Counting matching models…
A minimalistic cover that protects your analog sticks. It goes over the track pad and, using a nub, snaps in place over the headphone jack. See Gif for usage. Works well for my use case of tossing the controller into my backpack. Use at…
I remixed my PS Portal Sticklocks to fit a dualsense Controller, cause i found the small form factor handy.
Similar to the Xbox Series X|S stand I did, this this the Playstation 5 dualsense controller stand. The controller fits perfect onto the stand and will not slide out. If you have any issues or questions please feel free to reach out to me…
This stand is similar to the other Playstation 5 Dualsense Controller Stand I posted but this one has a cut out in the back that uses less filament. It also has the PS5 title. If you have any issues or questions please feel free to reach…
🎮 DualSense Controller Storage Case – 3D Printable STL This is a 3D printable storage case designed for the PlayStation 5 DualSense controller . It features a rugged, compact design with a precise internal fit, perfect for safe storage or…
Rigid 27 April 2026: New! I strongly recommend using the flex model over the rigid model, because the rigid is not going to be as gentle on your controller, however two people asked for it so I've added it. To use this, you MUST ADD PUTTY…
Specifically designed for my desk that already has L bracket installed.
I had an old 8bitdo phone mount for Xbox one controllers lying around and wanted to use it with my Dualsense, so I made this remix to serve as an adapter for it. This is only the part that attaches to the controller and does not include…
this is a remix of two models, one is a 3d scan of a ps5 controller and the other is multiconnect which in my opinion is just a better way to connect parts to multiboard. your controller should fit very nicely because my model uses an…
For those who want to make commercial use of the printed parts, access the link below to find the 3D model licensed for commercial use and more complete editable files. PS5 Dualsense Stand for Comercial Use + Step File I made this support…
Mount for console controllers that has a ball-end that works with RAM mount arms . 2 sizes available. the ps4 version is a kitbash of Akaki's mount piece, so it is a bit of a mess, but works.
Upper part to fit a iPhone 15 pro Max with Apple clear case. One version in tight fit. other version in loose fit.
This remix was posted with authorization from the creator of the original scan, Xile6. If you would like a much higher-quality scan of the DualSense faceplate (this mod uses 5% of the original's polygons) that doesn't use any notches,…
Dualsense Holder compatible with Modular desk organizer by @PiotrB_2286504
This is an oddly specific gadget, allowing mounting of this particular PS5 DualSense Edge controller charger to plantation blind rods of width ~13.7 mm and depth ~15.3 mm. I included the STEP file for easier remixing of this part for…
PS5 DualSense controller holder for Ikea Skadis panel. More vertical variant of @zenzmatz_213590 holder
A minimalistic cover that protects your analog sticks. It goes over the track pad and, using a nub, snaps in place over the headphone jack. See Gif for usage. Works well for my use case of tossing the controller into my backpack. Use at…
I remixed my PS Portal Sticklocks to fit a dualsense Controller, cause i found the small form factor handy.
This remix of the PS5 DualSense Controller Phone Mount offers an improved fit for the Google Pixel 7 Pro in a Dbrand Grip Case . The redesigned mount ensures that the volume and power buttons are no longer pressed against the mount, and…
I bought a cheap phone holder for DualSense controller from AliExpress, but hated the springy phone holder. I had most of these parts lying around. The model is pretty simple. Printing settings These don't matter that much. It should be…
Similar to the Xbox Series X|S stand I did, this this the Playstation 5 dualsense controller stand. The controller fits perfect onto the stand and will not slide out. If you have any issues or questions please feel free to reach out to me…
This stand is similar to the other Playstation 5 Dualsense Controller Stand I posted but this one has a cut out in the back that uses less filament. It also has the PS5 title. If you have any issues or questions please feel free to reach…
Remix of @PrimeRetroGamer Stand that supports two controllers instead of just one.
