Liczymy pasujące modele…
This is a remix of a BTT EBB42 toolboard Mount originally posted by mmullerphoto to be used for mounting the BTT EBB42 Gen2 toolboard onto a RatRig vCore 3.1 printer using Eva print carriage system. A shortened cable guide from the Eva…
Mount for Euclid for the Ratrig toolhead beta 2. To fit this, you also need a new front piece for the toolhead, i.e. one that does not have the Pinda mounting tube. The new front piece is included. I made this to make the head lighter,…
I made a support for Eviciv 7 inch screen for 3030 profile with "RatRig V-Core3" written on it. Print Settings Printer: Caribou Duet 320 Rafts: No **Supports:** No Resolution: 200 **Infill:** 15 Filament: Polymaker PETG Black Category: 3D…
***Update January 16 2025 Revised “Back” STL file to improve the tie wrap holes at the bottom to secure the beacon cable. The holes are larger and more robust. ***Update January, 15 2025 Revised "Back" STL file to improve thin wall issues…
Mounting brackets to mount the 1 meter long version of the Blazecut tube. Tries to lift the tube near the ceiling and close by the extrusions, so that it would minimally interfere with the umbilical. Also, the brackets should keep the…
This is an fastener for the Igus chain Series 05 inner width 16mm: https://www.igus.de/iPro/iPro_01_0002_0001_DEde.htm?ArtNr=05.16.038.0 I built it for my RatRig V Core 3 printer where I am using the above chain to carry the bed cables.…
Update 12-04-2022 see below. This mod is for using Ball screw rods instead of the wobbly original lead screws. The ball screws used are the SFU1204 and for the Vcore3 300mm you need the 450mm version. They can be bought from this seller…
This is a remix of a BTT EBB42 toolboard Mount originally posted by mmullerphoto to be used for mounting the BTT EBB42 Gen2 toolboard onto a RatRig vCore 3.1 printer using Eva print carriage system. A shortened cable guide from the Eva…
As with the original, only fits the Vcore3-400 spacing as defined by the spacing between the mounting holes in drawing for the backplate. I also fixed an incomplete fillet and removed the descriptive text on the side as it seemed to add…
Its a corner bracket for the Vcore 3 for the Pi Camera. Sits on top of the right idler and is angled to the center of the build plate. I modeled it for the Vcore 500 but it should work with all variants. Works only with the enclosure. You…
This is the release of Klicky for the VCore3. These parts have all been tested and are working on a few early adopters' machines. Please go to the release blog post or the klicky github for a full installation guide for the Klicky probe.…
with these brackets you can install your noctua 200mm fan on a 3030 aluminum extrusion print settings: nozzle 0.4mm perimeters: 3-4 infill: 20% LH: 0.2 BOM: 2 cap head screw m4x40 4 washer m4 2 hex block nut m4
Super Speedy Spool Holder and filament guide for the RatRig V-core3. It's mounted behind, above the electronics, the design does not interfere with the belt path. Super simple design mounted to the frame with M6x12 cap head screws and M6…
ALPHA NOTICE - This is really UNTESTED The idea is to beeing able to loosen the frame and do very very small adjustments to the frame UPDATE 10/31-2021: Add files for 2020 extrusions for VCore Pro or other 2020 based extrusions Files are…
Its made so you can reuse the existing parts from the filament holder from RatRig, there is lacking a filament guide but it's WIP You need a small spring inside the break - i use one from a ball pen, but if you have something better its…
I wanted a bit more style to my front idlers for the OpenFront mod so I lightly modified them.
