Honeycomb Wall PS5 DualSense and DualSense Edge Controller Mount (works for both)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.85 – €2.26 net (excluding VAT)
For file: PS5 DualSense Edge mount_0.2mm_PLA_MINI_2h5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.06 excluding VAT (range midpoint).
- Weight reported by the author
- 25 g
- Print time reported by the author
- 2.09 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wall mount for the PS5 Dualsense Edge
- Rating
- 4.857 / 5
- Likes
- 132
- Downloads
- 1,086
- Makes
- 8
- Views
- 5,692
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall.
Works with either type of rear paddle mounted and does not interfere with the FN buttons.
Printed in Jessie PLA Saftey Orang 0.2mm, speed, with 5% infill, and organic/tree supports.
Link to Filament:
https://www.printedsolid.com/collections/filament/products/jessie-pla-2-85mm-x-1kg-safety-orange