Snap this onto your DualSense and you've got an all-right controller! The thumbstick is controller by moving the whole controller. Rest the controller on your lap or the table, and move it around. Its motions are transmitted to the…
Hace un tiempo adquirí un mando de Ps5 DualSense para jugar con mi móvil a juegos como Call of Duty, Pubg, etc. Fue necesario comprar además un soporte para el teléfono móvil que lo sujetase al mando. Adquirí este,…
Dualsensense controller holder model - use double sided tape to glue the model under surface, and slide the joysticks on
The holder lets you adjust the size of the phone to fit current standards.
This is a wall mount adapter for the DualSense PS5 Stand from #Referentiel . Align the model of the wall mount with the holes in the base and the wings of the model from referential. Then subtract the space of the wall mount from the base…
I'm Printing these Solid. 100% infill. The one with charging access needs supports, i used tree supports on auto. Twist the controller In & Out from the bottom first to insert/remove. It's a little snug but works well for me.
If your PS5 DualSense thumbstick cover is worn or torn, this replacement cap is an easy solution. It snaps securely onto the existing knob, restoring the functionality and feel without replacing the entire thumbstick. Print Details: Layer…
I remixed Trajan s “ Honeycomb Wall PS5 DualSense and DualSense Edge Controller Mount ” to a mount that could hold the controller at the side of a NR200(P) computer case by Cooler Master. It needs supports to be printed.
This custom 3D-printed phone holder for the PlayStation 5 DualSense Edge controller is a sleek, ergonomic accessory designed to enhance mobile gaming. Crafted to perfectly match the contours of the DualSense Edge, this holder securely…
A clamp mount for a Dualsense controller to attach it to an Ikea swivel chair like Poäng or Pello
plastic membrane for dpad on the extremerate or gearZ clicky kit for the dualsense/dualsense edge as the original rubber membrane dpad direction would start to get stuck and very hard to actuate after only 1hr of use, you can also do the…
PLA is great for this despite being brittle and not as flexible as PETG. Try the original size (100%) and if its too loose, print it in 2% increments (102%, 104%, etc..) or vice versa for too tight. It should be able to pop just right…
Stylový držák na ovladač DualSense s logem SK Slavia Praha . Podpěry nejsou potřeba Ať žije Slavie!
⚠ Commercial Use Notice: If you intend to sell physical prints of this model, please purchase the licensed version here: 👉 Buy the commercial license on Etsy 🔒 License Terms: This model is for personal use only. Commercial use (including…
Mount for a PlayStation DualSense controller, featuring a countersunk hole for an M8 screw to attach it to a 40 I-type aluminum profile. To mount it, you’ll need an M8 hex bolt and an M8 T-nut if you're using a 40 I-type aluminum profile.…
The stand holds four DualSense controllers. On the underside, there's a 5x2 Gridfinity grid. The model comes in two versions: “Full” version with built-in height to ensure the controllers don’t overhang “Slim” version without a deep base,…
It's simple scan of charger https://store.sony.com.sg/products/playstation®5-dualsense™-charging-station
PS4 DualShock 4 and PS5 DualSense controller under desk mount 6mm, 8mm glass 19mm table
A stand for two ps5 controllers. This model is a remix from a model for one controller from La Guía del Mando (can't reference it as it has since been either switched to draft or has been deleted). I did a few modifications such as…
Experimenting with using a PS5 Dualsense controller as a steeringwheel for driving-games. Model uses my snapon mount for the controller, you might need to add something between controller and mount to add extra friction so that the…
The PS5 controller's holder for Ikea Skadis. The idea comes after Maple_3D wall mount , but I used the proper controller's dimensions to fit the shape perfectly. It's easy to print without supports. It mounts to the Skadis using universal…
Remix to eliminate the gap and add a M3 hole to hang it on a Honeycomb Storage Wall.
