Tales course.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
YAPH?! (yet another phone holder?!) I needed a phone holder in my car to better read traffic information. This is what I came up with. Mostly as a design challenge since I just started printing, but works pretty well if I may say so. Why…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
This stackable and interlocking bottle rack is perfect for reusable water bottles, wine bottles, travel mugs, and any other circular object with comparable diameter. The cell has a little more internal space than similar storage systems,…
Print approx. €9.34–€11.42 excl. taxPreliminary estimate for one variant
Shelf support bracket with HSW pattern. Compatible with HSW hooks and holders. Base part with cutout included. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Can be printed with 15% gyroid infill. Material: PLA Nozzle: 0,4mm…
Print approx. €3.90–€4.76 excl. taxPreliminary estimate for one variant
A reinforced bookend (for taller or heavier books) with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
This is a simple iPad stand. The original design is by @whoisjako . The original work is wonderful design, but the hook is too small and unstable for my old iPad, so I modeled a new one. The original design is at this URL.…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…
Print approx. €2.58–€3.16 excl. taxPreliminary estimate for PETGSource material: PET
A mount to store your phone charger on the honeycomb storage wall. Also works with bigger chargers like the OnePlus Warp Charge 65, or with other Euro-Plug devices that are not USB-Chargers. Fits CEE 7/16 Alternative II "Europlug" (Type…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
I completely remade the holder but used the original as an inspiration. Watch out, dimensions are probably different and therefore not compatible with the original. The original design by @kitlaan had "lips" that interlocked together to…
Print approx. €10.65–€13.02 excl. taxPreliminary estimate for PETGSource material: PET
Paint on supports on the front edge, the rest of the model does not need supports. Orient the model so that the tab on the top the hexagon is facing up. The tab has been removed from the bottom of the model so that it sits flat on the…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Simple tweezer holder to be used with the honeycomb storage wall .
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
I'm a big fan of the #Gridfinity storage system that Zack Freedman put together, so modified the shelf with a 3x2 gridfinity weighted baseplate!
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
I remixed this to handle a small variety of storage needs in a smaller space. Printed in 15% infill PLA with no supports.
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
It's a remix of the Big Einsy Case cover with hexagonal holes and Prusa logos. Big Einsy Case HoneyComb remix also available : https://www.prusaprinters.org/fr/prints/67408-big-einsy-case-honey-comb-remix Big Einsy Case HoneyComb remix…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
I made this mount to store spools on my Honeycomb wall while keeping the overall ascetic of the wall design. It is not intended to be used to feed the printer, this is just for storage. I designed the holder to be multicolored on the end,…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
This container was designed for baby plants in pots with a diameter of 5,5 cm. However, you can store in it whatever you want. @ania.kompa @fragile_handle.w.care
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
Standoff clamp to securely hold material for laser cutter/engraver and prevent flashback. Designed for Epilog Pro Laser Bed. May work on other honeycomb. Tapered from 5mm to 7.5mm. Holds material to be engraved and/or cut in 3mm (1/8") or…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Matching wall shelf for the Toniebox for my Tonie honeycombs: https://www.printables.com/de/model/355564-shelf-for-tonie-figures-regal-fur-tonie-figuren-to The honeycomb shelf is invisibly attached to the wall with the base plate. The…
Print approx. €4.88–€5.97 excl. taxPreliminary estimate for one variant
This 2 piece fan duct can be used to limit/direct the direction from which air is sucked into the fans or blown out. Once the fan plate and fan duct are printed, they can be glued togehter. I used super glue, which works fine. You could…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
This is a Cable Management insert for Honeycomb Storage Wall. Printer in my CR10s, heavily modified. Printer Settings: PLA // 215C // 65C // Infill Grid 15% // 4 Perimeters // No supports needed // 60mm/s 20 minuts print
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
List of parts to print and Commercial parts: 1-Left-Corner 2-Rigth-Corner 3-Strip-Honeycomb (x3) Commercial Parts Self-Tapping Pan Screw #5 x 1/2" (x12) Self-Tapping Pan Screw #10 x 5/8" (x4) I Left a table for references. Print…
Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant
Own design, simple & easy to print earrings set. Use earring hooks to finish the assembly. Watch out for left & right during hooks mounting. Print instructions Best looks with shiny, metallic like PLA filaments, 0,25 nozzle and rough…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
