Counting matching models…
TRAILER An elegant bag clip designed to be printed in place as one piece with minimal supports. Once printed, the clip is freed into 3 hinged components. The design uses a specially designed cam to give the user a mechanical advantage and…
Codemonkey1973's Ender 3 Camera Mount for Raspberry Pi Camera V2.1 was very well designed but I wanted to cleanly route the cable to the back and saw room for improvement. So I rebuilt it with the following improvements: Threaded holes…
You can put it on a stand to frame it as a cool statue.
Version : 1.2. The connection holes on both parts are now increased from DIA 1.8 mm to 1.95 mm. It is reported several times as the holes were too tight. Version : 1.1. The connection holes on both parts are now hidden, when the lid is…
Snap on attachment to have a working hinge on the coffee pot of a technivorm / moccamaster coffee machine. Attach to the existing handle when you break off the not-working hinge parts. Printed with PLA to test the workings, but printing…
Work properly with DJI Phantom 3 Advanced & Professional Category: R/C Vehicles
A M3/M4 bolt (and nut) is needed. Expected bolt dimension: Thread size: M3, M4 Recommended thread length: longer than 20mm min: 15mm with 6mm height trusted washer Bolt head diameter: up to 8.2mm Bolt head height: up to 4.0mm
I wanted to use a Depstech DS620 endoscope camera to inspect the inside of my kitchen sink drains. The issue was that the lens was always sliding through the built up sediment on the bottom of the pipes. This model tries to lift up the…
I really struggled to find anything easier and functional than over complicated and bulky solutions, so I ended designing this. This is not a final design so please if you notice any problem or you have suggestions on how to improve it…
Use TPU filament at 100% infill density and normal supports (no tree). Lay the outside surface down on the plate. Mirror the part in slicer for the other side. As always, I recommend to use the .step file over the .stl file if possible.…
The problem: At night, an overhead porch light just outside the camera's field of view was washing out the image, making the Ring Stickup Cam nearly useless after dark — unless switched to night vision only mode. The solution: A…
Created the model for this AliExpress camera: https://www.aliexpress.us/item/3256807991350522.html Added a 3mf model with supports already painted, only one part needs them. You will need two 1/8" screws and nuts to fix parts in place,…
This bracket is for mounting an ESP32-Cam microcontroller in a bird nesting box. There are fixtures for 5mm LEDs. I use infrared LEDs, so the camera can be used in the dark without visible light. However, this requires a small…
This is a shower screen for the Technivorm Moccamaster Cup-One 1-cup coffee maker. It distributes the hot water for even wetting of the coffee in the filter. Simply place it on the top of the filter holder before brewing (it takes a…
Wedges to raise the view of the rear camera for full time use as a rear view mirror. For full time use, a software mod cam be purchased from Mid City Engineering. I printed these with PETG for durability and heat resistance. ASA would…
Hi ! This is an useful and space saver colander. Feel free to resize and rotate the whole print in yous slicer. (X and Y) It's important to resize all the parts in the same time (the pins and the colander) Be care to the Z height axis…
Holder After printing remove the support, melt in the threaded inserts M3 (2 pcs.) and press in the magnets Ø6x3 (8 pcs.). The height stop is bent 90° and snaps into place (see picture) Camera mount Remove the support, drill out the holes…
I designed a mount and arm that uses Sneaks' articulating mount system to mount the Buddy 3D camera. Link to Sneaks' project (you will need a thumb bolt and nut from his model):…
I needed to hang my camera from a under shelf that holds my filaments over the printer. I remixed this base to strengthen the base (thicker) and placed some screw holes. Thanks for the original designer.