⚠ Commercial Use Notice: If you intend to sell physical prints of this model, please purchase the licensed version here: 👉 Buy the commercial license on Etsy 🔒 License Terms: This model is for personal use only. Commercial use (including…
Designed for 0.1mm layer height (0.2mm first layer height is fine). No supports required. Use 1mm thick double-sided tape pieces UPDATE: added BSP D9 version with +0.4mm clearance
I find the stock paddles a little uncomfortable, making it hard to hold controller properly. So, I made these paddles so you can comfortably rest your middle finger on the controller while still being able to press the paddle. Print…
This Version is untested at the moment but should work I hope. I tested the version before this but sadly the phone was at a too shallow angle for my liking, so i changed it in this model.
🎮 PS5 DualSense Controller Stand – Identical to the Original 🎮 This is a 3D printable stand for PlayStation 5 DualSense controllers, designed to perfectly match the original Sony stand in both look and function. The model offers a snug,…
Elevate your gaming setup with this sleek and functional 3D printable stand designed for the PlayStation 5 DualSense controller. This version features a cleaned design and an integrated base for stable display. It's perfect for keeping…
Enhance your gaming station with this refined 3D printable stand specifically designed for the PlayStation 5 DualSense controller. This "v2 cleaned" version offers a streamlined aesthetic with a sturdy base, providing a secure and…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Paddles for DualSense controllers. These…
Not beginner-friendly ⚠ Commercial Use Notice: If you intend to sell physical prints of this model, please purchase the licensed version here: 👉 Buy the commercial license on Etsy 🔒 License Terms: This model is for personal use only.…
It needs to be mounted with double sided tape to the bottem of the charging station. I modeled it in pieces so its easier to print
I made this DualSense Phone mount for Quadlock phone case. Easy to use, i think looks really well on the controller. It is foldable, you can adjust the phone angle and also easy to carry when it is folded. I printed with PETG, 25% infill,…
PlayStation PS5 Dualsense Minimalist Controller Stand with desk fixator (18mm thickness)
Bring the Halloween spirit to your gaming setup! Halloween! You can print just the pumpkin and use it as a simple stand, or let your controller fully embrace the Halloween spirit with the complete version! The inner side of the hat…
A little experiment with mounting my mobile phone (OP8T with bumper case) to a PS5 Dualsense controller using a simple snap-on mount. Borrowed the profile for the snap-on part from https://www.thingiverse.com/thing:4668566 . Included are…
Printed in eSun PLA+ at 0.16mm layer height. I always have 0 layer interfaces and top z distance as 0.3mm to correspond to layer height. 14 hours and about 200 grams with 10% gyroidal infill. Very stable with good weight Tree support used…
This mod is a modified thumbstick gate for the DualSense Edge controller, designed specifically for fighting games. It is particularly useful for players who assign up input as a move button and want to prevent accidental upward…
Yet another dualsense holder for gridfinity. this one has the controller more vertically and a slot under for storing charging cable. It takes up "2x4" grid spaces and no holes for magnets. Printed on a P1S with the 0.16mm optimal profile…
100% inspired by the Switch Pro controller by npiegdon ( https://www.thingiverse.com/thing:3030629 ). Thanks to davec54's 3D scan, I have improved upon the original version of this stand. Now the thing fits like a glove. It's quite a bit…
This is a remix of the excellent PlayStation PS5 DualSense Minimalist Controller Stand by h00f . I loved the sleek and low-profile design of the original, but I wanted to integrate it into my Gridfinity ecosystem. I have added a…
Modified the PS5 Controller Stand to fit the M5 mounting grid of a Balolo Setup Cockpit
Controller base by "@ConradJun_328712" and Fallout Vault by "@TheDeveloperG_237560". I just combined the two :D
it a cover that you can put on top of your joystick as a cover