There are 4 different honeycomb phone stands, they are all similar dimensions but give different looks and printability. None of these models require support but i would advise a lower layer height for stand 1&3 to get better overhangs.…
Print approx. €2.71–€3.32 excl. taxPreliminary estimate for one variant
A simple remix of the HSW insert, but i think it looks adorable. No Honeycomb storage wall should be without one! No MMU needed, just a few simple manual filament swaps (explained below). I mounted the design from…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Remixed tool boxes to include honeycomb styling that easily mount in the Prusa Mini rails. Can also be quickly removed for easier access to all your tools. There are two variants of these tool boxes, one is large and one is small. The…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for one variant
Der Ständer hebt das Notebook um ca 5cm an. Dadurch passt es besser zum zweiten Hauptbildschirm und ist ergonomischer. Darüberhinaus sorgt für bessere Luftzufuhr zum Notebook. Neben den beiden Seitenteilen besteht der Ständer aus zwei…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
Holder for honeycomb magnet pins xtool
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
This honeycomb grid add-on fits the Aputure MC video lights . Due to it being friction mounted, there is no need for any modification whatsoever to the final print for it to stay attached. Just snap it onto the light and you're ready to…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
Extra strong hex patterned shelf you can stick anywhere. 2 screws required. 21.5cm wide x 16cm deep x 5cm tall
Print approx. €8.58–€10.48 excl. taxPreliminary estimate for one variant
This will allow you to use heavy-duty mounting-tape to hang up the Honeycomb Storage Wall. The pegs fit inside the honeycomb cells from the back and the inner hole has the same size as the other adapters in the system, allowing you to…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for PETGSource material: PET
Small holder for needle files
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
This is a fast-to-print paper holder uses the gravity and a rolling gear to hold the paper in place. This is an addition to the existing Honeycomb storage wall and a remix of the Gravity Broom Holder (only for paper or similar). I…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Here is a new remix of the fabulous Big Einsy Case designed by Boogie. Having already redesigned the cover with a honeycomb pattern, I figured that a remix of the case with the same pattern could make a cool bundle. I also drilled the…
Print approx. €13.30–€16.25 excl. taxPreliminary estimate for PETGSource material: PET
This is used to attach a Honeycomb Storage Wall (HSW) tile to a wall using M5 bolts. It's very similar to the M3 attachment object included in the HSW project, but with larger holes and a “cone" used to convert the countersunk holes into…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
This planter was inspired by all the drippy models going around these days. I wanted to put my own spin on it, and I'd say it's maybe mildly successful 🤷♀️ This planter prints in vase mode, with vertical corrugation to add to add…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
I stacked 10 of the original honeycomb wall part on top of each other and separating them with a thin layer gap for easy separation. I also used ironing on each layer to make the separation of the pieces easier. The piece is turned upside…
Print approx. €48.28–€59.01 excl. taxPreliminary estimate for one variant
Who doesn't love honeycomb models? This is my version of a honeycomb remote control holder. It has two slots of 30mm and 15mm width and 150mm length. The measurements were taken from remotes I had at home and should work for most users.…
Print approx. €12.12–€14.82 excl. taxPreliminary estimate for one variant
Based on the design from @Kittelot and trimmed in order to fit on the Prusa Mini. I also removed the center of the backing in order to save on material since it was not required. It fits 4x6" photos nicely! Print Settings: Print with…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Part needs support. stl's with 12mm and 14mm gap between hooks and with two different cylinder length. If you need other sizes - write me.
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
The 3d view doesn't show the honeycomb pattern as it was created with the PrusaSlicer modifiers, so you'll need to slice it to see the finished look. The border around the honeycomb section is slightly raised, so it requires a small…
Print approx. €3.84–€4.70 excl. taxPreliminary estimate for one variant
This is the Hex Scraper holder for the HoneyComb Wall. Thanks to @RobBeast as I used the plier holder as an inspiration for this.
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Recommended to print with 4 walls, Color change at 9.2mm…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
Quick and easy mount to hold (and display) your LTT screwdriver. Should provide a snug enough fit so it doesn't fall out but is easy to grab and go. Step file is included if need to make adjustments or use with other wall organizers.
