Counting matching models…
Description All printable parts for your Original Prusa MK4S and Original Prusa MK3.9S. Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTURAL Filament: PETG (tested on…
Cover for elBox - Bear Upgrade Prusa (i3) MK4S
I was very glad to have come across mkoistinen 's excellent PRUSA MK4 Bin model. Very useful for quick disposal of waste filament and minor support elements, in clearing the print bed, and re-setting up between prints. Printed one for…
I started with John 's Cable Cover for Prusa MK4/MK4S/MK3 model, but that did not work well for me. The extrusion rail cover segment was oversized (overhanged the edge), and that poor neuron that had finally achieved some reprieve over…
I liked the design by @AHPrusai3MK3SKit but sadly discovered that it doesn't fit the MK4S frame, so after a very quick tweak in Tinkercad we get this. Print settings:- PLA 0.2mm Generated support material with auto generated supports…
I was in a hurry and printed this simple model. The red numbers are as measured with calipers. I'd say the results are pretty good.
Gedruckt wurde auf einem Prusa MK4S mit 0,4er Düse, PETG, auf der Rückseite stehend. Kein Stützen erforderlich. Befestigung mit 2 original M3 Prusa Schrauben + Muttern in die vorhandenen Löcher.
A Prusa gyorsulásmérő doboz könnyen nyomtatható. A fedél kétféleképpen készíthető, felirattal vagy anélkül.
⚪Read first! You need to buy some parts yourself. ⚪ What you need to prepare: 10mm Timing pulley T16-2GT (d=5mm) — 1 pcs 10mm idler pulley T20-2GT (d=5mm) — 1 pcs, either smooth or toothed is OK. 10mm 2GT timing belt — same length to…
This puts the GPIO card under the wifi card, so the pins are low and at the back of the machine and easily accessible. The GPIO cable passes through the slot for the bed cables. MMU text included for Wifi and GPIO symbol. Uses 4 m3x10 (or…
Star Wars Achsrotation MK4 / MK4S X-Wing Todesstern habe ich mit 50% Infill und einer 0,4 Nozzle und 0,10mm Fast Detail im Prusa Slicer Gedruckt über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Star Trek Achsrotation MK4 / MK4S Enterprise D um Planet habe ich mit 50% Infill und einer 0,4 Nozzle und 0,10mm Fast Detail im Prusa Slicer Gedruckt über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Printed on MK4s with thicker walls and 50% infill.
Remix of the already great design by pipo. Also check out the original design! Let there be light! Use this model to easily mount an IKEA SKYDRAG oder SILVERGLANS (40cm) light bar to the Z-axis of your MK4/MK4S. The light bar is also…
Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…
I liked the idea of printing a front cover for my printer, but I have moved my xLCD to outside of my enclosure. So I remixed the front cover from AngryWookiee and filled in the spot where the xLCD would be. Printed with the 0.20mm SPEED…
A casing for the Xiao ESP32 S3 Sense that is compatible for most Prusa printers, as the mount is attached to the 3030 aluminium extrusion. Notes: I won't be covering the software section of this camera, but you could follow this guide:…
The box is fixed to the frame so that it does not need to be supported by the table. Outer dimensions: 247.2x99.8x52 mm (without hooks). It's possible to print both the box and the lid at once. Before printing consider adjusting size of…
To ensure long‑term protection of the display and prevent dust, scratches, and other environmental contaminants from compromising its clarity, it is advisable to print and install a dedicated protective cover. This accessory is…
Print the side with the wifi icon facing the plate With this "upgrade," my printer no longer loses Wi-Fi. I can't say how much the actual gain is, but I went from struggling to connect to having it already connected as soon as I turned it…
Accessorize your I3MK4S' frame with this clamp and text together. You add custom text by combing the models in your slicer. Print on it's back with supports, do not use “tree/natural” supports, they are harder to remove from the print.…
You'll need four 608 ball bearings, four M4 x 20mm button head screws & 2 hex nuts, plus the original M3 x 18mm screw used on the original filament guide. 2026-04-06: V2 addresses an issue reported by @mgranger114
A compact mount designed to attach to the Prusa MK4S frame, providing a convenient place to store the print-removal scraper within easy reach. Link to the scraper (Prusa škrabka na cištění bedu):…
Have you ever put a full spool on your MK4/MK3.9 filament holder, and have it come unwound during a side to side print? The left right motion of the print head yanks on the print spool and can make it over-run. Even with brakes on your…
Hepa filter ventilation box attachable to original Prusa enclosure for MK4/s. Placed on hexagon cutout on back of the enclosure. Designed for common vacuum filter: EFH12W EFS1W HEPA H12 HEPA H13 Electrolux HEPA filter Philips HEPA filter…
The Light Bar has now Printed Endcaps. The Diffuser is Printed in White or Clear PETG and clips into the Light Bar. Since the Printz of the Diffuser sometimes is just one or two Layer make sure you use dry and well tuned PETG to work.…
The original is a good idea, just does not work with the big headed hot end on the MK4S, unless you push the printer way back in the enclosure, with this design you do not need to do that and the front of the printer can touch the…
Same as the original model but modified to fit a 6mm diameter magnet.
