Counting matching models…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
This is a holder for the YoLink temp sensor for your refrigerator and freezer. There are six spots on the back to glue round 6mm x 2mm neodymium magnets. I recommend putting a magnet in all six spots. I used super glue to keep them in…
Remix to fit these cheap aliexpress bluetooth sensors
Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…
So this is an evolution of my 1x1 GR model that just held the display, as I wanted to have a double-sized unit as a temperature and humidity sensor. This uses my ribbed casing design, that has 2 heights at which panels can be slotted in.…
12-48V 4wire PWM Fan Temperature Speed Controller Board Case. 1X4L FAN-1248 CONF V2-E Uses four M3x16 Socket Head Screws and four M3 nuts. Activation levers for “-, +, OK” buttons. Check for fit of case front connector holes as PCB…
I didn't want to stick it to the wall but hang it => spacer with a hole for the screw head. Nechtěl jsem lepit na zeď ale zavěsit => distanční podložka s otvorem na hlavu šroubu.
Wall Cradle Bracket for Sonoff 02LD Temperature Sensor & Probe. I recently purchase the SONOFF SNZB-02LD IP65 Zigbee LCD Smart Thermometer (Probe Version). With the probe attached to the boiler flow pipe the temperatures can be monitored…
We installed one of these and put it in the wrong spot! To fix our mistake, we needed to fill the hole. Example printed with PETG
A compact stand to securely hold a moisture and temperature meter. Designed for 3D printer AMS units, but equally useful as a standalone sensor holder for home, office, or workshop environments. Keeps readings visible and stable without…
Simple base to instal humidity sensor on 3mm Plexi. Printed from PLA with small suports
This enclosure was built to house the ESP32 and sensor that measures humidity, temperature, pressure, among other things for use in HomeAssistant. You can print in PLA as it is used in room temperature indoor conditions. This is designed…
Safely wall mount Aqara W100 Climate Sensor using two poster size command strips. Includes versions with alternate mounts, two holes 40mm apart, and 4 x "3mm x 10mm" magnets. For stability, since the button pushes are on the edge of the…
REX C100 Temperature Control Housing with SSR I wanted a nice housing for my temperature control that was also electrically insulated. Since the control operates at 220 V or 110 V, I accept no responsibility for the electrical wiring.…
This is a holder for two Koso Coin temperature displays for the Husaberg 70° FS / FE 390 450 570. It fits perfectly (with the original hole) and holds very well in place. I would recommend to make it from ASA or ASA-CF to make it…
About This is a customizable / generic solar radiation shield for temperature sensors. By printing one roof and however many 15mm tall main body pieces are needed you can hold whatever height sensor you need. Instead of being specific to…
A case for Waveshare RP2040 Zero with the possibilty to glue in a 2pin jumper connector, meant to be used as a temperature sensor inside a pc. https://github.com/Ranatos/RP2040-Zero-liquid-temperature-sensor
Remix of temp/humidity sensor. Wanted to be able to attach it to the lid of the tote. Inside of tote had a lip inside for support. Modified original model, added a back plate to it. And has 2 holes for mounting. Ended up using paper…
Model to mount a 6mm diameter thermistor such as this one to an aluminium extrusion. One M3x6 SHCS screw + t-nut should be used to attach the mount to the extrusion. The temperature sensor itself should stay in place due to friction. I…
This project is a custom 4-key macro keyboard with an integrated 16x2 LCD display that shows real-time CPU and GPU temperatures . The device is based on an ESP32-C3 microcontroller and communicates with the PC via USB-C . Temperature data…
i needed something to better catch motion so i made this. 45 degree mount - i am using double sided tape. No supports needed.
I needed a replacement knob. The old one was lost somewhere. PLA, 5 minutes print on Flashforge 5M. Infill: 15% Ghyroid internal print. No supports needed, brim advised 5 mm.