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for one variant
A parametric MTG card divider with mana symbols. Included STL files have all 32 mana combinations (in the correct official color order) and are ready to print. No supports required, I also printed without build plate adhesion layer. Uses…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like cables, scissors, precision pliers and probably many more. It is part of my honycomb skadis collection. It has a hex shaped pin to…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Used: Voxalabs Aquila eSUN PLA+ Black 0.2mm layer height 25% infill, more the better really. Used ironing so get a smoother surface, but unsure if this is really needed.
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
I remixed this good looking mount, added logos, Honeycomb wall mounts and a cable holder underneath. I don't like the cable holder all that much (it works but just not great) and may take it out of V2. I hope you enjoy it. Recommend…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
(Thicker) Mini Shoe Horn with HONEYCOMB Cut-Out | REMIX Made a HONEYCOMB Cut-Out remix from the great original model and added a hole/honeycomb version for the thicker version of the shoe horn as well, the original hole was a bit too…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Honeycomb shelf and moss frame
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
This is an lenght increased version of the really nice laptop stand from WestInSpace. It works perfect on my 15' HP Envy. Print settings I used: 3 Perimeter 0.2mm layerhight 15% Gyroid infill Sunlu PLA Matte Black This gives a total…
Print approx. €5.61–€6.85 excl. taxPreliminary estimate for one variant
Outdated Please go to https://www.printables.com/model/961742-honeycomb-storage-wall-90-degree-corner-4-variants to find updated models as well as new variants. Description My storage wall is partially standing on my desk and for that…
Print approx. €5.82–€7.11 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Having an issue with exceess small parts laying around, I needed an organizer that would aesthetically fit 15-16 cm small glass shelves in ikea system. I aimed to reduce the material amount and allow for stackability. Print instructions…
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant
Intro Transform your hoodie into a 3D‑printing tribute with this minimalist yet striking honeycomb bead design. Inspired by the iconic honeycomb infill pattern, this STL model lets you seamlessly integrate a geometric, 3D‑printed…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
60 bottle holder, work in progress Spins on wall Base needs to be printed at 100 infil or drilled through and metal bolt used honeycomb design with inserts for different bottle sizes held together by inserts requires two skateboard…
Print approx. €1.95–€2.39 excl. taxPreliminary estimate for PETGSource material: PET
I took the iphone 13 design and added a hexagonal pattern to the back.
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
Slight modification of Prusa Steel Sheet Holder. Made it compatible with Honeycomb storage wall. Added small notches to make it easier to slide the plates into the thing.
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for PETGSource material: PET
It's just a special version for MMU from my Big Einsy Case Honey Comb : https://www.prusaprinters.org/prints/67408-big-einsy-case-honey-comb-remix Here is a link to the coordinated remix cover :…
Print approx. €11.24–€13.74 excl. taxPreliminary estimate for PETGSource material: PET
I designed this simple coaster as an example of how I make honeycomb patterns in Fusion 360 for a YouTube video which you can view below. This coaster is 5-inches in diameter with a 0.25-inch solid border and is 0.25-inches thick. It…
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant
A stylish honeycomb fruit basket. Perfect for your kitchen or coffee table.
Print approx. €12.30–€15.04 excl. taxPreliminary estimate for one variant
IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
I wanted an Apple Watch charger stand and found none that I really liked. I like open structures and honeycombs are really nice (the next iteration should be a Voronoi though). All the dimensions are fully parametrizable (OpenSCAD model).…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
For my honeycomb storage wall I designed this hook to fit a paper towel on there. Prints in common settings in about an hour. Have fun with it!
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
It's kinda simple for my first upload, but it gave me some joy to join two great designs. Printing settings layer height: 0.2mm perimeter: 4 infill: 20% cubic
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
I have very little space where I fly my flight sim. The Honeycomb Alpha Yoke already took out a large chunk of my desk space, there is no place to put my keyboard which is a small Logitech K400+. An underdesk keyboard drawer is not…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Hexagon Honeycomb Bee Earrings with color change.🐝 A pair of bees sat on a round disk of honeycomb made of hexagons, perfect for nature lovers and bee enthusiasts! Has a hexagon loop at the top for easy attachment to your preferred…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