Intro Changelog: March 1, 2026 - Added several Core One Buffer parts, created new universal spool hub part, reduced overall height by 1.5 inches, built new prototype to confirm Feb 20, 2026 - Initially shared with MK4S focus and tested…
Was having some issues with trying to side-feed my filament into the MK4s. Even with a filament guide it would pull on the drybox sometimes and move it around. Made this so the filament still feeds from the location the printer was…
A dust cover for the extruder inlet. A 3D printer will naturally get dusty. A dusty axis is not that big of a deal usually, and can be wiped down. And a dusty print bed is easily cleaned. But dust in the extruder will cause jams. I'm sure…
LED bar : 17.5 mm x 7 mm Wires external diameter : 1.7 mm 2x M3 x 18 mm screws The bar fits tightly, I don't think larger sizes would fit, but the wires I used fit quite well, so I think slightly larger sizes would fit.
This model is a mounting beam for LED light bars available on Amazon. 15mm x 10mm square, 12" long USB powered style lights. Print two for both sides, I used Prusa Orange PETG.
so i just extend the arm for the fan to use on Ender 3 v3 KE
USB (type A) powered side LED lamp for Prusa MK4/MK4S. Attaches to the X-axis motor. Wire routes out the back and through the X-axis motor wire sleeve into the electronics box. Includes an opening for a power switch. Most of the lamps…
English I created this shell geometry of the Prusa MK4S to check in CAD whether the printer fits into a cabinet and how much space is available around it. The model represents the exact outer dimensions without any clearance and is ideal…
Seeing that the Core One L has the accelerometer in the tool head love board, it seemed that an alternative position could work (as well as this is true with Bambu machines) Seeing the limited space of the MK4s nextruder by the nozzle, I…
This is a support to stabilize the Prusa MK4 / MK4S printer inside the original Prusa Enclosure. It helps to prevent the printer from shaking or wobbling. The supports are placed on the upper frame and push against the top of the…
Fully 3D printable spool holder acting as a universal adapter. It allows the use of the USS Drybox and the original spool holder system from the new Prusa Core One+ / L on Prusa MK series printers (MK3S+, MK4). An ideal solution for…
This is my take on Ball joint mount for Sovol SV06 Plus/MK4S Camera module. To get the parts together I used 2x M4x10 screws with nuts (M4x8 would probably fit better but that is only cosmetic modification). I printed mine because it was…
EDIT 21-Apr-2023: Added an Voron-Edition: https://www.printables.com/de/model/458704-tool-box-toolbox-for-voron-3d-printers-several-ver EDIT 20-Apr-2023: Added an Ender-Edition:…
The colour change is at the 1.80 layer at a 0.2 layer height with a 15% infill you can use the blank and Prusa and original Prusa covers for either the mk4 or the xl/MK4S/MK3.5S/MK3.9S/CORE ONE add a like
Inspired by https://www.thingiverse.com/thing:2843889 I used the one linked above for the Pi3, but needed an upgrade for Pi4 and decided to use a noctua 40x10 fan, as the new raspberry runs a little hotter. This can be mounted on any side…
*** Update September 2024: Added an adapted middle piece that fits the new MK4S cover, that has slightly different dimensions vs. the MK4. *** Update July 2024: I added a remix where the center piece accepts th flush xLCD cover by…
Update 10/07/25: reduced overall thickness to 9.2mm and used the prusa nozzle-tool as reference to avoid collision with the front bar of the Core-One. third hole is also removed…
The text heights are adjusted for printing at 0.15mm increments with a 0.2mm first layer —standard on the basic MK4 profiles. Personally, I printed my covers with a 0.25mm nozzle purely for maximum detail on the text (I’ve added photos to…
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
W tym miejscu znajdziesz elementy aby zamontowac zasilacz na scianie IKEA Skadis oraz adapter do zamontowania w plycie dla latwiejszego podlaczania. Here you will find the components to mount the power supply on the IKEA Skådis wall and…
ESP32-S3-EYE mount for the case used in this tutorial for the Prusa MK4S. You can use a spare M3x18 screw to mount the holder. It might work with older versions but it's not tested. The case used is…
Rozšíření o otvor na vypínač napájení (19,5mm x 12,9mm) / Extension with power switch hole (19.5mm x 12.9mm)
Added cutout on the left side to align cover with cable channel on Nextruder body.