This base mount allows you to use TeachingTech's ball-joint camera mount system on your Flsun v400 (and possibly SR) rail. Specifically made to be short enough to work with enclosures. Currently designed to use phnxdrgn536's hardware…
GIRO.remix - OctoPrint Raspberry Pi Camera Mount General This is a remix of parkis' nicely designed Raspberry Pi Camera Mount for the Prusa i3. I nearly completely redesigned it to make it fit on my 3D printer with a different camera. The…
This is a webcam holder designed for the Flashforge AD5X 3D printer. It is primarily made for the Logitech C270 , but can also be adapted for other similar webcams. The mount can be used together with the original Logitech C270 mounting…
The small woven cord of my camera strap anchor broke. So I designed and printed a replacement anchor. I use it successfully on my Olympus DSLR weighting 0.75 kg. The diameter of the metal ring should not exceed 3 mm. I printed with PLA+,…
Jednoduchý model Camery obscury. Stačí vložit pauzovací papír vystřižený podle fotografií a vybrat clonu s vhodným otvorem a můžete experimentovat. A simple model of a camera obscura. Just insert tracing paper cut out from photos and…
Camera lens rear caps for M42x1, M39x1, Pentax K, Sony E, Nikon F mounts. Print Settings Printer Brand: VoronDesign Printer: Voron 0 **Rafts:** No Supports: No **Resolution:** 0.15mm & 0.4mm nozzle Infill: 100% **Filament:** FDplast ABS…
This is a small camera mount for the valve index. Originally designed for a OV2640 with a XIAO ESP32S3 mounted inside of the headset. I run this with project babble. To install this, you need to cut a bit off the plastic on the seam…
We wanted to use our Apeman C550 dashcam in our new car, so I designed this holder for it. I used thick 3M double sided tape to mount it in the car. Dont use PLA: it will deform in the sunlight. ABS works fine. Support is needed! 2025-09:…
I recently printed and converted my workshop to use the CAMLOCK system designed by @PeterH - it is AMAZING! In doing so, the adapters he designed didn't fit the hose I purchased, so I redesigned to fit. Hose I bought:…
Simple bracket that provides a stable mount for the articulating camera mount (which is such a cool design). It uses the Ender 3 S1 original screen mounting holes and screws (or you can use shorter ones).
Must be printed with TPU or other soft material.
This is a cup tray for the Technivorm Moccamaster Cup-One 1-cup coffee maker. The silly little cup/drip tray that comes with the coffee maker has a circular recess that is clearly designed for the cup included with the machine, and…
This is a remix https://www.thingiverse.com/thing:2448971
Yet another enclosure for the 8Mp LightBurn camera. Uses 6 pcs. 10x3mm neobdymium magnets to hold the cam in place. Camera is just held in place with a pair of adhesive foam-pads. Build-in cable-relief to protect the small connector from…
A small forehead mount for under-the-visor POV mainly for portrait capture. With the right angle, it helps to convey the steepness as close as perceived by the rider. Disclaimer: As with every mount/design, this mount may expose your…
HILOOK Bullet Camera Junction Box This model is a custom junction box / mounting base designed for HILOOK bullet cameras (tested with IPC-B141H-C). It allows a clean and professional installation by hiding all connectors and excess cable…
Simple Logitech Webcam C930e mount for PrintClosure Uses original M3 hole in the corner of the enclosure. Additional: ¼ inch camera screw ( Like this one )
A simple device to add stability to your camp stove when cooking on uneven ground. Five legs work better than the three-legged versions available commercially. The legs fold up underneath into the concave bottom of the can so it doesn't…
Launching the latest toothpaste squeezer inspired by a cute maid character! Key Upgrades: Larger Capacity: Accommodates bigger toothpaste tubes. Improved Grip: Tightened rotation handle (addressing user feedback about slippage on thicker…
Amazon Parts list (US): Brass inserts M4 x 8,1 (Metric) https://amzn.to/3PxrdcE Amazon Parts (EU): Brass inserts M4 x 8,1 (Metric) https://amzn.to/4afwZJB
Added a new version 02/26/15: opened rubber mount holes, relief for rubber flange, trimmed boss to accommodate 2D gimbal bracket. This camera mount plate can be used for both the bottom and top mounting plates. The bosses against the…
This webcam rig holds a webcam above a dicetray. So you can add the webcam to any online game you play with webcams to share your rolling results. This is the 8mm version, made for 8mm thick materials or double layered 4mm. With OBS or…
Designed in tinkercad, printed on ender 3.
Nozzle cam Mintion for XOL toolkit So here it is the adapter XOL for the mintion nozzle cam. It is based on the prusa version but blended all the bits including the electronics board box into the face part of the XOL toolkit . The lid for…
This is a case for external mounting of a Mobius Maxi 4k camera on model rockets with body tube diameters of 3, 4, 5.5 or 7.5 inches. The case mounts using a single #10 or 3/16" screw.