This model is a remix of the Jevermeister DIN rail holder. ***ELECTRONICS PANEL MUST DEFINITELY BE 3MM THICK*** The original design from Jevermeister is fantastic but I wanted more flexibility in mounting and remounting DIN rail in the…
Auto rewinding filament spools using gravity to solve the backlash caused by fast-moving printhead Inspired by https://www.printables.com/model/10370-gravity-spoolholder-for-mmu2s
ratrig vcore3.1 dual hwin MGN9 x rail modification
I used the original step files from Ratrig to create this mod. It was hard to get the magnets into the stock magnet mounts for all front / top panels. So I decided to make them “enclosed” to the printed files. I printed the parts with…
This is a remix of LumberjackEngineering's servo deployed Nozzle wiper. With an enclosure on the vcore3 I couldn't fit the servo deployed nozzle wiper for 3030 extrusion anywhere without having interference with the bed, extruder assembly…
The tie downs used to hold the lid down are too short and prevents the lid base from installing properly. This tie down is 2mm longer in the base to correct the issue. Category: 3D Printer Parts
On my VCORE3 500, the stock Ymax endstop did not allow me to place Y=500mm far enough back into the printer and this meant I couldn't print on the bed at any dimension under Y=7mm (instead of Y=0!). The stock Ymax endstop was too big.…
I wanted to create an AWD mod that included front idler tensions, I have this running on mine for about a month now without issues Ive also included the step file as I would love for this to be developed further. Please upload your makes,…
BOM: 10x Acylglas 100mm x 400mm x 5mm 13x 608zz bearings 18x heat insets M3 18x M3 skrews 18x Bowden connector ECAS04 36x Neodym Magnets d:6mm x 3mm some kind of glue i printed the buffer Wheels with no top and bottom layer so you have…
I wanted to mount some LED Stripes to my Printer for better illumination so i made these LED-Stripe Holders. I've got inspired by Bacon2002's design. https://www.printables.com/model/397097-ratrig-v-core-31-enclosure-v2-led-mount I didn't…
Reverse bowden VCore3 Can be mounted on all printers with 3030 extrusions BOM: 1x RB_vcore.stl 1x PC04-M10 1x PTFE tube (ID 3mm OD 4mm) 2x cap head screw M6x12 2x Tnut m6 3030
Here is my ROME setup (for more information on Helge Keck's ROME see https://github.com/HelgeKeck/rome ) for my VCORE3 500 printer. Some of these are remixed versions of Helge's designs and some are original. This is a fully tested setup…
CPAP and Wire Guide for RatRig Vcore3 ^300 with PT1000 mount and shelves Please upload your makes, would love to see them
If you want to use Klicky together with SuperLight Fast-Swap carriage and Gaping Maw and perhaps even openfront tensioners mod such as this one , you might want this. There's other mod for this, but it doesn't fit to me for several…
Update (15.06.23) - Now works with the Orbitor, you will need to print Orbitor Bottom Back Brace Orbitor Filament Sensor Orbitor Top Back Brace Orbitor EBB Mount Update - I have added an additional version of the base (withgantrybase),…
I saw a number of videos on the WobbleX and was very interested in trying it out on my two Rat Rigs. I published this to assist anyone else doing the mod. The PDF file has references to you-tube videos and the link to the github page with…
Design Components: 1. EVA 3 adapter plate for Hermit Crab 2. Pass-thru belt grabbers 3. LGX Lite mounting plate 4. Rat Rig style Pinda mount (modified for this printhead) 6. EVA 3 compatible cooling duct assembly, stretched and clearanced…
The enc2 bowden clamp extended is extended out from the enclosure for better alignment with the filament spool. It uses a 5mmx 50 bolt and 5mm 3030 tnut for mounting. The enc2 spoolholder 3mm mod gives more space from the hardware on the…
Print two universal arms and one crossbar to match your printer size. The 500 crossbar includes a 5mm diameter hole through the length to allow for a 5mm dia carbon fiber rod to add rigidity. The universal arms are mounted to the inboard…
Case display 7" HDMI for RatRig Vcore3 with Enclosure 2.0 without enclosure PRINT SETTINGS: nozzle: 0.4mm perimeters: 4 infill: 15/20% layer height: 0.2mm Top/bottom layers: 3 BOM: 1x BTT Display HDMI 7”…
CPAP box for RatRig VCore 3/3.1 - 200mm → 500mm Print it in whatever material you like. No supports needed. BOM: n.1 Mellow WS7040 CPAP fan n.1 Mellow WS7040 CPAP drive kit n.3 M2.5x5 selftapping screws n.11 M3x6mm brass inserts n.4…
Its a heavily modified version of the ingenious design from Vez3D, exclusively for the VCore3 with the stock MGN12C rail
After cutting the hose cpap hose to size, the raw end wouldn't fit over the hose fitting for the amazing design from @Scrambler77. I designed this adapter so I can slip fit the hose on to the existing adapter. Works with standard 22mm…
These are quick and deadly easy replacements for all the generic 42 mm roller casters. The plates attach as substitute of the metal plates to your VCore. You will just need 2 20 mm hex M6 and 12 mm max heat inserts M6 per corner. As there…
This drawing can be used to cut a bottom panel that fits inside of a RatRig VCore3 500mm printer. This remix allows the installation of the panel without removing the three Z-Axis motors and mounts. The tolerances on this panel are very…
You can apply Vcore4.0 HYbrid XY to Vcore3.1 (or3.0). To do this, you will need to obtain the metal parts used for the Y-belt tensioner and centripetal joiner in Vcore4, and drill holes in the front frame. I used the motor dampers…
The Y-belt tensioner is a proprietary design. I hope that if there are any improvements that need to be made to the design, the brilliant designer will make them.
Integrated BTT SFS2.0 mount in the right-hand side shelf in the back of the printer. Depending on your electronics panel, the mounting hole nearest to the front of the printer might not be in the correct position (it is not for me at…
Mount for Euclid for the Ratrig toolhead beta 2. To fit this, you also need a new front piece for the toolhead, i.e. one that does not have the Pinda mounting tube. The new front piece is included. I made this to make the head lighter,…
