Temperature sensor mounts for the vcore4 2020 extrusion and Rapido hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Temperature sensor mounts for the vcore4 2020 extrusion and Rapido hotend
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Mounts for temperature sensors:
3mm thermistor for the 2020 extrusion (updated model with less blocking of the extrusion surface)
1.2mm thermocouple for the 2020 extrusion
1.9mm or 3mm thermistor for the Rapido hotend:
The mounts for the extrusion helps locate the sensor at a give place on the extrusion, with relatively constant force while also protecting the sensor from direct airflow. This makes it possible to examine the temperature distribution along the x-gantry with some repetability.
The Rapido hotend thermistor mount secures a thermistor in the Rapido filament path an a given depth. It is also designed to provide some springiness in case a 3mm thermistor is used and the tip needs to be pressed against the 4mm→2mm neck in the filament path.
The mount for hotend is a print-in-place design where the fix block acts as the support for the top bridge.
Printed from ABS, 3 walls of 0.4mm