Temperature sensor mounts for the vcore4 2020 extrusion and Rapido hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Temperature sensor mounts for the vcore4 2020 extrusion and Rapido hotend
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Mounts for temperature sensors:
3mm thermistor for the 2020 extrusion (updated model with less blocking of the extrusion surface)
1.2mm thermocouple for the 2020 extrusion
1.9mm or 3mm thermistor for the Rapido hotend:
The mounts for the extrusion helps locate the sensor at a give place on the extrusion, with relatively constant force while also protecting the sensor from direct airflow. This makes it possible to examine the temperature distribution along the x-gantry with some repetability.
The Rapido hotend thermistor mount secures a thermistor in the Rapido filament path an a given depth. It is also designed to provide some springiness in case a 3mm thermistor is used and the tip needs to be pressed against the 4mm→2mm neck in the filament path.
The mount for hotend is a print-in-place design where the fix block acts as the support for the top bridge.
Printed from ABS, 3 walls of 0.4mm