I wanted a solid piece to fill the empty vent covers to help keep heat & fumes in, but also wanted somewhere to place a temperature & moisture sensor, so I figured this will do the trick. I made the hole 41.5mm, which fits my AliExpress…
Tuya Bluetooth Temperature Humidity Sensor LCD TH05F AAA case with room for battery holder The sensor can be found on aliexpress:…
(english below) Universeller Halter für den Sensor der Außentemperaturanzeige passend für Audi 80 / 90 (B3, B4), Cabriolet/Coupe (Typ89), Audi 100 (C3 Typ44, C4), Audi 200 (C3 Typ44), Audi V8 (D11) und weiteren Modellen. Vergleichsnummer…
Welcome! For a while, I've been using Zigbee and Bluetooth temperature and humidity sensors around my house. After many issues with Zigbee disconnecting and batteries running out 3 times a week. And since I've been constantly repairing…
Temperature tower step for testing temperature without the need for custom GCode.
Housing for temperature sensor. Works with BIUWING brand and possibly others.
A case for a STC-1000 type-ish temperature controller. Insert a 12mm Ø cable bushing to the guide, that should leave enough room for the required cables but keep them snug. Fittings for M3 x 6 mm screws. Used in multiple incubator projects.
filament sıcaklık testi G-KODUNU UNUTMAYIN CREALİTİ İÇİN M104 DÜR ÖRNEK OLARAK (M104 S230) BU ısıyı 230 DERECEYE AYARLAR
This project integrates: BME Temperature/Humidity Sensor LD2410C LiDAR Sensor WiFi-enabled ESP32 Designed for smart home integration - instructions provided below are intended for use with Home Assistant with ESPHome. The enclosure is…
Vent cover for AD5M/AD5X with integrated slot for temperature/humidity sensors. Also available without the hole for the sensor. Link to the sensor I used: https://www.amazon.com/dp/B0DXCSXT9X?th=1
Fits for standard temperature and humidiy sensor with sensor interface dimensions of 25.4mm x 44.5mm
Internal temperature sensor for the 1515 tophat of a v0. Model is small enough to where shrinkage comp is unimportant. Printhead will not hit sensor! Step and Onshape link available if changes need to be made. Print setting suggestions:…
This fits the generic temp/presence sensor from Hobeian: https://www.zigbee2mqtt.io/devices/ZG-204ZV.html
Use an M5×10 screw to mount the holder onto the L-profile, and M2×12 screws to connect the radiation shield to the holder. Print with white PETG filament.
This enclosure is designed for the Arduino UNO R4 WiFi Thermal PID Controller , a fully web‑based temperature‑control system that drives a heater through an SSR and reads temperature from either a DS18B20 or a MAX31856 thermocouple…
This enclosure is designed to monitor the temperatur and humidity in the warehouses and other environments, it has a basic protection from environmental effects like rain and wind, however it is not certified or designed for outdoor use.…
This is a case for the Aqara Temperature and Humidity Sensor with an integrated holder for 2 AA batteries. The size of the case is 42x38x70 mm. I use several Aqara Temperature and Humidity Sensors around my home, but replacing the CR2032…
If you are lazy to source the threaded shafts, this just clicks in. Tested with PETG, the pins are still relatively small, and the layer aligment is not greatest, so better dont try to disassamble it too many times... Just screw it on to…
Vent cover for AD5M/AD5X with integrated slot for temperature/humidity sensors. Also available without the hole for the sensor. Link to the sensor I used: https://www.amazon.com/dp/B0DXCSXT9X?th=1
This temperature sensor mount fits barrel-style temp sensors as well as a 2-pin JST XH connector for wiring. The temperature sensor and its wiring can be secured using zip ties. The JST connector is secured by friction fit. The mount is…
This already has custom gcode for the mk3.5s to print a temp tower and change temp on the right spots
I wanted a filament dryer box and found a YouTube video showing control circuits for temperature and timer. I drew up the 2 boxes to be used on my dryer box. The modules are sold on Amazon and eBay and uses a heated bed from an older 3-D…
This is for testing Fiberon PETG-ESD filament, specified at 250-290C nozzle temperature. If using the STL, you will need to modify the gcode to manually set the temperature changes. The provided gcode is for a Core One Plus, using…
Our Stiebel Eltron HT 80 S Boiler Knob was broken, so I made a new one. If you do a color change where the arrow cutout starts, you get a nice indicator. Note: I already fixed the mistake in the image. The file you download is correct.…
Really simple design. The old locking clip mount breaks easily so I just made a holder to sit it in. Probably not ideal for outdoor use but for indoor use it will work great. It has 2 holes in it for drywall screw mounting. You can also…
I printed this with no supports on my Prusa Mk3s+ using some cheap black PETG. Screw holes are sized for #8 flat head screws. I'd love to hear your feedback and see pictures. Thanks!