🎮 DualSense Controller Storage Case – 3D Printable STL This is a 3D printable storage case designed for the PlayStation 5 DualSense controller . It features a rugged, compact design with a precise internal fit, perfect for safe storage or…
A grip for the Miyoo Mini Plus (MMP), based on the DualSense PS5 controller, which I find very comfortable to hold. Two distinct variations are provided, Comfy and Roomy: The Comfy variation sacrifices access to the bottom 3.5mm jack,…
A grip for the original Game Boy Advance (GBA), based on the DualSense PS5 controller, which I find very comfortable to hold. It provides access to the bottom 3.5mm port, the power button and the volume control. The GBA is held in place…
Modified this robust and tidy DualSense mount for Skadis by Felixoid. Integrated the Universal Hook and added a second lower hook for strength. Rounded the bottom corner to aid attachment. Removed the slight taper on each side to allow…
ENG This is a custom-designed PS5 DualSense controller stand inspired by the Hungarian YouTube creators WeAreTheVR . The stand features a textured "lines" base and bold raised lettering for a clean, eye-catching look. The letters are…
A remixed version of the original PS5 DualSense controller holder designed for the IKEA Skådis pegboard system. This variant replaces the solid back panel with an open, tubular design featuring cylindrical tubes at varying diameters,…
Rigid 27 April 2026: New! I strongly recommend using the flex model over the rigid model, because the rigid is not going to be as gentle on your controller, however two people asked for it so I've added it. To use this, you MUST ADD PUTTY…
Specifically designed for my desk that already has L bracket installed.
Minimalist display dock, precision-engineered to showcase your PS5 DualSense controller.
I had an old 8bitdo phone mount for Xbox one controllers lying around and wanted to use it with my Dualsense, so I made this remix to serve as an adapter for it. This is only the part that attaches to the controller and does not include…
All parts are pre-oriented for optimal printing Use a lower layer height for best surface finish and consistency Standard materials like PLA or PETG are suitable
this is a remix of two models, one is a 3d scan of a ps5 controller and the other is multiconnect which in my opinion is just a better way to connect parts to multiboard. your controller should fit very nicely because my model uses an…
Remix of PS4 pad paddles to my PS5 DualSense mod. Printed and then molded with hair dryer, just like the original one. Paddle.stl is original file, my modification is in wings.stl. You can also download scad file and add modifications…
Playstation 5 Controller Stand narrow version 50mm wide version 55mm Supports: Doesn't Matter Resolution: 0.16 Infill: 20% Filament: NoName PLA White Notes: narrow version 50mm wide version 55mm Update 20.12.2022 Ich habe eine Multicolor…
Compact and precise housing for Pico 2, without GPIO access, ideal for use with heatsink as DualSense dongle. https://github.com/awalol/DS5Dongle
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Česky: Držák na stěnu pro ovladač Dualsense na Playstation 5 s možností vložení nabíjecího…
Added a PS Logo intended for use as a Dualsense Wireless Dongle. Also added a section where the LED can shine through.
I wanted a case for my DualSense dongle, so I modeled it up with inspiration from the other models already made. Both BOOT and RESET buttons are available to press, with the BOOT button marked differently by a small indent. Get the USB-A…
A little experiment with mounting my mobile phone (OP8T with bumper case) to a PS5 Dualsense controller using a simple snap-on mount. Borrowed the profile for the snap-on part from https://www.thingiverse.com/thing:4668566 . Included are…
I printed these in “draft” mode, 0.2mm layer height, and 20% infill, on an Anycubic Vyper with support. Print the nut and bolt from the Xbox One version, as it does not need to be modified. The paddles were modified from the Xbox One…
Remix of this model https://www.thingiverse.com/thing:4694896 to store two controls and a headset
![[Remix] Notched DualSense Controller Faceplate](https://media.printables.com/media/prints/1012330/images/7694595_bedd3f61-5183-4a11-a9c8-f0f318f582a1_809cb393-9e02-4056-ba76-01e7cc07a431/pxl_20240919_014400529.jpg)