This cover prevents dust from settling in the Z-axis bearings of MK4 and MK4S printers. ... and the printer looks beter :-). The bottom cover is here Prusa MK4/MK4S cover z-axes . You can also check out other improvements to Prusa…
MK4S LCD to enclosure mount, this is to mount the LCD from the MK4S to the enclosure at the same level of case with feet. I printed this with the need of supports. so the parts taht apprear to look like ramps should face up and be the…
The Prusa printers lack a USB port for connecting a camera or other accessories. I use this voltage converter from 24V to 5V with an integrated USB port.. Buck step down měnič DC - 6-24V, 12V/24V na 5V 3A USB The voltage converter is…
This is an Adapter that allows the MK4S xLCD Cover to be mounted onto an original prusa enclosure. You'll need 2 M3 heatset inserts and the original screws.
Remix of DELACK front LCD skirt wall that fits the "3x12sT" special screws. Main changes are the enlarged screw holes in the back to fit the special screws head used on the MK4S xLCD assembly. Use print settings as suggested by 3dsourcerer.
Colored Version for the upgrade Parts from MK4S Wifi Modul and EL-Box Cover Printparameters as Original 15% grid Infill 0,2 Struktur
I made a new version of @ManelTo Electronic Box cover for the MK4S with NFC Reader. Don't forget to place support under the floating arm. (see screenshot) The holes for the square nuts don't need support material ( Floating holes ).…
make adapting mk4s fanduct easier to other printer. 2 sample adaption 4010, and 5020 blower fan
Modified X Carriage Clip with better clearance for the FPC cable on the 3DO Nozzle Cam v2
Cover for elBox - Bear Upgrade Prusa (i3) MK4S
Fan Shroud for a Micro Swiss NG Direct Drive Extruder compatible with the FanDuct of the Prusa MK4S model This project consists of 3 parts: The Fan Shroud itself that sits on top of the Extruder The adapter plates that connect to the…
Gedruckt wurde auf einem MK4S mit 0.4er Düse, PETG. Kein Stützen notwendig. Durch die Hilfe von @Survival88 gibt es nun eine Version mit integrierten Muttern (siehe Schnittzeichnung). Danke für's Mitdenken und Umsetzen! Im Druckvorgang…
I found it easier to assemble the cover to the LCD while printer was powered off and wires unplugged from the LCD. Files to be printed with no supports needed. The cover needs to flex when being pressed onto the LCD. Slide the thick side…
Update: New version added, see updated text below. The injection molded xLCD case that comes with the MK4S looks really great. Unfortunately, if you want to mount it on the outside of the enclosure, you have to remove the back plate to be…
Seitliche Boxen für den PRUSA MK4 / MK4S ich habe meine in Prusament PCCF gedruckt das sie perfekt zum MK4S passen. über likes makes und follower würde ich mich sehr freuen, Peace MazZe
7.07.2026 Added improved version V2 of the ring. Tighter inner diameter tolerance. Two versions looser 12.7mm and tighter 12.6mm. /tested on core one 12.6mm/ Print 0,15 mm 0,4n 4: perimeters
7.07.2026 Added improved version V2 of the ring. Tighter inner diameter tolerance. Two versions looser 12.7mm and tighter 12.6mm. /tested on core one 12.6mm/ Print 0,15 mm 0,4n 4: perimeters
my recommendation is to open either the 3mf that is plain or the one with letters, but you can also see the one that still has the reset cover. I found that it impeded my ability to press the reset button so I ditched it, and placed a…
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG. Sichtstärke hatte ich auf 0,1 gestellt. Mit etwas Druck klippst der Ring unter den Knopf
Hier noch eine Zwangsbelüftung für die Elektronik des MK4 / MK4S als Zubehör für mein Druckergehäuse. Die Idee ist die nicht außerhalb platzierbare Elektronik, beim Drucken mit Zusatzheizung im Gehäuse, vor Überhitzung ui schützen. Ihr…
Print it upside down. Take care not using support (move down the face to the plate)
Remixed this holder to hold a 10mm wide idler pulley. Use of this idler helps minimize belt ripple in your prints. https://www.filastruder.com/collections/hardware/products/gates-2gt-idler?variant=41017736724551 Gates 2GT Idler Toothed…
I reinforced the standard holder because it was too weak.
