fast 30 min temperature & bridging tower MK4S HF nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This prints in 30 minutes.
- Rating
- 4.8 / 5
- Likes
- 87
- Downloads
- 813
- Makes
- 5
- Views
- 2,218
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for your material.
This tower is designed for PLA.
There are two versions:
- Fast, 30 minute version from 230 to 180 in steps of 10*C.
- Slower, 60 min version from 230 to 180 in steps of 5*C.
The GCODE file is already set up if you have a MK4S with the HF nozzle (HF0.4) just send it to the printer an press start, the temp changes are embedded in the file. I have also provided the .stl if you want to slice yourself but you need to enter the “M104 STTT” line at the appropriate layers where “TTT” is the temperature.
See here for my regular size temp tower ~1.5 hour print.