I have modified the HEX Scraper to accommodate a standard temperature and humidity sensor. With this scraper you can know the temperature and humidity outside or inside the car. It is a standard temperature and humidity sensor that can be…
This is a thermohygrometer using a lolin32 lite (actually it doesn't matter) board and a sht3x sensor.
A simple mount for secure attachment of the thermometer, while making it easily removable (to change batteries etc). Uses M3 socket head bolt for sensor attachment. Uses either one #8 or two #6 screws for the wall mounting.
I installed this cheap chinese sensor in my swiming pool: pH-W18 Yieryi-Tuya Smart WiFi, PH ORP, TDS, EC SALT S My pool water circuit is in 5cm diameter. I used a support collar (see picture) with a ¾ inch thread. Then I printed the probe…
Remixed original design to add space for four magnets in the rear for mounting on metal objects. The stl uses 10mm x 2mm magnets. Fusion 3D file added as well. Can change the diameter and depth of the magnet used in user parameters if you…
I designed this tiny sensor case around the popular D1 mini and a BMP280 sensor. It is a very sturdy case that is held together by 4 bolts M3*8 and features a blind button hole at the back so you can hang it over a nail or screw head. For…
UPDATED! WIP! Plastic trim piece suitable for the outside temperature display (ATA) suitable for w201, w124, w126 Basically an almost 1:1 with the real part, save for a few unnecessary angles. Added 4 different models, full versions and…
1U Rack mounted temperature & humidity sensor. Uses ESPHome to send data to HomeAssistant, but can work also without a network. Mounted to the right side rail. Needs right angled micro usb cord to power, straight ones do not seat properly…
About Original Prusa MINI Enclosure comes with the temperature / humidity bracket which can be mounted only on the front/back holes of the enclosure, due to the fact that those holes are 60mm apart. I modified the Guide & Covers >…
This is an AC Infinity temperature sensor holder designed for the CLOUDLAB 733, with a diameter of 22mm. The cable fits snugly and can be mounted upside down, making it quick and easy to adjust the height. I printed it using PLA. Print…
With this temperature test 3D file, try differents tests https://collaborate.shapr3d.com/v/LUJWXNhqx9wpRBPicrTEH
Housing for Digital temperature sensor with mounting bracket Print Settings Printer: P3 Steel Rafts: No **Supports:** No Category: Electronics
A holder for a digital humidity and temperature sensor to secure with double sides tape on any surface. used module:…
After I built the filament drying unit (see my posts few days ago) I needed to add a temp.+humidity gauge. This box fits my post for filament drying lid: https://www.printables.com/model/999034-filament-dryer-chimney and also you can…
Moje váha na cívky je připevněna na originálu držáku pro cívky. Držák pro displej natlačit na držák pro cívky, jde na těsno, potom vložit krabičku displeje a natlačit a podle potřeby natočit. Displej a mikrospínače a DTH11 drží zadní…
Opravná díl do grohe grohtherm na regulaci teploty
I had an extra round temp/hygrometer and wanted to monitor the temp of my chamber when printing things such as ASA or PAHT etc. This mount slides into one of the holes in the back of the chamber and is easily removable. It is just…
Humidity and temperature meter housing mount for Creality enclousure. Improved attachment to the Creality case tube. Sunlu PETG, Support: tree, auto, organic, on build plate only. Infill: 25%, Wall loops 3.