je l'ai imprimé en PETG avec un remplissage de 25% sans support les vis M3x6 ou M3x8 et les vis molette pour l'intérieur de la box
A remix of @romankozak's adapter , this add-on part for the MK4-family filament guide provides a threaded attachment point for a PTFE tube fitting/coupling, allowing you to route filament coming from a dry box or other accessories. Two…
Latest iteration of a project but I'm not 100% happy with it yet. However it's functional so I figured I'd publish it. Some notes: Extra width of the camera holder probably should cause issues with homing but hasn't proved to be an issue…
Introducing the upgraded Raspberry Pi 4 Mount for the Prusa Mk4S, designed to perfectly complement the latest in 3D printing technology. This refined mount is optimized to ensure seamless compatibility with your Mk4S and OctoPrint setup,…
This is an adapter that allows you to mount the MK4S xLCD to the outside of the enclosure. and usb protect box.
I was very glad to have come across mkoistinen 's excellent PRUSA MK4 Bin model. Very useful for quick disposal of waste filament and minor support elements, in clearing the print bed, and re-setting up between prints. Printed one for…
Hello, The new PRUSA parts are made of injected plastic. Here are xLCD brackets to fix the screen on the Bear MK4S frame For each part use 1 M3x10 screw and 1 M3nS nut Happy printing :)
A 3D model of the Prusa MK4 with MMU3, with Buffer and with Nextruder changes to import into PrusaSlicer
I started with John 's Cable Cover for Prusa MK4/MK4S/MK3 model, but that did not work well for me. The extrusion rail cover segment was oversized (overhanged the edge), and that poor neuron that had finally achieved some reprieve over…
If you're the owner of the MK4 with the original enclosure and with the newer version of the xLCD mounted outside, you probably stumble across a problem when upgrading to MK4S. Within chapter 3 of the upgrade manual it is described how to…
this test shows how fast your filament and nozzle are capable of printing. You can see my results in the attached photos. I compared the following nozzles: Prusa CHT High Flow Prusa ObXidian CHT High Flow Prusa Adapter + Standard E3D…
When upgrading from the MK4 to the MK4S I had the problem hat the display did not fit outside the enclosure anymore, so I printed those adapters. Printed in PETG, no supports, 15% infill. Original has to be turned 180° in the slicer… V2…
The new cooling duct on the MK4S makes it very difficult to remove the silicone sock, since access to the top of the heat block is obstructed. This simple tool is designed to hook the silicone sock, so it can be pulled downward and…
Although I am still waiting for my Upgrade-Kit from MK4 to MK4S I thought about how to keep the fan shroud I use to prevent the Hotend-Fan blowing towards the print bed. I just tried to make a part replacing the metal mounting part for…
Prusa MK4S xLCD display cover protector Ochranný kryt je na vstrekovaný kryt displeja MK4S The protective cover is for the injected display cover MK4S
When upgrading from the MK4 to the MK4S I had the problem hat the display did not fit outside the enclosure anymore, so I printed those adapters. Printed in PETG, no supports, 15% infill.