The clear plastic cover for the red status LED on our Technivorm MoccaMaster broke. I modeled and printed a replacement part in clear polycarbonate. It is odd shaped because it grips onto an LED that behind the cover is shaped like a…
Print settings Filament: PLA Layer height: 0.20mm Nozzle: 0.4mm Infill: 15%
This is a webcam mount primarily made for the DuEnder project. The reason I made it is because with this form of CoreXY printer, I was having trouble the webcam shaking violently during printing, causing bad video quality. This mount…
Similar to my other runcam camera mount, but with tapered sides that better fits the profile of the VAS Microwraith and Banshee. Category: R/C Vehicles
This is a small bracket that mounts to the front of a Microsoft LifeCam HD-5000. You can incorporate this into a more complex model, arm, or bracket. Great for making a timelapse camera or adding to your 3D printer. I printed in PLA, at…
EVE outdoor camera wall mount.
OpenIPC RubyFPV Runcam camera base plate mounting
EufyCam 2C Pro Camera Mount for Sunfun Melina Grill Pavilion This custom-designed mount allows you to securely attach your EufyCam 2C Pro to the frame of the Sunfun Melina Grill Pavilion . It ensures a stable and reliable installation…
Camera mounting plate with quick release
Make sure to take apart your webcam and see if the board matches the one shown in the image. I'm not sure how else to identify the model; if you have any ideas please leave a comment. The case snaps shut, but should still be easy enough…
After trying various webcameras in different positions, I’ve learned that ultra-high definition isn’t necessary. And placing the camera away from the heated bed or toolhead may not capture the most exciting angles, but it’s definitely…
Our engineering students make automata to learn about how motion can be graphed and translated to a cam/follower system. Some of these motion studies produce some oddly-shaped cams that aren't amenable to a flat pad follower, which will…
Tiny Whoop Build Up STL Objects: Canopy Camera Mount Buzzer Holder E010 Camera Mount Canopy is very thin so removing support is a precise work. I was successful right after print. Some parts of objects are bend after print with a help of…
Introducing a custom-designed table side support for the IKEA APTITLIG low-height table. This support securely attaches to the table's side, providing stability for holding a cutting table or similar items. While designed specifically for…
I needed a way to mount an esp32-cam case to a metallic surface and had some 20x4mm magnets laying around. I printed this in TPU and it turned out ok. To make it work: Pause the print and insert magnets at the layer just before recesses…
Custom dash camera mounts for rebel 1100 and VSYSTO motorcycle dash camera. May need longer M3 bolts than what came with the camera mount. Has been installed for 2 years now, no issues at all. You would probably want to use a UV resistant…
My simple design for a camera support to use in the whoop drones. 10 and 15 degree version. The v2 has a loop to hold the VTX antena. Printing it in PLA the support may break after a hard hit. I advice to print these in PETG for that…
To connect the Camlock system to my existing dust collection system with DN50 tubes, i modified the camlock joiner. Connector is sized down to 99,6% as it was too tight. If your printer is super accurate, maybe scale it up a tiny bit.
Attach this adapter to your Jelly Bean AT Switch to mount it on any standard camera adapter. Note: this is for the oval Jelly Bean, not the Jelly Bean Twist (use the 3in switch model for that). This file is part of our collection of AT…
Just like the original it uses 2 m2 screws and m2 nuts. Then it clips onto the electronics box of your printer.
This is case was designed to embed all the components needed in the making of a camera shutter by @jamesskelton. Link to his github project page : https://github.com/hackaninstant/Servo-Shutter The box embed : two 3,7v lithium battery for…
I needed to add my Osmo action camera somewhere while doing timelapse videos on my workbench. so I made this tiny clamp suitable for any square tube lamp, such as Tertial from IKEA. printed in PETG 0,16 mm layer with 0,4mm nozzle tiny…
This adapter is a mix of the great adapter by Duc848 on Makerworld join with a male coupling for the camlock system.
