MK4S RPi/ESP32 Cam Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.49 – €0.60 net (excluding VAT)
For file: cam holder_0.4n_0.2mm_PETG_MK4S_31m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.54 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 30.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
ESP32 S3 EYE case mount for the MK4S
- Rating
- 4.75 / 5
- Likes
- 72
- Downloads
- 243
- Makes
- 4
- Views
- 1,898
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ESP32-S3-EYE mount for the case used in this tutorial for the Prusa MK4S.
You can use a spare M3x18 screw to mount the holder.
It might work with older versions but it's not tested.
The case used is https://www.printables.com/de/model/933484-esp32-s3-eye-camera-cover-mount.
The mount was derived from https://www.printables.com/de/model/770209-cam-housing-for-rpi-zero-160deg-camera-fits-mk3s-c and https://www.printables.com/de/model/742987-rpi-camera-holder-plumbus.