Overview video for this sensor: https://youtu.be/VefbT6RuT-4 Build video (part 1 - hardware): https://youtu.be/fA91LcJRbhI Build video (part 2 - software): https://youtu.be/uDsnqi1Vl4U Build video (part 3 - openHAB):…
The heat-sink fan on the E3D V6 draws in air from all directions. This can lead to localised cooling of the print and Heated Bed. The is especially noticeable when printing at high temperatures. This fan shroud ensures air is drawn from…
this test shows how fast your filament and nozzle are capable of printing. You can see my results in the attached photos. I compared the following nozzles: Prusa CHT High Flow Prusa ObXidian CHT High Flow Prusa Adapter + Standard E3D…
I didn't wanted to buy another temperature sensor, but had some Mijia Temperature and Humidity sensors laying around, which I planned to install inside the enclosure, but wasn't sure how and where. The models by Valerie Moore gave me an…
Mounts for temperature sensors: 3mm thermistor for the 2020 extrusion (updated model with less blocking of the extrusion surface) 1.2mm thermocouple for the 2020 extrusion 1.9mm or 3mm thermistor for the Rapido hotend: The mounts for the…
E3D Titan Aero High Temperature Fan Duct. Designed to control the airflow from the Titan Aero and direct it upwards away from the heated bed. Requires that the included Titan Aero Fan be reversed to draw air through the heatsink rather…
Switch for fiat ducato wind and temperature panel The model has a hole in it that doesnt show up on 3d model
A nice LED panel which shows the current time, shows the current/min/max temperature and UDP messages. GitHub: https://github.com/gregerw/LEDDisplay
A case for the power supply and the controller with an arm for the DHT22 sensor
This is a holder for the YoLink temp sensor for your refrigerator and freezer. There are six spots on the back to glue round 6mm x 2mm neodymium magnets. I recommend putting a magnet in all six spots. I used super glue to keep them in…
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
The size is designed to fit together with the rear sensor bracket Moes Sensor: https://s.click.aliexpress.com/e/_Dkd1OpB
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…
A wallmount bezel for the Wemos 0.96 OLED display. It also includes a space for the SHT30 temperature and humidity sensor. Display should fit snuggly, but install carefully. sometimes the very thin glass is not mounted 100% square and can…
Can be used with most of the rectangular temperature & humidity sensors you can find on Amazon or AliExpress. The Prusa Temperature Sensor also fits well. Hole dimensions : Front : 48.20 mm x 29.20 mm Rear : 45.80 mm x 26.80 mm BOM : 2 x…
A simpel stand so the sensor is not laying on something. Standard is tight fit and angle of 30 degrees. Easy print with supports. I used organic supports.
EN: Hi guys, i created a simple model for a STC-1000 temperature controller (see: https://amzn.eu/d/ickbkgd ). With this mount, you can easily slide it in and fix it with the supplied brakets. DE: Hallo Leute, Ich habe ein einfaches…
Custom coaster with Low Temperature Hazard icon/sign. Decorate your home with something special. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the…
This is an updated model to be used to measure the Heat Deflection Temperature (HDT) of a 3D printing material. The test can give results close to the ISO 75 HDT/A and HDT/B that are commonly found on technical datasheets It is to be used…
EN: To indicate temperature or function associated with temperature (for example, temperature indication, temperature monitoring points). DE: Zur Angabe der Temperatur oder Funktion im Zusammenhang mit der Temperatur (z. B.…
This is a replacement thermostat/ temperature control knob for a General Electric Compact Freezer model FP5DXARWH. It may also fit Hotpoint freezers. The GE part number was WR02X10118. The OEM part is no longer available. It is made with…
No overhangs. Basic and simple print Uses the original “part 2” file. I super glued Part 1 and Part 2 together using Krazy Glue. The magnets fit snug, but I also glued them.
I was looking for a holder for the xiaomi humidity and temperature monitor for the upper structure, I couldn't find anything, so I had to make one. Printed with pla
Remix to fit these cheap aliexpress bluetooth sensors
This is a remix of https://www.thingiverse.com/thing:6792810 Shortened the depth of the ring to better fit the hygrometers commonly found from Aliexpress/temu. also removed some bulk in the legs to shorten the print time a bit. Thanks to…
Hello, I am presenting a simple 40 mm pipe bracket for the external temperature sensor of the Afriso weather controller.
A little stand that houses a aqara zigbee temp and humidity sensor Designed to be printed on its back without any support.
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