Logitech HD Webcam C270 support Camera Raspberry video de surveillance
Adpated raspicamcover_nolense.stl file to fit the newer module 3 cameras
Printed on Reprap Fisher Delta at 15% infill, no supports. Required drilling out the centre hole to 5mm as it was not quite a perfect fit. An M5 nut should be glued in the end with the hex cutout.
A Buddy3d Camera mount for use with a Printer-Box enclosure. This works with the MK3 and MK4 enclosure. # On the MK3 enclosure, it only mounts on the RHS.
This is a stand for a Verbatim wireless charger pad with a cutout for iPhones or other phones with large cameras on the back. The cutout is designed so that the phone can be placed either vertically or horizontally without the pad losing…
Remixed from https://www.thingiverse.com/thing:2258287 I wanted a mount for my Replicator 2, and wanted to build the angles into the mount itself. The original mount has been given a 5 degree down angle and a slight 5 degree turn towards…
Useful item to use your tectectec xpro02 as a dashcam. Sphere ball 17mm insert adapter for tectectec xpro 02. Impossible to find the right accessory to use your xpro02 as a dashcam even though there is a function for it in the camera menu…
Want to use your phone as a webcam, and already own a Quadlock case? This part might help you. Very easy to print, I used the default printer settings, as shown in the screenshot. The support was removable almost without traces. License…
I got a 2x T-Adapter Microscope Lens for my Mirrorless camera and wanted to mount it to my trinocular microscope. I couldn't mount it to the existing hole as I couldn't get it to focus while mounted, so I had to make an extension tube to…
We unplug dash cams when pulling vehicles into our automotive repair shop as part of our policy. We need a way to remind people to plug it back in when finished so it is working and doesn't fall on the owner to do it. Wetness this on the…
Simple sleeve cover for Logitech BRIO webcam. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.1mm Infill: Standard Notes: I rotated flat side down to print avoiding rafts or supports. Might print…
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
Beside printed parts you will need: soldering iron electrical or kapton tape two 13400 li-ion cells (from disposable vapes) LX-LISC-V2 usb-c 2s li-ion charging board super glue Please don't buy your cells. Just pick them up from curbside…
original design is by FabianP on Cults 3D
Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.
Cover on camera ESO32-CAM + Development - programming board with console. Printed from PETG Accessories: ESP32-CAM Development - programming board ISO 14579 or DIN 912 - M3x16 - 3 pieces ISO 14579 or DIN 912 - M3x22 - 4 pieces DIN 934 -…
crochet pour rail 10x5mm (avec ou sans creux) J'utilise sur mon transporter
I needed a way to mount an esp32-cam case to a metallic surface and had some 20x4mm magnets laying around. I printed this in TPU and it turned out ok. To make it work: Pause the print and insert magnets at the layer just before recesses…
I have Raspberry pi Zero W connected to the mother board of my printer Mk3S+ and I bought a Raspi camera wine IR sensor and I designed this flexible holder attached to th motion of axis Z and the Node part can be multiple print depending…
Water Bottle Car Cup Holder Adapter designed for Camelbak Chute 32 oz. Will fit water bottles up to 9.5 cm in diameter (ideally larger than 8.75 cm). Print with support for overhangs or slice into 2 pieces to attach with screws. Planning…
Compatible with enclosure as it acts as both camera holder and panel holder. To mount it, I used an M5X20 screw with an attached nut to make it like an M5X18.
I wanted a way to get some more interesting shots for my Youtube videos, so I designed this small adjustable dolly for my GoPro. Hardware Required: -2x M4x6 Hex Screw -7x ¼ x 18mm Hex Head Bolt -2x ¼ Nut -4x 608 Bearings Supports only…
This is my best recreation of a Chevrolet Camaro. I suggest printing upright with normal supports. -also, could also be used as a finger skateboard :) Have fun printing!
Designed by me to restore a broken camping table. May be of some use to you. Fits tables like the one shown with a leg OD of 20mm (the hole in my bracket is 20.4mm) Supports not needed if you print the brackets with the triangular ribs on…
First: A Warning This plotter was designed for a specific event, as it is the only thing it can draw is “BS5” so if you want it to do anything else you will have to make the cams and you should not assume that this will be easy If you…
This mount can be installed on pipes for Xiaomi 360 Security 2K camera. I printed it in PLA but can be printed in other materials as well.
