Prusa MK4S/MK4/MINI Camera Mount for Xiao ESP32 S3 Sense Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A camera mount for the Xiao ESP32 S3 Sense
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 28
- Makes
- 0
- Views
- 1,071
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A casing for the Xiao ESP32 S3 Sense that is compatible for most Prusa printers, as the mount is attached to the 3030 aluminium extrusion.
Notes:
- I won't be covering the software section of this camera, but you could follow this guide: https://help.prusa3d.com/guide/esp-camera-for-prusa-connect_390199 (might not support the neopixels)
- The examples images are black and white because I used a filter, and not because it is a IR camera
Requires:
- 2x M3x10 Screws (Can be found in MK4/S spare screws)
- 2x M3 T-Nut, Can Be Printed Here: https://www.printables.com/model/727376-t-nut
- 1x 2.4Ghz Antenna from AliExpress: https://www.aliexpress.com/item/1005006745717887.html?spm=a2g0o.order_list.order_list_main.58.6df61802NNeKpA
- 1x OV2640 160° FOV Camera Module (Not required, but recommended)
- 2x 4 Bit Neopixel
To be printed (Recommended to be printed in PETG due to high operating temperatures):
- 1x Xiao ESP32 S3 Sense Case
- 1x Case Mount
- 1x M3 Mount
- 1x SD Card Camera Adapter
Instructions:
1. Solder the two 4 Bit Neopixels together with a thin piece of copper wire
2. Then solder 3 wires from the neopixels to the Xiao ESP32 S3 Sense (Keep wiring as short as possible)

3. Attach the SD Card Camera Adapter by pushing it into the SD Card slot on the Xiao ESP32 S3 Sense
4. Remove the adhesive on the OV2640 module, and stick it onto the SD Card Camera Adapter

5. With the antenna attached, place it into the case first, followed by the Xiao ESP32 S3 Sense and the two 4 Bit Neopixels
6. Attach the Casing with the Case Mount, making sure that they snap together
7. Attach the M3 Mount onto the printer using the two M3x10 Screws and the two M3 T-Nuts
8. Finally, attach them together by aligning the triangle holes together